A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gate and globe valves, but they lack their fine control in throttling applications.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Trunnion Mounted Ball Valve Trunnion mounted ball valve is used to industrial pipeline and long-distance transportation pipeline for various corrosive and non-corrosive medium, such as water, steam, oil, gas, liquefied Gas, natural gas, nitric acid, acetic acid, strong oxidizer, urea etc. According to different working conditions, there are two types of valve body structure choices: 2 pieces and 3 pieces split body . Specification: Size:2~56 Pressure Rating: Class150~2500LB Main Materials: WCB, LCC, LCB, WC6, 4A, CF8, CF8M, CF3, CF3M, CF8C, A105, F11, F22, F304, F316, F321 etc. Design and Manufacture: API 6D, API608, ASME B16.34 Face-to-Face:ASME B16.10, API 6D Anti-static: API 6D Ends Connection: Flange, Butt Welding Fire Proof: API 607, SIO 10497 Inspection & Testing: API 598, API 6D Operator: Manual, Worm Gear, Electric, Pneumatic, Manual-Air-Hydraulic. Feature: Double Block & Bleed Cavity Pressure Self Relief Optional Double Piston Design Emergency Sealant Injection Full Bore or Reduce Bore Blow-out Proof Stem
Trunnion mounted designs for forged steel trunnion mounted ball valve is available for over 2" size and are generally used for higher pressure. Three pieces body, blow-out proof stem, antistatic device, fire-safe designed and certified, double block and bleed, self relieving. Execution could be full bore or reduced bore, and materials can be carbon steel, stainless steel, special alloys resilient or metal seated These have the ball mounted on trunnions supported in body bearings above and below the ball. sealing is achieved by spring loaded piston type seats which shut off flow when line pressure acts on the upstream seat. This design provides automatic rilief of cavity overpressure. Features: 1: Three Pieces Forged Steel Body; 2: Trunnion Mounted Ball type; 3: Full & Reduced Bore types; 4: Anti-Static device design; 5: Blow-out proof stem design; 6: Double Block and Bleed, DBB design; 7: Fire Safe Design 8: With vent valve & drain valve; 9: Lifting lugs & supporting feet for 8" & Larger sizes. Plywood case.
Ball valves, TFC China. Sea worthy plywood cases.
TRUNNION MOUNTED BALL VALVES Bonny Valve has very extended experience in manufacturing of Trunnion Mounted Ball Valves Size 2" to 48"(DN50 to DN1200) Pressure Rating: ASME 150#, 300#, 600#, 900#, 1500#, 2500# Materials: Forging and Casting Type Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc. Seating: Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated End Connection: Flanged FF/RF/RTJ, BW Ends Operator: Lever/Wrench, Gear Operated Specification: Design API 6D / API 608 / BS5351 / ASME B16.34 Face to Face ASME B16.10/API 6D End Flange ASME B16.5 BW End ASME B16.25 Test API598/API 6D Fire Safe Test API607/API6FA Special NACE MR-01-75 Features: Bolted Body Two Piece / Three Piece Bore Type Reduced Bore or Full Bore Anti-Static Device Blow-Out Proof Stem Fire Safe Design Emergency Sealant Injector Double Block and Bleed
Characteristics of api trunnion mounted ball valve 1. Design and manufacture of ptoduct according to american state standard ansi b16.34, american petroleum institute standard api608 api6d. 2. Liquid resistance smallest of all type of valve. 3. Open quickly, only turn on 90 degree may finilsh open and close. 4. Seat material use teflon or r-teflon, low friction, seal reliable open and close lightly. 5. Movement of ball on the middle of valve seat has wipe function so may suit medium of suspending granule. 6. Stem use back seal and hyperbatic structre which may prevent medium to striking stem on the condition of pressure. 7. According to the need of consumer, may design for anti-static electricity, fireproop and use a locker to prevent wrong operator. 8. Body of ball can be floated or fixed accordance with the of strength of opening and closing. Seat of fixed ball valve floatablerealize seal purpose depend on piston effect of medium pressure so to lighten the strength of open and close.
Size : 1/2" To 24" (15MM To 600MM) Class/Pressure: #150 To #4500 End Connection : Flange, Buttweld, Socket Weld , NPT, Etc Design Standard : API 6D, ISO 14313, etc Testing Standard : API 6D, API 598, API 607, API 6FA, etc Body Material : Carbon Steel,Alloy Steel, Stainless Steel, Special Material Also Available
China bs standard ball valve: bs 5351 trunnion mounted ball valves, forged steel, alloy steel, f304, f316, f321, 150lb-2500lb, side entry, top entry. Features: Side entry/top entry. Two/three pieces design. Full & reduced bore. Anti-stactic device. Blow-out proof stem. Fire safe design.
Three-piece trunnion mounted ball valve Usage: Natural gas, oil products, chemical engineering, metallurgy, city building, enviroment protection, pharmacy and food industries etc. Pressure: Class 150~2500 lbs Main materials: Astm a216-wcb a105 etc or as per customer's requirements 2/1"-36"
