"land drain" is the water draining material (prefabricated vertical drain, pvd) for soft supporting soil improvement. It has been applied in a variety of civil engineering sites such as earth filling for harbor, reclamation, road, railway and airport.
Based on accumulated r&d, it will help many kinds of development works with its low cost and stable work performance.
Geco industrial co., ltd is located in south korea and has been produced this item over 20 years.
"land drain" is highly economical.
It can save the cost of works up to by 20-50%, compared to sand drain, given that the same water draining performance is attained.
"land drain" is speedy for driving.
As the drain boards are light weight and easy for handling, they can be driven quickly into the subsoil. With a simple driving system weighting 3 to 5 tons, drain boards covering a length of about max. 25, 000m can be driven per a day.
"land drain" is highly suitable for even very weak soil.
Drain boards possess a permeability that is practically the same even if the soil pressure is 6kg/cm2, a pressure corresponding to a depth of about 50 meters.
For more information, please simply visit our website (http://gecoind.Com) and contact us by e-mail.
Supplier: Sawn timber wood,furniture,cardboard box,plastic,textile & garment, herbs& spices,coconut wood,rattan cane,rattan cane webbing,rattan panjang,rattan manao,semi poles,rattan kubu,rattan core,rattan batang skin,rattan batang polish,rattan batang,gaharu ambon,charcoal,aluminum foil, fabric,teak wood,meranti wood,merbau wood,albasia wood,iron wood,mahogany wood,sandalwood,sungkai wood,bangkirai wood ,camphor wood,sonokeling,rosewood,pine wood,palm wood,mango wood, rubber wood,spruce wood,finger join wood board,bamboo,coconut,getah damar,gum copal,universal glove, copra,yellow sweet yam,white yam,purple yam,cassava,beetroot, kalsi board,film faced plywood,plywood,face veneer, virgin coconut oil,betel nut,coconut oil,nutmeg and mace,mustard seed,ginger,fenugreek,coffee,clove,turmeric,chili,cassia bark, cardamom,black pepper,sugarcane,red onion,dll
Supplier: 1. coco peat (coir pith), coir rugs,
2. textile chemicals, polysols, binders, thickeners and many other
industrial chemicals,
3. sugar confectionary products like lollipop etc.
4. eco friendly, sugarcane and paper packaging products like coffee/tea cups, beverage cups all sizes, takeaway lunch boxes, straws, etc.
5. frozen indian snacks like samosa, patties, mix veggies, all kinds of indian snacks and frozen foods.
6. pvd coated sanitary ware like kitchen sinks, basins, railing, taps, and other furniture with elegant polishes of gold, rose gold, black, silver, multi color, champagne colour, etc in different textures.
7. dehydrated vegetable and fruit powders like, dehydrated garlic powder, ginger powder, chickoo powder, etc.
8. onions
9. all kinds of supermarket items
Services: Export and import
Buyer: Mct oil : grade e 7000, e7030, e6040
(best quality)
Fabric & Textile products is still needed throughout the world, it can have significant impact on price increases. We provide this Fabric & Textile on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell. We, Nif International, hope to be the best export-import partner for you around the world.
Cotton is a soft, fluffy staple fiber that grows in a boll, or protective case, around the seeds of the cotton plants of the genus Gossypium in the mallow family Malvaceae. The fiber is almost pure cellulose, and can contain minor percentages of waxes, fats, pectins, and water.
Product Features 1. **Bidirectional Stretch**: - Capable of stretching in both longitudinal and transverse directions, providing full-range freedom of movement. - Strong fabric resilience, maintaining its shape and not easily deforming. 2. **High Comfort**: - Soft and smooth texture, gentle on the skin, reducing friction. - Good breathability, keeping you dry and comfortable, suitable for prolonged wear. 3. **Durability**: - Excellent tear resistance, able to withstand high-intensity activities and multiple washes. - Fabric retains color well, ensuring long-lasting vibrant colors. 4. **Functionality**: - Moisture-wicking feature, quickly absorbs and evaporates sweat, keeping the body dry. - Offers some UV protection, suitable for outdoor activities. Material Composition: Four-way stretch fabric is typically made from a blend of polyester fiber and spandex, where polyester provides strength and durability, and spandex provides elasticity. The fabric composition ratio may be: Polyester Fiber: 80-90% Spandex: 10-20% Application Scenarios: Sportswear: Suitable for activities such as running, fitness training, yoga, cycling, requiring high flexibility. Provides support and protection, enhancing athletic performance. Swimwear: High elasticity and quick-drying properties, providing a comfortable wearing experience. Chlorine-resistant, suitable for pool use. Undergarments: Offers a snug fit, providing moderate compression and support. Lightweight and breathable, suitable for everyday wear. Casual Wear: Ideal for casual pants, leggings, and tight-fitting pants, suitable for everyday leisure and mixing with sportswear.
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
