Standard Model:used in the occasion for connecting the steel bar in normal situation.
Different Diameter Model:used for connecting the steel bar in different diameters.
Flared Model:used for the steel bar which was hard to match.
Positive And Negative Screw Thread Model:used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
Locking Nut Model:used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Comparison of using laps and rebar coupler: 1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler. 2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete The Characteristics of the Usage Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Drying Type Garlic Peeling Machine Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry . The remarkable features of the machine are as follows 1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root. 2. Automatically split the garlic and peel it. 3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic. 4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment. 5. The machine is clean and undamaged. 6. The machine also has the characteristics of low power consumption and no noise. Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!
Hot eye Onion Peeling Machine Automaitc onion peeling machine with onion root cutting in-one-machine 1 The whole process of onion from feeding, peeling, peeling, root cutting, output and other processes is automated and unmanned, which can save a lot of labor costs. 2 Peel by layers, either more or less. The equipment is designed with a cortex controller, which can be peeled as required. Only one layer of skin can be peeled, or two or three layers of skin can be removed. 3 The peeling is clean and effective. The peeled scallions are clean and good in appearance. 4 The root cutting part is equipped with an onion size recognition mechanism, and the size of the cutting amount can be adjusted randomly to avoid the disadvantage of cutting large onions into small ones and small ones into large ones. 5 Small size, high yield. The equipment design strives to reduce the volume on the premise of increasing the output, so as to apply to various application scenarios such as large, medium and small enterprises and small family workshops.
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
The material of the splicing coupler is constructional quality steel of no.45 steel. Working principle: 1)slice up the end of the rebar; 2)peel the rib of the end of rebar with specialty rib peeling parallel thread rolling machine; 3)connect the two ends of rebar with rib peeling thread coupler; The characteristics of the usage: 1.Standard model: used in the occasion for connecting the steel bar in normal situation. 2.Different diameter model: used for connecting the steel bar in different diameters. 3.Flared model: used for the steel bar which was hard to match. 4.Positive and negative screw thread model: used in the occasion when the two sides both can not be turned but the lengths can be adjusted. 5.Locking nut model: used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
HEBEI YIDA UNITED MACHINERY CO.,LTD., China's Top level-headed & professional manufacturer of rebar coupler and Upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates since 1992. � � Achieved ISO 9001:2008 strictly quality control system certification, and also achieved UK CARES Quality Management System Certification of BS EN ISO 9001. Annual coupler production capacity reaches a leap from 120,000 to 15 million pcs. Performance great by numerous of Important and National Projects, like Pakistan Karachi Nuclear Power Plant, Guinea Hydro power Plant, HK-Macao-Zhuhai longest cross-sea bridge, Ivory Coast Soubre Hydropower Station, and so on.
Rebar Coupler The splicing couplers model is divided into 9 categories according to the Rebar Coupler. (Unit: mm) 1).The parameter of couplers Size(mm) O D�±0.5ï¼?mmï¼? Threadï¼?mmï¼? L�±0.5 (mm) Pitch Rib peeling coupler weight/pc (kg) Thread Angle �¦16 25 M16.5 40 2.0 0.111 60 Degree �¦18 28 M18.5 45 2.5 0.136 �¦20 31 M20.5 50 0.175 �¦22 33 M22.5 55 0.203 �¦25 37 M25.5 60 0.266 �¦28 41 M28.6 70 3.0 0.375 2).The Characteristics of the Usage Mode usage occasion Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut. 3).The material of the splicing coupler The material of the splicing coupler is constructional quality steel of No.45 steel.
1.Standard Model:used in the occasion for connecting the steel bar in normal situation 2.Different Diameter Model:used for connecting the steel bar in different diameters 3.Flared Model:used for the steel bar which was hard to match 4.Positive And Negative Screw Thread Model:used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. 5.Locking Nut Model:used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
The splicing couplers model is divided into 9 categories according to the Rebar Coupler. Standard Model: used in the occasion for connecting the steel bar in normal situation. Different Diameter Model: used for connecting the steel bar in different diameters. Flared Model: used for the steel bar which was hard to match. Positive And Negative Screw Thread Model: Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model: Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut
