41Ch 100G Athermal Awg (41Ch 100G Aawg)

Flyin optronics offers a full range of thermal/athermal awg products, including 50ghz, 100ghz and 200ghz thermal/athermal awg. Here we present the generic specification for the 40-channel 100ghz flat top thermal awg (40 channel tawg) mux/demux component supplied for use in dwdm system. Flyin's 40 channel 100g thermal awg(100g tawg) is designed for use within the c -band release of dwdm system. To decrease the power dissipation of the devices in different environmental conditions, the tawg package is special designed with selection of reliable thermal plastic with low thermal conduction, and the tawg operating temperature is controlled by using foil resist heater or peltier tec with thermistor temperature sensor. Different input and output fibers, such as sm fibers, mm fibers and pm fiber can be selected to meet different applications. We can also offer different product packages, inluding special metal box and 19" 1u rackmount. The planar dwdm components(thermal/athermal awg) from flyin optronics are fully qualified according to telcordia reliability assurance requirements for fiber optic and opto-electronic components (gr-1221-core/unc, generic reliability assurance requirements for fiber optic branching components, and telcordia tr-nwt-000468, reliability assurance practices for opto-electronic devices).

Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR

GLsun QSFP28-100G-LR4 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four electric-absorption modulated lasers (DMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Compatible Cisco Form Factor QSFP28 Max Data Rate 28Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type LAN WDM DML Extinction Ratio 4dB Media SMF Power Consumption

GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.

Product Features 4 WDM lanes MUX/DEMUX design 4 WDM channels are 1296, 1300, 1305 and 1309 nm Hot-pluggable CFP2 footprint RoHS compliant and Lead Free Up to 10Km link length Power dissipation

00G data rate Support line rates from 103.125 Gbps to 111.81 Gbps Up to 300m based on MMF ,40km on SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Electrically hot-pluggable Compliant with QSFP28 MSA with LC connector Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH

USD110 for 100G rate QSFP optical transceiver module 155M-400G optical transceiver modules We provide 155M-400G rate optical transceiver modules that are compatible with different brands of switches (e.g., Cisco,Huawei,H3C,ZTE,Dell,HP,Mellanox,Mikrotik,Netgear,Brocade,Juniper,Extreme,Quidway,Aruba,Intel,etc.).These optical transceiver modules with wavelengths ranging from 850nm to 1610nm are available in SFP,SFP+,XFP,X2, XENPAK,SFP28,QSFP+,QSFP28 packages.Transmission distances are LRM,SR,LR,ER,ZR,and up to 160 km. Our optical transceiver modules have competitive prices. For example,the unit price of optical transceiver module that replace the Cisco SFP-10G-SR is around USD14 FOB China,and the unit price of optical transceiver module that replace the Cisco QSFP-100G-SR4 is around USD110 FOB China. Welcome to purchase our optical transceiver modules.Thanks.

Up to 27.952Gbps Data rate per channel.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.

Product Function Hot pluggable QSFP28 MSA form factor Up to 80km reach for G.652 SMF with transport white box Single +3.3V power supply Temperature Range 0 to 70�°C Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA Receiver: 2*27.5Gbaud/s Pin-PD ROSA 4*25G CAUI4 electrical interface Integrated SFEC with high coding gain PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible Dual CS adaptor Compatible with RoHS6