Oxygen increasing roots blower aeration roots blower
==general clover roots blower use conditions:
1. The content of particulate impurities in the medium generally shall not exceed 100 mg m2, the maximum particle size shall not exceed half of the minimum working gap.
2. Operating temperature of the bearing shall not exceed 95, lubricating oil temperature shall not exceed 65.
3. The use of pressure shall not be higher than the nameplate on the blower under the long-term operation of the boost to avoid motor overload and accidents.
4. Inlet temperature is not higher than 40
==oxygen increasing roots blower for aquaculture of fengyuan series:
Model: fsr65
Flow range:0.8m3 min-3.5m3 min
Pressure range:9.8kpa-78.4kpa
Speed:1100r min-2130 rmin
Power range:0.75kw-7.5kw
==why to choose and install energy-efficient roots blower aerator for aquaculture?
1, the installation of energy efficient oxygen-increasing roots blower, can prevent the bottom of the pond hypoxia.
2.Save electricity or oil costs.
3. Through the installation of energy efficient bottom aeration oxygen increasing roots blower to maintain water quality and improve the pond environment, improve the breeding of aquatic biological disease resistance, which can effectively control the occurrence of disease, reduce medication, reduce drug costs.
==free matched of equipments of oxygen increasing roots blower:
Pressure up to 1000 mbar ( double stage roots blower can reach to 2000 mbar) Vacuum from (-100) mbar to (-800) mbar. Flow capacity up to 800 m3/min ( 48000 m3/min) Workable for air ( roots air blower), gas ( gas blower, gas compressor), steam ( steam compressor, vapor compressor, mvr blower ). Roots blower have two type, one is twin lobe roots blower, the other is tri lobe roots blower. Our tri lobe also called three lobe roots blower, the capacity can reach to 198.1 m3/min (11886 m3/hr), if you need higher flow capacity, then our twin lobe roots blower will be your choice, its flow capacity can reach to 800 m3/min, that is 48000 m3/hr
Product Characteristics Model:CDS series of 3-lobe roots blower Flow:2.02-7.33m3/min Shaft power:0.78-11.47KW Pressure:9.8-68.6kPa Port Dia:80A mm Product Introduction CDS series 3lobe roots blower is our collection for many years of experience in manufacturing blower, using a number of latest research results, professional development of high-tech fan products.The series focused on the current domestic and foreign technical essence of roots blower products, the most efficient use of existing capacity, noise reduction effect of the best special impeller-type line and optimal design of a comprehensive intake and exhaust the whole structure.Using high-precision cnc machining equipment, created painstakingly by professional technical team having many years experience.Therefore the product have high-level technology, high precision, reliable operation, long life. Its technical specifications have reached international advanced level and can replace similar imported products. The products are widely used in environmental water treatment, air transportation, aquaculture, furnace blower, heavy oil burner, gas transportation, electricity, cement, etc. The main features are high stand-alone pressure, high traffic flow, low noise, little vibration, reliable operation.
Supplier: Sonic soot blower, acoustic horn, condensate recovery pump, conednate recovery system, ventury float steam traps, flue gas oxygen analyzers
Product Introduction CDS series 3lobe roots blower is our collection for many years of experience in manufacturing blower, using a number of latest research results, professional development of high-tech fan products.The series focused on the current domestic and foreign technical essence of roots blower products, the most efficient use of existing capacity, noise reduction effect of the best special impeller-type line and optimal design of a comprehensive intake and exhaust the whole structure.Using high-precision cnc machining equipment, created painstakingly by professional technical team having many years experience.Therefore the product have high-level technology, high precision, reliable operation, long life. Its technical specifications have reached international advanced level and can replace similar imported products. The products are widely used in environmental water treatment, air transportation, aquaculture, furnace blower, heavy oil burner, gas transportation, electricity, cement, etc. The main features are high stand-alone pressure, high traffic flow, low noise, little vibration, reliable operation. Product Characteristics Model:CDS series of 3-lobe roots blower Flow:2.02-7.33m3/min Shaft power:0.78-11.47KW Pressure:9.8-68.6kPa Port Dia:80A mm
Supplier: Roots blower, blower, vacuum pump
Supplier: Packaged sewage treatment plants, effluent treatment plants, water treatment plants, ro plants, water softeners, drinking water purification plants, river/well water purification plants., amc for stp/etp, augmentation and servicing of existing stp, etp, wtp, ro, air blower, roots blower, kpt blower sales and service., centrifugal fans, axial and tube axial fans, id/fd fans, degasser blowers
Buyer: Pumps
Ppi pumps pvt. Ltd. Is one of the leading vacuum pump manufacturers, exporters and suppliers in india providing vacuum pumps of different sizes and capacities like liquid ring vacuum pump for paper and sugar mills, single cone vacuum pump for process industries & power plants, close couple vacuum pump for plastic industries and breweries bottlinear plant, two stage vacuum pumps for chemicals and pharmaceutical process industries, twin lobe roots blower and chemical process pump for cement, fertilizer & effluent treatment plants along with all types of vacuum pump spares parts from iso 9001: 2008 certified company having modern infrastructure for vacuum pumps manufacturing process. Inquiries are appreciable if you are looking for any kind of vacuum pump, nash vacuum pump or water ring vacuum pump.
What is Wollastonite? Wollastonite is a calcium, silicon, and oxygen-based industrial mineral. It is generally white, although it can also be colorless or gray. CaSiO3 is the molecular formula of Wollastonite. 2.86-3.09 is the specific gravity of it. What are the Purposes of using Wollastonite? Wollastonite increases weather resistance, lowers brightness and coloring, and works as a flatting and suspension agent, as well as performing as a smoothing and suspending agent. What are the Specifications? Specifications of Wollastonite Serial No Technical Index Percentage (%) 1 SiO2 53.78 2 CaO 43.41 3 Fe2O3 0.39 4 MgO 0.95 5 Whiteness 90.52 6 Mesh(325) 3.00% 7 HCl insoluble matter 0.25% What are the Uses in Ceramics? Wollastonite is used in the manufacture of ceramics. It reduces firing and drying shrinkage, and lowers the temperature at which the glasslike stage is constructed. It minimizes instability and glaze problems in ceramic production and reduces shrinkage and gas expansion. What are the other Applications? In spite of being used in ceramics, wollastonite is also used in plastics, steel, and in the production of paints and coatings.
Supplier: Liquid ring vacuum pumps, rotary vane vacuum pumps, centrifugal water pumps, roots vacuum pumps, side channel blower