Rebar Location System

Send InquiryCHAT NOW
Product Details
Product description

This cable fault tester is a comprehensive set of cable fault detection equipment. It can be used to detect flash-over cable fault, the earthing of the resistance, short circuit , cable break, and poor contact, with acoustic instrument, the exact location of the fault can be accurately detected. This tester is particularly suitable for testing voltage power cables and communication cables in various models and different levels



Applications and Uses

This tester can test various types of power cables (voltage 1KV ~ 35KV) and telephone cable, FM communication cables, coaxial cables, and the short circuit on the metal overhead cables, grounding, high resistance leakage, high impedance fault flash-over ,cables disconnection, and poor contact fault; and it can also test the length of the cable and the waveform transmission velocity.

70MM ABS geotechnical inclinometer casing features
The inclinometer casing is used in conjunction with all available inclinometer probes to measure ground movement.
The ABS inclinometer casing is used in conjunction with all available inclinometer probes to monitor the stability of slope areas, excavation walls and so on. Casing tubes are manufactured from high quality ABS material to exacting quality control standards. The length of each casing is 2-4meters.

70MM ABS geotechnical inclinometer casing specifications

Out Diameter f70mm
In Diameter f60mm
Guide slot width 4-5mm
Guide slot depth 2mm
Length 2-4m
Thickness deviation =14%
Torsional angle of guide slot =0.2 °/m

Hebei yida anti impact rebar coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the high speed tensile test of anti instant impact by germany berlin bam laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars.
Special advantages:
(1)each rebar is connected by cold swaged with a coupling, it was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage.
(2)rebar sleeve bond press is done prior to site connection saving precious site time.
(3)the two sleeves are connected through a high-strength bolt, quality ensured.
(4)installation on site is easy and fast, even in dense cages. No x-ray check is needed and installation can be done in any weather conditions.
(5)no thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice.
(6)the yida acj rebar coupling system stands complex or full tension as well as full compression state.
Application guide:
Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions.
Site installation method
Step 1:screw the bolt into female coupler swaged with rebar, till unable to screw continually.
Step 2:screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually.
Step 3:with help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.

-

Application Guide:
Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions.

Site installation method
Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually.
Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually.
Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.

Split-lock coupler is a mechanical reinforcement connection system. The system is divided into two parts: split-lock coupler and YD-JYJ-40 split-lock clamping machine. It is suitable for the modular connection of rebars, and the construction is simple and convenient, and can be applied to the scene where the upper and lower steel bars are against each other or there is a gap. The joint is still connected by mechanical thread, so the demand for extrusion force is small. Compared with other products, the taper sleeve locking system has greater tolerance for the position of horizontal reinforcement.

1. Follow the specifications:
ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles
JGJ106-2003 (China) Technical code for testing of building foundation piles


2. Parameters::
1). Size: 62 * 172 * 225 mm.
2). Weight: 2.0 kg.
3). High-contrast touch screen display.
4). Temperature range:
Operating Range: 0° to 40° C; Storage Range: -20° to 65° C.
5). Powered by internal battery (6 hours duration).

3. Functional:
1). The LPT-E is used for Integrity pile testing and judging defect position
2). Automatic data storage
3). Signal amplification capability
4). Data can be averaged over a variable number of blows.
5). Variable signal amplification over time
6). 24-bit A/D converter
7). Sample size: 4k
8). Sample Frequency: 48kHz, 96 kHz,144 kHz

1. Follow the specifications:
ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
JGJ106-2003 (China) Technical code for testing of building foundation piles

2. Physical
(1) Size: 62 *172 * 225 mm
(2) Weight: 1.7 kg
(3) 8 inch and high brightness color LCD touch screen
(4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C
(5) The cables and connectors are suitable for PDA

3. Technical
(1) HPT used for determining the pile bearing capacity and pile integrity.
(2) It can be used for pile driving monitoring and the cast-in-place pile test.
(3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz.
(4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms
(5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state.
(6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow.
(7) Test data exported through the external u-disk
(8) During test every blow can be saved automatically
(9) Storage capacity of more than ten thousands blows.
(10) HPT can be used for pile driving monitoring and the cast-in-place pile
(11) HPT data can save as *.X01(used for PDA-W)
(12) The main cable and connecting cable are compatible with the PDA.
(13) Built-in lithium battery can be used more than 5 hours continuously.
(14) PDAR program carry on CASE method analysis.
(15) RCAPWAP program carry on match analysis automatically or manually.

1. Follow the specifications:
ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles
JGJ106-2003 (China) Technical code for testing of building foundation piles


2. Parameters::
1). Size: 62 * 172 * 225 mm.
2). Weight: 2.0 kg.
3). High-contrast touch screen display.
4). Temperature range:
Operating Range: 0° to 40° C; Storage Range: -20° to 65° C.
5). Powered by internal battery (6 hours duration).

3. Functional:
1). The LPT-E is used for Integrity pile testing and judging defect position
2). Automatic data storage
3). Signal amplification capability
4). Data can be averaged over a variable number of blows.
5). Variable signal amplification over time
6). 24-bit A/D converter
7). Sample size: 4k
8). Sample Frequency: 48kHz, 96 kHz,144 kHz