Our clients can avail from us, a range of heavily built electro therapy machines TENS AND MS which are designed to provide electro therapy treatments to the clients. These equipment are portable and easy to carry along. One can use these for the treatment and relaxation of muscular and joint pain. Our electro therapy equipment are available at industry leading price.
Features Fully Digital Max 100mA output, 99 steps of intensity control Key Lock Feature Large LCD Display Pause Function Treatment Timer for Patient Compliance Auto-shutoff in 5 minutes if not used Easy to use press button controls Sturdy metal belt clip Low battery indicator Treatment Timer Countdown 9V battery
It s a combination unit of TENS and EMS. It features 5 TENS modes and 2 EMS modes. The pulse width, pulse rate, ramp time, on time, off time and timer are fully adjustable. The user can identify if it is a TENS or EMS mode by the reading on the top of LCD. Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load. Wave Form: Asymmetrical Bi-Phasic Square Pulse Size: 10.1cm(L) x 6.1cm(W) x 2.45cm(H) Weight : 150 grams with battery. On Time: ustable, 2~90 seconds , 1 Sec./ step Off Time: Adjustable, 0~90 seconds , 1 Sec./ step Output Type: TENS and EMS TENS Modes: B, N, M, SD1, SD2 Pulse Rate: Adjustable, from 2 to 150 Hz, 1Hz/Step Pulse Width: Adjustable, from 50 to 300 microseconds, 10¦�s/step Timer: Adjustable, from 5 to 60 minutes or Continuous. EMS Mode: S(Synchronous), A(Alternate) Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, On Time: Adjustable, 2~90 seconds , 1 Sec./ step, Off Time: Adjustable, 2~90 seconds , 1 Sec./ step. Pulse Rate: Adjustable, 2~150 Hz , 1Hz / step. Pulse Width: Adjustable, 50~300¦�s , 10us / step. Timer: Adjustable, 5-60 minutes or Continue. Adjustable in 5 minutes each step
The Digital TENS/EMS is a battery operated pulse generator that sends electrical impulses electrodes to the body and reach the nerves and underlying muscle group. This unit is a combination stimulator of TENS and EMS which can be used for muscle stimulation and pain relief. The device is provided with four controllable output channels, each independent of each other. An electrode pair can be connected to each output channel. The intensity level is controlled by press buttons.
Interferential Therapy (IFT), MS & TENS-We are offering a precision engineered range of IFT + MS + TENS that is a soft touch unit. The circuit of these units is based on micro controller, which makes these very attractive a free from analog knob systems. The unit contains different programs for different type of treatment applications. Our range is widely appreciated for light weight and versatile that able to simplify the placement of treatment electrode in electrical therapy.
PHYSIO KIT (Ultrasound & IFT, TENS, EMS) Now backpack your physiotherapy clinic &deliver the quality treatment This toolkit includes Stim3 (Interferential / TENS / Muscle Stim) and JUS-1 (Ultrasound Therapy) Introducing a Kit containing US FDA Cleared electrotherapy and ultrasound devices for physiotherapist to take for home visits and offer pain relief (chronic and acute) and provide the mobility and wellness to patients..
Supplier: CRCA, CRFH coils (cold rolled), coils (HDGI, GI), galvalume steel coils (GA coils), prepainted galvanized coils (PPGI), HR coils, sheets, plates, special steel ( DSQ plates, cor-ten steel, armour steel, etc.), MS billets, TMT, RE-bars, angles, channel
Buyer: Secondary/ defective/ waste generations of hot rolled/ cold rolled/ galvanized/ painted steel, directly from your factory in form of coils/ slits/ off-cuts
(IFT+TENS+MS+US) :Interferential therapy has its uses in pain relief and muscular contraction. It is used as a technique to achieve either of these when other methods are not appropriate or unavailable, and are often conducted in conjunction with other treatments.
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
