We are manufacture of garnet sand,steel grit and steel shot,and we have more than 10 years experience of production and sale,so if you have the demand of garnet 80 mesh for water jet cutting ,or garnet sand,steel grit and steel shot for blasting,
Bearing Steel Grit is processed to the high quality,with strict quality control at every stage of processing,packaging and transportation.Compared with traditional steel grit made by crushing steel shot, bearing steel grit is crushed directly from cut-off bearing steel into grit. It has the better resistance due to it has higher metallic cr composition than normal casting steel grit.
Steel grit ZW Steel grits has been divided into three groups of different hardness according to their intended purpose.The hardest material GH, is designed for use exclusively in air blasting equipment. The two softer materials, GL and GP, may also be used in centrifugal wheel blast equipment. Steel Grit Hardness Selection: GP steel grit : The GP steel grit external form is round and shape, even GP steel grits are softer than GL and GH,but owns fine elasticity and the strength of fatigue resistance as a result of fine heat treatment, so GP steel grit applied in all aspects . GL steel grit : The GL steel grit is harder than GP steel grit, but during blasting ,GL steel grit also loses its sharp edges, GL steel grit is particularly suited to descaling, operations before coating and surface preparation applications. GH steel grit : The GH steel grit has maximum hardness, it will not lost their angular during operating. These abrasives are particularly effective in surface treatment processes and produce a uniform surface, GH steel grit used for surface cleaning of high hardness products and surface roughening operations effectively .
Bearing Steel Grit is processed to the high quality,with strict quality control at every stage of processing,packaging and transportation.Compared with traditional steel grit made by crushing steel shot, bearing steel grit is crushed directly from cut-off bearing steel into grit. It has the better resistance due to it has higher metallic cr composition than normal casting steel grit.
Blasting abrasive material steel grit 1, factory price with good quality. 2, G10-G120 3, 0.2mm-2.5mm 1. Production specification: g10, g12, g14, g16, g18, g25, g40, g50, g80, g120 2. Chemical composition of cast steel grit: c 0.70-1.20%, mn 0.60-1.20%, si0.40-1.20%, s0.05%, p 0.05% 3. Gp: 42-50hrc (399-509hv). Gl: 56-60hrc (620-713hv). Gh: 63-66hrc (795-889hv). 4. Microstructure: tempered marten site high strength, durable, ervin life: cast steel grit: 2500 cycles.
1. Production specification: g10£¬g12, g14, g16, g18, g25, g40, g50, g80, g120 2. Chemical composition of the products: c 0.70-1.20%, mn 0.60-1.20%, si0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Gp: 42-50hrc (399-509hv) Gl: 56-60hrc (620-713hv) Gh: 63-66hrc (795-889hv) 4. Microstructure: tempered marten site high strength, durable, ervin life: cast steel grit: 2500 cycles Pallet with 40 bags of 25 kgs
1. Production specification: g10£¬g12, g14, g16, g18, g25, g40, g50, g80, g120 2. Chemical composition of the products: c 0.70-1.20%, mn 0.60-1.20%, si0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Gp: 42-50hrc (399-509hv) Gl: 56-60hrc (620-713hv) Gh: 63-66hrc (795-889hv) 4. Microstructure: tempered marten site high strength, durable, ervin life: cast steel grit: 2500 cycles Pallet with 40 bags of 25 kgs
STEEL GRIT CAPABILITY INTRODUCTION: Raw material is non casting bearing steel, it is crushed after quenching, then it is tempered. Product features with wear resistance and high impact toughness. According to different application, steel grit is devided into below 3 types: Type A: Hardness>60HRC This type is specially developed for granite cutting with stable performance, uniform grain size and high wear resistant. It has been approved by our customers that angular steel grit are sharper, faster cutting speed than arc steel grit and sawing surface finished is flatter and smoother. Type B: Hardness>53-60HRC It is angular shape in the originals and is gradually ground round, especially applicable to removing the oxygenated surface, cleaning of metal parts and shot peening Type C: Hardness> 40-50HRC The hardness is lower than type B, In the process of the abrasives blasting. Its edges are removed slowly, especially applicable to removing the oxygenated surface, cleaning of metal parts and pre-treatment. 25kgs/bag.
We strictly according to GB "GB/T18838.3-2008 high carbon steel shot and sand", American steel casting association "SFSA20-66 cast steel abrasive standard", American motorcar engineer association "SAE standards," J827 cast steel shot in Chinese Black people republic of metallurgical industry "YB/T5149-93 cast steel shot", the U.S. army standard "MIL - S - 851 cleaning and strengthen with metal kind steel grit and steel shot standards" and "international organization for standardization ISO11124-3 standard high carbon steel shot cast. Steel grit plastic woven sack packaging, packaging bags which steel grit, steel grit wood pallet packaging, paper bag steel grit packaging, bucket type steel bolus packaging.
Made of bearing steel material with special technology, the bearing angular steel grit has fine and homogeneous microstructure. With advantages of higher efficiency, longer life-cycle and less consumption than normal steel grit, it will obviously reduce the comprehensive cost. Such an excellent steel grit is recommended for blast cleaning and surface preparation. G10, G12, G14, G16, G18, G25, G40, G50, G80, G120.
