Scope
The applicable standard: sh/t0325, astm d942
The applicable range: using oxygen bomb method to determine the oxidation stability of grease.
Features
1. Integrated design, easy operation and maintenance;
2. Pid temperature control temperature control system, high precision and stable;
3. Automatic timing, alarm system;
4. The results of the double bomb, to facilitate the operation of parallel experiments.
Technical parameters
1. The applicable standard: sh/t0325, astm d942;
2. Input voltage: ac220v ± 10%, 50hz;
3. Measuring range: room temperature -200°c;
4. Heating power: 1.8kw;
5. Temperature control accuracy: ± 0.5 °c, 113 ± 3°c;
6. Dimensions: 540 × 380 × 490mm.
Scope The applicable standard: SH/T0325, ASTM D942 The applicable range: Using oxygen bomb method to determine the oxidation stability of grease. Features 1. Integrated design, easy operation and maintenance; 2. PID temperature control temperature control system, high precision and stable; 3. Automatic timing, alarm system; 4. The results of the double bomb, to facilitate the operation of parallel experiments. Technical Parameters 1, applicable standard: SH/T0325, ASTM D942; 2, input voltage: AC220V ± 10%, 50Hz; 3, measuring range: room temperature -200°C; 4, heating power: 1.8KW; 5, temperature control accuracy: ± 0.5 °C, 113 ± 3°C; 6, dimensions: 540 � 380 � 490mm.
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3 Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits. We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains. These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Features 1, oxidation stability of gasoline tester is split desktop, compact, easy to operate, and comfortable. 2, oxidation stability of gasoline tester can simultaneously accommodate two GB / T8018 standard oxygen bomb, oxygen Bouncing body good sealing performance, easy assembly and disassembly. 3, oxidation stability of gasoline tester tub made of stainless steel, rust-proof and durable. 4, oxidation stability of gasoline tester direct condensation by oxidation bath cover, bath closed due to oxidation, good condensing performance, an experiment without rehydration. 5, the oxidation stability of gasoline tester using the time proportional to adjust the temperature, the heating power can be adjusted within the range of 0 ~ 2000W.
Melting point 151-154 C(lit.) Boiling point 265 C100 mm Hg(lit.) Density 1,36 g/cm3 vapor density 5 (vs air) vapor pressure 1 mm Hg ( 159.5 C) refractive index 1.4880 FEMA 2011 | ADIPIC ACID Flash point 385 F storage temp. Store below +30C. solubility methanol: 0.1 g/mL, clear, colorless pka 4.43(at 25) form Solid color White Odor wh. monoclinic prisms, pract. odorless PH 3.74(1 mM solution);3.22(10 mM solution);2.71(100 mM solution); Water Solubility 1.44 g/100 mL (15 C) Merck 14,162 JECFA Number 623 BRN 1209788 Exposure limits ACGIH: TWA 5 mg/m3 Stability Stable. Substances to be avoided include ammonia, strong oxidizing agents. InChIKey WNLRTRBMVRJNCN-UHFFFAOYSA-N LogP 0.09 at 25â?? FDA 21 CFR 184.1009; 582.1009; 175.300; 175.320; 177.1680 Substances Added to Food (formerly EAFUS) ADIPIC ACID SCOGS (Select Committee on GRAS Substances) Adipic acid CAS DataBase Reference 124-04-9(CAS DataBase Reference) EWG's Food Scores 1 FDA UNII 76A0JE0FKJ NIST Chemistry Reference Hexanedioic acid(124-04-9) EPA Substance Registry System Adipic acid (124-04-9)
Scope Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to sh / t0175-94, astmd2274 and other standards to determine the initial boiling point of not lower than 175 ?, 90% point distillation temperature no higher than 370 ? of middle distillate fuels inherent stability and performance of the oil. I.E., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change. Features 1, the fixed value regulator valve to provide a constant flow of oxygen test. 2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested. 3, oxidation tube with radial clamping, easy operation and reliable. 4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature 5, sample oxidation time automatic control, when the alarm system. 6, the instrument uses metal bath, heating speed, good stability, environmental protection Technical parameters 1, oxidation flowmeter: six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min. 2, constant temperature bath: the use of fld metal bath. 3, the thermometer: in line with gb / t514-83 standard, wlh-33c, 50-100 ?, 0.5 ? indexing rod 4. Temperature control mode: automatic heating, automatic temperature control 5, temperature accuracy: 95 ± 0.2 ? 6, oxidation tube: borosilicate glass, in line with sh / t0175-94 standard 7, electric heaters: when the main heater 220v 2500w, auxiliary heating 800w. 8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve
Magnesium oxide, often referred to as magnesia, is a white, odorless, and alkaline solid with the chemical formula MgO. It is recognized for its diverse applications across industries. In healthcare, it is used as an antacid to relieve heartburn and indigestion, as well as a magnesium supplement. In the construction sector, magnesium oxide is utilized as a refractory material in kiln linings and as a fireproofing agent in building materials. It also plays a role in metallurgy as a refractory lining material for furnaces. Additionally, magnesium oxide finds application in the production of electrical insulators, as a catalyst in chemical processes, and as a stabilizer in some food products. Its ability to withstand high temperatures, neutralize acidity, and serve various functions highlights its importance in different industrial and consumer applications.
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
Transformer Oil is highly purified non-inhibited high performance mineral oil of Class 1 category of electrical insulation oils, confirming to IS 335:1993 It is use to insulate and cool transformer coil and to quench� electric� arcs� that� form between� contacts� of� switchgears,� circuit� breakers� and� rheostats� using� mineral insulating oil. BENEFITS High insulating capacity. Effective cooling and heat dissipation due to low viscosity. Minimum risk of fire due to very high flash point. High demtilsibility to ensure good separation of water in case of accidental pollution. No impurities e.g. water, dissolved gases suspended solids, etc.. Excellent oxidation stability. Minimum consumption of product due to low volatility at operating temperatures.
Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems. APPLICATION For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil. Beneftts Excellent anti-wear protection, oxidation resistance and thermal stability. Excellent demulsibility facilitates spontaneous separation of the oil from water ingress. Low pour-point enables a wide range of application at different temperatures. The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency. The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.