Main Feature:
1. Fashion front panel is made of brushed aluminums alloy;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection;
4. Powerful output capacity to achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
Main Feature: 1. Fashion front panel is made of brushed aluminums alloy; 2. Sturdy steel case can shield the electromagnetic interference from outside; 3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection; 4. Powerful output capacity to achieve driving bass, mellow alto and clear treble; 5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption; 6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed; 7. High quality connectors guarantee perfectly signal transmission by firming conjunction; 8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc. Technical Specifications: 8O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*800W 4O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*1200W 8Obridge mono (1kHz(EIA)with 0.5%THD):2400W Voltage Gain: 5dB Total Harmonic Distortion(THD):< 0.5%,20Hz-20kHz Intermodulation Distortion(IMD):?0.35% Slew Rate:>10V/us Frequency Response (at 1 Watt): 20Hz-20kHz,+0/-1dB Damping Factor (8 O), 10Hz-400Hz >200 Signal-to-Noise Ratio (below rated power,20Hz -20kHz, A-weighted ): >100dB Crosstalk (below rated power) At 1 kHz At 20 kHz:-75dB -59dB Input Sensitivity for full rated power at 8O: 0.775V or 1.4V Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO Input Connectors: Once balanced XLR per channel Output Connectors(Speaker Connectors): 4-POLE Speakon per channel Front Panel Controls: Power on/off switch, one gain control per channel Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V Power Indicator Signal Indicator: One red LED of work, One green LED per channel Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Main Feature 1. Fashion front panel is made of aluminums alloy with metal wiredrawing craft surface treatment; 2. Sturdy steel case can shield the electromagnetic interference from outside; 3. Strong multi-protection mechanism including radiating protection, short, circuit protection, switch delay protection; 4. 4 channels output and 800W rated power of per channel can achieve driving bass, mellow alto and clear treble; 5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption; 6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed; 7. High quality connectors guarantee perfectly signal transmission by firming conjunction; 8. It's suitable for large stage performances, pubs, KTV rooms and conference halls etc. Technical Specifications 8O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*800W 4O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*1100W Frequency Response ref 1k: THD+N:20Hz-20kHz,+0/-1dB < 0.5%,20Hz-20kHz Voltage Gain: 38.3dB Intermodulation Distortion(IMD): ?0.35% Slew Rate: >10V/us Damping Factor (8 O), 10Hz-400Hz >200 Signal-to-Noise Ratio (20Hz -20kHz): >100dB Crosstalk (1 kHz, 20 kHz): -75dB -59dB Input Sensitivity for full rated power at 8O: 0.775V or 1.4V Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO Input Connectors: Once balanced XLR per channel Output Connectors(Speaker Connectors): 4-POLE Speakon per channel Front Panel Controls: Power on/off switch, one gain control per channel Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V Power Indicator Signal Indicator: One red LED of work, One green LED per channel Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads Ventilation: Flow-through ventilation form front to back Cooling: speed regulated ,thermal protection
Main Feature 1. Fashion front panel is made of brushed aluminums alloy; 2. Sturdy steel case can shield the electromagnetic interference from outside; 3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection; 4. Powerful output capacity to achieve driving bass, mellow alto and clear treble; 5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption; 6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed; 7. High quality connectors guarantee perfectly signal transmission by firming conjunction; 8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
PAC60Cip is the portable six phase real time simulation amplifier.This current amplifier is similar to PAC60Ci but it has lower output power and less weight. PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage. PA30Bip-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bip but it has higher voltage output and power output. PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight. PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight.
Pav series four-quadrant simulation power amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions. It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc. It is also the ideal r&d device of wind power, pv, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc. It can directly connect to the popular simulation platform.
PAC2000 amplifier is high quality linear power amplifier specially designed for power system simulation.It realized the high accuracy of the high power and high current successfully.It meets all kinds of capacitive load and inductive load. Features 1 Channels current outputs. The output current of each channel can reach 200A RMS. The maximum output power can reach 2400VA. PAC60Ci is the six-phase real time simulation amplifier. This current amplifier is possessed of high accuracy and fast liner response. PA60Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher current output and power output. PA30Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher voltage output and power output. PA30Bi-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bi but it has higher voltage output and power output. PAC60Ti is the six-phase real time simulation amplifier with high accuracy and fast liner response. This current amplifier can generate high power. For static status, the maximum output power can reach 600VA; for transient status, the maximum output power can be 800VA. PAV250Bi is six-phase real time simulation amplifier. Each phase of this voltage amplifier can output 250V RMS. PAV120Bi is a six-phase real time simulation amplifier.Each phase of this voltage amplifier can output 120V RMS.
1.Product descriptions Type : anodizing distribution enclosure Material : aluminum alloy 6063 + aluminum alloy 5052 Size : 230*75*246 mm (wxhxl ) Finish treatment : brush, anodized server Stock color : black, sliver, gray, gold etc. Price : we have our own factory so that we can offer the more competitive price Quality : top slate raw material, skilled workers to provide good quality products. Moq : if there are goods in stock, and no housing openings, the moq can be one. Package : pearl cotton, foam corner, cartons Delivery terms : ups/dhl/china air post/hk air post Delivery time : 12-15days for bulk order , 7-10 days for sample , 1 day for stock. Payment terms : l/c, t/t, paypal Supply ability : 100000 pieces/month Port : guangzhou, shenzhen, foshan 3.Oem service 1.Cut holes 2.Print logo 3.Design new style 4. Company information Foshan nanhai yonggu hardware products factory was established in 2004, located in nanhai district, foshan city, guangdong province. Our company covers over 1, 500 square meters. There are many cnc machining centers, cnc milling, punching, drilling & grinding machines, sandblasting machines and other advanced processing equipment. We are specialized in the production of aluminum chassis, aluminum switch panel, diy chassis amplifier panel, shielded box, as well as a variety of specification knobs and machine feet and so on. Surface drawing, sandblasting, oxidation, screen printing and surface treatment can be customized. Our products are widely usedin instrument, electric power, telecommunication, radio and television, medical device, network, hotel and military supply.
Frequency range:25-30 mhz. Operate voltage:12-14 vcc. Input current:14-20 a. Input power:1-5 w. Input power ssb:2-10 w. Fm output power:max 100 w. Am output power:max 200 w. Output power ssb:max 300 w. Working mode:fm- am-cw-ssb. Fuse.:2x12 a. Dimension:109x225x35. Mm:weight:750 g. Gift boxes. Dimension:109x225x35 mm. Weight:750 g.
Best application assistant for real-time digital simulation system With around 13 various power amplifier models and countless customized solution models, ponovos power amplifier could be able to suit for different real-time simulation sysmtem application requirements.
