Biological Anaerobic Wastewater Treatment

"Bioclean" is acustomized natural microbial / enzymatic product with specific strains that help to work treatment plant with less power consumption. "Bioclean" is the unique biological formulation and a 100% green technology for best biomass reinforcement in aeration tank. "Bioclean" is a consortium of vigorous and specific microbes that are good at degrading organic pollutants and can effectively help to maintain the outlet parameters of effluent within limits. Uniqueness : Most economical and eco-safe solution for treating industrial effluents. All our products are formulated at our in-house DSIR approved R & D laboratory and Haffkine certified manufacturing unit. Benefits : -Reinforce active biomass for optimum performance of treatment plant -Maximum reduction of refractory COD and BOD in the effluent -Effectively reduces the ammonical nitrogen, color and odor during biological treatment -Maintains optimum sludge and proper MLSS development, ie. increases healthy / active biomass content in aeration tank -Helps to enhance better food : microorganisms ratio -Contributes majorly for very less power consumption -Reduce biomass / Sludge generation -Superior product that can easily handle toxic / shock load in treatment plant -Ideal product to improve ETP efficiency -Improved nitrification and denitrification process

Supplier: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate
Buyer: Organic chemical, inorganic chemical, wastewater treatment, solvents, gases, industrial chemicals, ferric chloride, hydrochloric acid, aluminium sulphate, ferrous sulphate, trisodium phosphate

Ion exchange resins and adsorbent medias are often ideally suited for removal of specific contaminants and/or for polishing the effluent from other wastewater treatment processes. Suzhou X Chemical provides a large number of products for wastewater treatment including chelating resins, resins suitable for organic scavenging and resins for selected removal of specific contaminants, such as boron,XResinâ??s ion exchange resins are available in many container sizes, mesh sizes, and can be specially prepared to be pH buffered or in a specific ionic form, ready to use. Many of these products are also available with the WQA Gold Seal certification to the ANSI/NSF 61 standard for potable water

Ozone catalyst technology is an advanced oxidation process based on ozone. It combines the strong oxidizing properties of ozone with the adsorption and catalytic properties of the catalyst, and be proved more effectively solving the problem of low ozone treatment efficiency, low ozone utilization, high operating costs, and incomplete degradation of organics questions. The phase state of the ozone catalytic oxidation catalyst is divided into homogeneous catalytic ozonation and heterogeneous catalytic ozonation. In the homogeneous catalytic ozonation technology, the catalyst is uniformly distributed and has high catalytic activity, the mechanism of action is clear, and it is easy to study and grasp. However, its shortcomings are also obvious. The catalyst is miscible in water, causing it to be easily lost, difficult to recycle, and cause secondary pollution. The operating cost is high and the water treatment cost is increased. The heterogeneous catalytic ozonation method uses a solid catalyst to accelerate the oxidation reaction in the liquid phase (or gas phase) under normal pressure. The catalyst exists in a solid state, is insoluble in water, does not run off, has no secondary pollution, and reduces the operating cost of catalytic oxidation. The ozone catalytic oxidation method of wastewater is a large-scale advanced oxidation technology, which is mainly realized through two ways of direct oxidation and catalytic oxidation. Ozone can directly mineralize the large molecules, long chains, and difficult-to-biodegradable organic matter remaining in the wastewater into carbon dioxide and water, and partially decompose into small molecules and easily biodegradable substances, destroy the structure of non-biodegradable organic matter, reduce toxicity, and increase B/ C ratio, so as to ensure the treatment effect of subsequent biochemical methods. The traditional ozone oxidation technology is mainly direct oxidation, which has poor mass transfer effect, low ozone utilization rate, and high investment and operating costs.

Palladium is an indispensable key material in high-tech fields such as aerospace, aviation, navigation, weapons and nuclear energy, as well as in the automotive industry. It is also an investment that cannot be ignored in the international precious metals investment market. Palladium-containing wastewater is often contained in electroplating wastewater. If it is not recycled, it will pollute the environment and waste resources. Therefore, it is very necessary to recover palladium.

The acid-base wastewater treatment resin produced with Bestion brand resin have strong exchange capacity, long service life, repeated use, stable physical and chemical properties, high reaction efficiency, practicality, and low cost. It is often used in various acid-base wastewater. The treatment process has been widely used in the treatment of acid and alkali wastewater, and has been well received by customers at home and abroad.