Scope
This instrument can be used to determine the absolute viscosity of Newton liquid. Widely used in oil, paint, pulp, textile, food, medicine, adhesives, cosmetics and other production industries and research units. The instrument has the advantages of accurate, rapid, intuitive and simple measurement, and it can be used in various industries.
Features
1, this instrument uses the LCD display, the key mark is clear, the procedure design, the operation is simple
2, the instrument uses a 16 bit microcomputer processor as the core of the stepper motor with high breakdown drive, stable speed, accurate
3, this instrument adopts the procedure design, the operation is simple and convenient, the alarm function, the screen directly shows the viscosity, the rotational speed, the percentage of the torque, the rotor number
4, the temperature measurement range of the instrument is -20 C -100 C, wide temperature range detection.
5, the main control board of the instrument, the subdivision driver board all use the patch technology, circuit design using the current most advanced microcomputer processor, reasonable and compact structure layout. The instrument has a full range, all of the linearity of the measurement calibration through the PC interface, its measurement performance and function to achieve the same type of domestic advanced level.
Technical Parameters
1. Measuring range: 1—2000,000 cp, If less than 20cp, you need to select the 0#rotor
2. Unit conversion: 1pa.s = 1000 mpa.s, 1pa = 100mpa.s, 1mpa.s = 1 cp
3. Spinning speed: 0.3, 0.6, 1.5, 3, 6, 12, 30, 60, eight kinds of speed control, automatic adjustment, imported motor
4. Measuring range Display: The instrument can automatically display the measurable maximum viscosity value of the combination of rotor and rotating speed.
5. Scan function: According to the viscosity value of the test samples, the machine can be automatically prompted to give the best combination of the rotor speed
6. Number of rotors: Random configuration No. 1 3, 2, and 4 four kinds of rotor
7. Peripheral Interface: a R232C communication interface, a temperature probe interface, a power jack
8. Measurement accuracy: = ± 2.0% (Newtonian liquid)
9. Reproducibility: ± 0.5%
10. Power supply: 110V-230V, 50HZ / 60HZ
Sodium alginate Sodium alginate is a polymer carbohydrates extracted from seaweeds. With its features of high content of mannuronic, acid, it is good as printing thickner in textile industry and good as thickening film and gelforming additives in food and soft drinking industry. Quality standard pale yellowish powder, 100% pass through 30 mesh. Moisture:15%max. Ph value:6-8(in 1% solution) Calcium content:0.% max. Grade the following grades differed by diffderent viscosity: Extra low viscosity:10-50 cps 50-100 cps Medium low viscosity:200 +50 cps 300 +50cps Medium viscosity: 400 +50 cps High viscosity:500 +50 cps 600-800 cps Extra high viscosity:1000í+100 cps Viscosity tested basis on 1% solution (natrual basis) at 20ípc by brookfield viscometer rvt. 25kg or 50kg bags
VAMCELL™ MHPC Hydroxy Propyl Methyl Cellulose VAMCELL™ is our registered trademark of Hydroxy Propyl Methyl Cellulose. Introduction VAMCELL™ HPMC is made by propylene oxide, methyl chloride with alkali-cellulose after a chemical process called Etherification under rigidly controlled conditions. The resultant nonionic polymer is purified, dried and ground to a fine white powder, this water-insoluble cellulose is turned into water-soluble nonionic polymer, HPMC is a good film-former and varies somewhat in physical and chemical properties. HPMC is quite hydrophilic and readily soluble in cold water. CAS NO: 9004-65-3 Appearance: white or slightly yellow powder Taste: odorless and tasteless Carbonization temperature: 280-300? Bulk density:0.25-0.70g/cm³ True specific gravity: 1.26-1.31 * Viscometer: Brookfield RVT 2% sol. 20 5---75000 Properties Good water retention capacity Improved adhesion and sliding resistance Developing workability Prolonging open time Good wetting ability Increased mortar yield Application Construction industry Cosmetic& Personal Care Paint industry Detergents Oilfield industry Pharmaceutical materials Food additives Polymerization Special application Package 25kg net paper compound plastic bags with PE inner liner 500kg jumbo bags with PE inner liner On clients’ requirement Storage and Transportation Keep dry and clean conditions, away from heat and sunlight. Stored in sealed original bags. It is classified as a non-hazardous goods. Safety Notice The above date is in accordance with our knowledge and experience of time, but don’t absolve the clients carefully checking it all immediately on receipt. To avoid the different formulation and different raw materials, please do more testing before using it. And we reserve the right to alter our product and without informing in advance. Please read the material safety data sheet before using it. Our main products cover: Vinnate™ Redisposible Polymer Powder, Vemcell™ MC, HPMC, HEMC, Thylocell™ HEC Forca™ Calcium Formate, Polyfiber™ PP Fibers.
