UNIVERSAL TILTING ROTARY FURNACE (UTRF) for Lead recycling
the above mentioned photograph under production capacity 10 ton/batch.
Universal Tilting Rotary Furnace is designed like a rotary closed well furnace. It has advantages of rotary furnace, rebvetory furnace and dry hearth furnace in a single equipment.
Main advantage of UTRF is that it can be rotated as well as tilted. Firstly lead scrap is loaded in furnace with smelting flux and furnace locked. The material is heated with the help of oil/gas burner which is mounted on the door, until it reaches melting point. Heating is immensely faster because of horse shoe flame design. Due to the quick heating, consumption of oil and melt loss is very less as compared to the conventional tube furnace.
Merits of Universal Tilting Rotary Furnace:
1. Less amount of flux is required for melting.
2. Efficient working condition.
3. All non-ferrous scrap can be recycled in a single unit.
4. Homogenous charge resulting in high quality of material.
5. Self-cleaning of lining.
6. Recurring cost is approximately 30% less as compared to horizontal rotary furnace.
7. Ensures faster melting rate.
8. Better yield.
Comparison between UTRF and Horizontal fixed axis Rotary Furnace:
The traditional furnace (fixed axis rotary furnace) is primarily a rotating tube with burner on one end and flue at the other. The furnace functions under negative pressure and gets cold air from outside making it virtually impossible to control the atmosphere in the furnace, which is nearly always oxidizing (air rich). It view of it, large amount of flux is required to protect the charge. Consumption of oil is also high because travel length of flue gas is less.
On the other hand, UTRF furnace is designed with a single entrance and exist point. The door carries burner and flue. The furnace operates under positive pressure and during firing of the burner there is complete absence of cold air from outside resulting in reduced amount of flux required during operation. In addition the furnace operates at an angle, the charge is mixed with similar action that of a concrete mixing machine. This improves homogeneity heat transfer resulting in high thermal efficiency.
Salient Features of Universal Tilting Rotary Furnace:
1. Tap to tap cycle time 4- 5 Hrs.
2. Energy consumption 600 Kw/MT
3. Robust steel structure with proven drum
4. Life of refractory lining is long
5. Oversize driving system and bearings.
6. Tilting, door opening and closing is hydraulically operated.
7. Sturdy interlocks for safety of the equipment.
8. Less manpower required. Only two persons per shift can operate the furnace.
Supplier: Shaft (shear) shredder, eddy current separator, universal tilting rotary furnace, ingot casting machine, robotic ingot palletizer, dryer, silo discharger
About Rotary Furnace The Rotary Melting Furnace is a very flexible and universal equipment used for recycling many non-ferrous metals. It is the major lead production technology used in India and many other countries for Secondary Lead Production. A lead production system based on this technology has certain distinct characteristics such as: •Equipment scalable for installing higher capacities •Recovers all lead in one production cycle •Plates & powder from scrap battery as well as slag from Mini Blast Furnace can be used as raw material •Requires addition of certain consumables •Can be fired with various fuels •Generates high Pollution both as Flue Gases & Fugitive Emissions Description of Rotary Furnace It is a Rotary kiln in the form of a metallic cylinder with conical sides on both ends. Mild steel plate is used for construction of this shell and its thickness varies depending upon the capacity of the equipment. This shell is rotated on its own axis at 1-2 rpm. For this purposes tyres (also called riding rings) are fitted on the shell. These are fabricated from MS squares or flats, machined for a smooth finish. These tyres ride on steel rollers which are again machined finely. These rollers are fitted on a robust MS structural frame and driven by a gear & motor arrangement. The shell is lined inside with insulation and fire bricks of suitable Alumina content. Conical ends of the furnace are open on both sides. The furnace is charged with Raw material along with additives from the front end. This side is provided with a movable door on which a burner is mounted. The burner can be a conventional one or a fully automatic one depending upon the fuel used. At the other end, an exhaust block lined with refractory bricks is provided. A tapping hole is provided in the center of the shell from where molten metal & slag are discharged. Flue gases generated are sucked from the exhaust block side of the furnace. A typical 3.0 TpB Rotary Furnace has the following standard sizes & specifications : •Outside dimensions of the Rotary •Shell dia : 2075mm •Shell length : 2500mm •Total length : 4500mm •Charging dia : 450mm •Exhaust side dia : 450mm •Refractory thickness : 200mm •Fuel : Furnace Oil •Burner : Model 4 A Make: Wesman with complete assembly •FD Fan capacity : 550 cmh at 44mm of WG •Gear Box in drive : 8”, 1:40 Ratio •Motor in drive : 15.0 HP x 960 RPM •Structure used for base : ISMC 250 x 80 Advantages •Recovers 100% lead in the first operation. •Slag produced is lead free. •Equipment can be scaled up for higher production capacities. Disadvantages •Many chemicals are required for operation. •High power consumption. •Difficult to produce low Antimony lead suitable for soft lead purposes. •Fugitive Emissions need to be captured in addition to flue gases. •Need skilled operators and careful maintenance.
Supplier: Aluminum recycling furnaces, rotary furnaces, skelenor furnaces, cruicble furnaces, ingot casting machines, pollution plants, heavy machinery, heat treatment furnaces, electrical furnaces.
Supplier: Blast furnace, sintering machine, lime kiln, coking kiln, power plant, rotary kiln, rock wool production line
Buyer: Blast furnace, sintering machine, lime kiln, coking kiln, power plant, rotary kiln, rock wool production line
Supplier: Heat treat furnaces, ladle preheaters, rapid quench furnaces, ageing ovens, mould ovens, pwht furnaces, stress relieving furnaces, aluminium decoating furnaces, defoaming furnaces, high velocity burners , bio medical waste incinerator , pit type furnaces ,rotary retort hard tempering furnaces ,auto pourer heaters ,tank agitators ,submersible agitators , bio medical waste incinerators ,quenching manipulators ,industrial burners
Services: Installation commissioning, simulation,thermal calibrations
Supplier: Rebuilt blanchard verticval spindle rotary surface grinder, springfield, campbell universal vertical spindle grinder including CNC
Services: Machine tool rebuild, machine tool repair, machine tool install and set up, complete plant
Buyer: Blanchard, springfield and campbell grinders
Supplier: Cnc rotary table, cnc tilting rotary table, direct drive rotary table, cnc hydraulic gear index table, cnc hydraulic coupling gear index table, indexing head, auto pallet changer, swing table, swing base spindle head
Supplier: Machinery & equipment for metal extraction and recycling industry including rotary furnace, pollution control equipments, refining and alloying solution
Services: Design a new plant and upgradation of existing battery recycling plant
Supplier: Copper Metallurgy, Lead Metallurgy, Recovering Metal From Waste Materials, Cathode Plate, Anode Plate, Chemical Reagent, Lead Refining Rotary Furnace, Lead Refining Kettles, Lead Pumps.