Principle of The Treatment
Diode laser hair removal system is accomplished when destroying the hair follicular unit by the thermal damage of laser fluence and thus inhibiting future hair regrowth by the follicle.
The widely optional pulse duration (Max1500ms) of 808 diode laser system can produce thermal damage in hair matrix stem cells and ensure follicular destruction.
In order to minimize the uncomfortable of thermal damager to surrounding skin cells, an efficient skin--cooling system is used to chill the skin before, during and after the hair removal treatment.
Therefore, 808 diode laser is more effective for hair removal in patients even with dark skin.
808 Diode laser/candela laser best permanent hair removal I Theory 810nm system uses the unique laser with long pulse width 810nm to penetrate into hair follicle.Using the theory of selective optical absorption,laser can be preferentially absorbed by the melanin of the hair. And then the hair shaft and hair follicle are heated rapidly in order to destroy the oxygen-supply organization of and around the hair follicle. The system's unique super-cooling technology could bring about certain anesthetic effect to the epidermis with the output of the laser. Therefore, it could protect the skin from being hurt. As a result, a very safe and effective treatment is realized. II Applications: 1. Hair Removal for all of skin type and hair type. 2. Skin rejuvenation III Advantage 1. The laser wavelength The 810nm near infrared laser of Terminator Hair Removal System is best for absorbing melanin so that it can be applied to different parts and depth of the hair follicle to remove any type of the hair effectively. 2. Long laser pulse width The laser pulse duration of Terminator Hair Removal System is 10ms to 1400ms adjustable, which can impose effective treatments according to different hair to realize permanent hair removal. 3. No pigmentation. Suitable for any kind of skin. 810nm diode laser hair removal system uses the most advanced technology that penetrates deeper than before so that the skin could absorb less laser and there is no pigmentation. 4. Sapphire contact cooling system can make the treatment safer and no harm to the skin.The temperature of skin can be arrive at 0~5°C Sapphire contact cooling system of Terminator hair removal equipment can ensure the doctor could use the maximum energy but not to hurt normal skin. This cooling system can make sure no hurt to the skin when patients are given more pressure. It is reported that the pressure can increase 30%-40% of the luminous energy. 5. The squared big spot size can prompt the treatment speed. 810nm diode laser hair removal machine uses big squared spot size of 20mm which could ensure high efficiency and fast speed when executing the treatment of large area hair removal. Because the spot size is big, it could avoid repeated treatment.
Mode 4. Spot size: 12*12mm2 5. Fluence: Up to 120J/cm 7. Repetition Rate: Up to 10Hz 8. Delivery: Direct coupling thro ng¡ê© 10. Electrical: 110/220V 15A max 50/60Hz 11. Dimensions: 400*550*1250mm 12. Weight: 55Kgs Dimensions: 400*550*1250mm Weight: 55Kgs
600watts Germany Dilas Laser Bars Stacker Warranty: 1 year, support lifetime maintaince Machine handpiece warranty: 20 million effective shots
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
1. Reflect the core technology of 808nm diode laser hair removal system; 2. Treat all skin tyoes from white to dark skin,permanent laser hair removal. 3. Micro-channel laser diode stacks inside. 4. Very high power>150J/cm2(600ms pulse width) guaranteed with test-report. 5. Big pulse width range from 20ms to 1000ms. 6. High repetition rate from 1HZ up to 20HZ(or ever higher up to 50HZ). 7. Small and sharp handle piece for easy holding and rotating. 8. Excellent sapphire cooling tip with -5~0 ¡ãC,freezing cold. 9. Long life time limit of 2,000,000 shots(120J per shot). 10. Low cost for handle piece replacement. 11. One year warranty after delivery. 12. Custom design available(OEM and ODM). 13. International Hair Removal Golden Standard. 14. Safety:Almost no skin scattering, no harm to the skin and sweat glands, no scar, no any side-effect. Woodiness export packing.
Advantages 1. Best quality 808nm handle piece with spot size 1111mm or 1017mm optional; 2.Two pieces of 55w TEC cooler, matched with gold coated cooper sapphire cooling spot can ensure the comfortable treatment feeling; 3. Germany imported 808nm diode laser bar specially for hair removal systems; 4. Advanced technology of imported micro channel cooling chips; 5.High skilled and experienced technicians with mounting capabilities; 6.10K class and part of 1000K class clean room for diode chip assembling; 7.Luxury design of interface and easy navigation for new operators; 8.Two types of water recycling system to ensure the cooling effects; 9.Intelligent temperature control and water conductivity; 10.Lightweight design,easy hold, handle weight is only 300g,easy operation; 11.Very graceful and delicate design of the whole 808nm diode laser machine. Application 1.Best for fast, safe, painless and permannent hair removal on areas like face, arms, armpits, chest, back, bikini, legs and etc. It is also with skin rejuvenation function. 2.Whether you have light, dark or tanned skin, coarse or fine hair, our hair removal solutions achieve maximum results for all areas of the body with treatments that are safe, quick and best of all- virtually painless. Specification Energy Fluence 0~120J/cm2 Wavelength 808nm Frequency 1C--5ºC by cooled Sapphire Spot Size 11x11mm or 10x17mm optional Language English/Italian/Spanish/Portuguese and etc. Touch Screen 10.4' System Cooling Compressor, Water&TEC cooling and fan air cooling Input VAC 220VAC / 50-60Hz or 110VAC / 50-60Hz Frame Size 60cmx60cmx66cm Weight 45KG
Veet Hair Removal Size: 25 gram & 60 gram Available Variants: Normal, SNS, DRY Product of Reckitt Benckiser Indonesia Shipping from Semarang, Indonesia
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
