Manufactured in three pieces to facilitate replacement on plants which requires frequent maintenance.
Ends: female threads as per uni/iso 7/1 rp; pocket welding; butt welding.
Working temperature: from -20°c to +150°c
Working pressure: see diagram.
Fluid range: air, water, gas, petroleum and petrochemical products, aggressive media.
Head of the valve as per iso 5211 specifications.
The manual version (with lever) doesn't have the iso 5211 top work and its therefore not possible to mount on it any kind of actuators
Manufactured in three pieces to facilitate replacement on plants which requires frequent maintenance. Ends: female threads as per uni/iso 7/1 rp; pocket welding; butt welding. Standard seals: ptfe. Working temperature: from -20°c to +180°c Working pressure: see diagram. Fluid range: air, water, gas, petroleum and petrochemical products, aggressive media. Head of the valve as per iso 5211 specifications.
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, textile fiber, rubber, plastic, paint drier, plasticizer, flame retardant, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, ms pipe, pipe fitting, flange, fasteners, steel wire
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option