The emulator of an immobilizer for motorcycles and scooters yamaha.
Works with all motorcycles and scooters yamaha from 2006 to 2009.
Does not demand programmingonly need is connect wires.
Completely emulates work of a regular immobilizer, including light-emitting diode work on the instrument panel.
For emulator installation in the case of a regular immobilizer:
1. Remove glue hermetic from the immobilizer case.
2. Take out a pcb from immobilizer and desolder from it wires.
3. Connect the emulator according to drawing more low.
4. Insert the emulator into the immobilizer case.
Colouring of wires and their appointment:
Black (2 pcs.) gnd
Red batt (+12v)
Yellow ign (+12v)
Gray led (+5v)
Blue k-line immo-ecu
What you have to pay attention when using this tool?
1. Your computer must be windows XP system.
2. Please choose area EUROPEAN when you installing the software. Then it will not ask you for activation code.
Description:
MVCI is a high performance factory diagnostics for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.
Specification:
1.Worked car model
Honda, Toyota, Lexus and Volvo.
2.Feature:
Fully compatible with Toyota TIS Techstream
Supports Diagnostics, Reprogramming, Active tests, and key programming
Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics
Fully compatible with SAE J2534
Programmable power supply
Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector
Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector
RGB status LEDs
3.Supported Protocols:
Operating Temperature: -20 to 70
Storage Temperature: -40 to 85
Diagnostic Interface: 16 PIN
USB Interface: USB 2.0
Power: DC 5 V - 36 V
Consumption: 0.7 W
Dimensions: 23CM x 16CMx 9CM.
Package list:
1. User Manual: Instructions on tool operations
2. Driver CD: Includes user manual, drivers, and etc.
3. OBD II cable: Communicates between tool and vehicle
4. USB cable: Communicates between tool and PC/Laptop
5. Carry case: A nylon case to store the tool when not in use.
6. Main unit.
