Mechanical Bar Screen

Bar Screen type--Mechanical Bar Screen
The entire device is made by SUS-304 with corrosion resistant material
and can be installed quickly and easily.
We have special rake brushes with Acid&Alkali-proof and attrition
resistant design for carrying away and collecting solids much easiler.
This device has a wide range of application, suitable for Civil Discharges,
Chemical Industry, Agriculture, Paper Mill, Tannery, Fishery and so on.
Not only energy saving but also no public hazard.
Besides, we will do customize as client's request.

HF-300-2200 stainless steel Rotary Mechanical bar screen , wastewater treatment bar screen, bar screen for sewage treatment
screen waste remover is composed of main frame, driving device, tooth harrow and transmission chains. Teeth with ABS, nylon 6, nylon 1010 or stainless steel material are ranked on axis to form a seal chain. It pushes waste to flow into tank instead of to the top guided by rail and wheel. And brush will clean the residue on teeth.

It is installed at water inlet of secondary grill and other water intake units where no large particles are in water.
It is also can be used for industrial and municipal sewage of industries such as paper mill, textile, leather, wine and sugar making, fishing etc.

Chain rotor multi teeth screen waste remover is developed on the basis of advance technology from similar products both at home and abroad.
Several teeth (48 pcs) are uniformly placed on chains with certain space, it moves from back of grill to front so as to push waste to discharging
pole along preventing board where waste can be moved by transferring device or presser.

It is suitable for usage at premier and secondary fence of wastewater inlet of wastewater intake units.

Olose O-type grating bars, not L-type grating bars.
Harrow pawl and grating bars never hit each other.
Safety pin breaks automatically if there is something blocked on harrow pawl.
Never block, water flow is never stop.
Electric panel included, rainproof covers are provided to protect the motor and control panel.
Timer control device for 24 hours.

We are supplier and exporter of TMT Rebars.

TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storeyed buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Product Details:
Condition New
Application Fabrication,Pharmaceuticals
Thickness/Diameter 0-1 inch, >4 inch, 2-3 inch, 3-4 inch, 1-2 inch
Shape As per customer shape & size
Surface Finish smooth
Anodised Yes
Range 1 mm to 50 mm
Finishing smooth & rough depend on thickness
Dimensions 500 x 500 x100
Brand Jindal / Outokumpu
Is It Anodised Anodised
Usage/Application Furnace
Surface Finishing CR / HR
Single Piece Length 18 meter, 6 meter, 36 meter, 3 meter, >36 meter,kess than 1 mtr cutting also

Available shapes: Flats, squares and rounds

Tempers: T6, T651, T6511

Specifications: ASTM B211, AMS 4115, AMS 4116, AMS 4117, AMS 4128, AMS-QQ-A-225/8 ASTM B221, AMS4150, AMS 4160, AMS 4161, AMS-QQ-A-200/8

Typical Chemical Composition %Weight %SiFe CuMnMgCrZnTi Each Total

Minimum 0.40 0.15 0.80 0.04

Maximum 0.80 0.70 0.40 0.15 1.20 0.35 0.25 0.15 0.05 0.15

Remainder Aluminum

Typical Mechanical PropertiesTemper Tensile Hardness

Ultimate Yield Elongation Brinell

KSI MPA KSI MPA %

T6, T651 45 310 21 145 25 65

SHOP 6061 ALUMINUM BAR STOCK

* Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc.

Product name : Galvanized Steel Round Bar

Diameter : 16-250mm or Customized

Length : Customized

Advantages : Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9

Tighter tolerances on request

Out of roundness standard: half of diameter tolerance

Finish Line

Straightening machines

Milling and chamfering devices

Surface control (Circograph, Circoflux)

Ultrasonic control device

Antimixing control - spectrotest devices

Packaging, marking

Standard : AiSi, ASTM, BS, GB, JIS, EN,AS ETC.

Surface Treatment : Galvanized

Mechanical Property :

Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending

Bar Processing : Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering
Peeling

Application

* Automatic lathe processing, metal stamping parts processing;

* Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment;

* Household appliances, instrumentation industry;

* Office equipment (computers, photocopiers, cameras, fax machines,
etc.);

* Watch components, glasses;

* Electronic terminal pin, timer, carburetor;

* Decorations, light ornaments, cars, motorcycles, chains;

* Clean car sweepers and toys;

* Pens, handbag accessories, belt buckles, fishing gear, etc .;

* Studs, screws, nuts, pipe joints, spring seats, etc.