Fuel is money. The more fuel we burn in a Steam boiler, the more money is spent. Hence, even a few percent saving in fuel bills amounts to huge savings annually. Due to this, we provide novel products like Wastetherm, the Waste Heat Recovery Boilers. As the name suggests, the heat going waste from the process like flue gases of Diesel Generator sets is utilized in these boilers to generate hot water or steam. Since no fuel is fired, whatever heat we recover in the boiler is free of cost.
Waste Heat Recovery boilers are designed to recover heat from waste flue gases from DG exhaust, Furnace exhaust, Kiln exhaust, incinerator exhaust etc. to produce steam or hot water based on the application requirements of the plant.
The amount of steam generated or Steam Boilers of heat transferred is controlled by the quantity of heat available in the flue gases. Wastetherm can be fire tube or water tube type as per the design requirements. Tailor-made solutions are offered based on specific requirements of customers and the Wastetherm boiler design is integrated into the system requirements. Since these boilers operate on waste heat, there are no fuel bills to operate these and hence they offer the very handsome payback of investments.
Capacity:-
Wastetherm â?? Waste Heat Recovery Boilers are offered in tailor-made capacities as per requirements.
Waste gases leaving float glass furnace at temperature ranging from 450¡æto 540¡æ have a high potential for heat recovery. ZG Boiler developed float glass kiln waste heat boiler to fully recycle high temperature flue gas from glass kiln and further its waste heat utilization more than 70%. Fumigated wood box, U-steel, steel frame reach to sea transportation requirement.
WASTE HEAT RECOVERY is a process of recovering ENERGY from waste process outputs. These are custom-built equipment or systems designed as per the waste heat available and the process heat load. These are custom-built equipment as per the type waste heat available and the process heat requirements. A detailed study of the client's system is required. These systems can be designed to recover waste heat from high-temperature flue gases of furnaces , DG sets, boilers or any other heat source. The waste heat recovery can be designed in shell and tube type or water tube type design based on the operating pressure of the system. Smoke Tube Type Waste Heat Recovery Systems : Package type boilers is an internal furnace Boiler with a three pass, fully wet back & smoke tube type design. The fuel is charged through a charging door to keep the fire going. Package type is designed to provide low cost heating with minimum operational complexity. Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. Steam Quality is better as Properly Designed Drum Internals are Provided. Provided with accessories like Economizer, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Supplier: Steam boiler, thermic fluid heater, hot air water generator, water treatment, water tube boiler, steam generator, fire tube boiler, boiler india, high pressure boiler, waste heat recovery, electric boiler, industrial boiler, hot water boiler, boiler water treatment, steam boiler , central heating systems, oil fired boilers, electric water boiler, biomass boiler, gas boilers
Supplier: Gas Turbine Power Plants (with Unit Capacity 2.5; 6; 15 and 16 MW), Waste Heat Boilers and Heat Recovery Steam Generators, Gas Turbine Engines Like DZh-59 (15 MW, Zorya - Mashproekt ), AI-20 (2, 5 MW, JSC Motor Sich ), NK-16-18ST (18 MW, KMPO ), MS-5001 (26 MW, General Electric ), LM6000PD-Sprint (45 MW, General Electric ), Auxiliary Equipment Like Air-Cleaning Devices, Noise-Suppression Units, ACS With Higher Level, Heat Exchangers, Convective Blocks, Economizers, Steam Superheaters, Parts of Heavy-Duty Steam Boilers Like Radiation Superheaters, Reheater Panels, High-Frequency (HF) Welded Fin Tubes, Material Such as Carbon Steel, Alloy Steel
105 MW Wartsila HFO Power Plant (7) 15.143 MW Wartsila 18 V 46 Four stroke, Direct Injected, Turbo Charged Heavy Fuel Engines and Generators, Commissioned 2001, 11000 V, 50 HZ, Engines were overhauled and have run between 400 hrs to 9000 hrs. Next overhaul is at 3000 to 11500 hours( depending on the engine) (3) Waste Heat Recovery Boilers:, Cooling system, Lube Oil system, Lubricating Oil System, Control and Monitoring System, Transformers, Electrical System, Pumps, Air System, Exhaust System, Compressed Air System, Tanks and much more. Plant can be purchased as a complete Turnkey Operation on your site if required.
BHMTPMPA is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale. BHMTPMPA has good water-soluble properties and heat tolerance. BHMTPMPA has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C. BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler.
HEDP.Na2 is an organophosphonic acid corrosion inhibitor, it can chelate with Fe, Cu, and Zn ions, it can dissolve the oxidized materials, it has good scale and corrosion inhibition effects even under 250�ºC,it is stable under high pH value, not easy to be hydrolyzed, not easy to be decomposed under normal light and heat condition, its acid/alkaline and chloride oxidation tolerance are better than that of other organophosph- onic acids. HEDP.Na2 can form six-ring chelating compounds with metal ions in water system, Ca2+ in particular. HEDP.Na2 has good scale inhibition effects and obvious dissolution threshold effects. When usedwith other Water Treatment Chemicals, the synergistic effects is better. Application scope and method of use HEDP.Na2 is widely used in circulating cool water system, medium and low-pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc. In light woven industry, HEDP.Na2 is used as detergent for metal and nonmetal. In dyeing industry. The dyes the industry fixing agent in non-cyanide electroplating used as chelating agent.
Supplier: Steam boilers, economizers, heat exchangers, waste heat recovery systems, pressure vessels, storage tanks and critical heavy fabrication work
