Tamura, Nec, Leao, Dye, Rh Thermal Fuse

Structural Classification Of Thermal Fuse
organic type metal shell temperature fuse is a combination, the composition of the structure are:
1. Pin (A), 2. Sealed resin, 3. Insulating ceramic, 4. Fine spring, 5. Star reed, 6. Coarse spring, 7. wafer, 8. temperature sensing block, 9. The housing, 10 Pin (B).

When the temperature insurance is in normal operation, the current flows from the left lead to the sliding contact and flows through the metal housing to the right lead. When the external temperature reaches the predetermined temperature, organic matter can melt melt, the compression spring will become loose. That is, spring expansion, sliding contact (slidingcontact) and the left side of the separation. The circuit will cut off, the current between the sliding contact and the left lead is cut off. the temperature fuse will fail and can not be used again.

2, easy to melt alloy wire thermal fuse has ceramic shell and square shell, its temperature sensing element is a fusible gold.
Product structure: is the axis of the symmetrical lead, fusible alloy wire, and resin mixture and insulated porcelain tube, plastic shell.

When the temperature rise of the heating element is set to a temperature, the resin mixture begins to liquefy, when the melting point is reached, with the help of the resin mixture (increasing the surface tension of the melted alloy), has been molten alloy wire in the resin mixture under the action of tension, quickly to both ends of the wire as the center shrink into a spherical, and thus permanently cut off the circuit.

Technical Parameters And terminology Of Thermal Fuses
(1) Rated operating temperature (Tf):
The temperature fuse is tested according to the standard method to change the temperature of its conductive state. According to IEC6091 standards-based security provisions, the temperature fuse must be operated within the rated operating temperature + 0 / -10 C (the Japan Electrical Supplies Act provides a tolerance range of ± 7 C).
(2) Operating temperature Found:
The temperature fuse is heated in the silicone oil tank at a rate of 0.5-1 C per minute, detection current is less than the fusing temperature measured at 10mA condition. It is the actual operating temperature of the temperature fuse.
(3) Holding temperature (Th):
When the temperature fuse passes the rated current, can hold for 168 hours without changing the maximum temperature of its conductive state.
(4) limit temperature (Tm):
Temperature fuse can withstand the maximum temperature for 10 minutes reconnection phenomenon never occurs.
(5) Rated current (Ir):
The maximum current that the temperature fuse can carry.
(6) Rated voltage (Ur):
Temperature fuse maximum operating voltage.

Type Universal USB charger socket
Charging Port 2 Ports
Connection Universal USB charger socket
Warranty 1 Year
Combination Charger Socket Outlet
Voltage 12-24v
Model Number DS2014
Design Style New China-Chic
Product name 4.2A Car Cigarette Lighter Socket Splitter Dual USB Charger
Material ABS
Input Voltage 12V-24V
USB output 4.2A
Size 3.7*5.4*2.9cm/1.5*2.12*1.14inch
LED Blue LED
Waterproof grade IP65
Working temperature Min.-20 Celsius Degree, Max. 80 Celsius Degree

Peak current: 60ka (8/20us)
Rated voltage :300v
TF temperature : 115
Available temperature : 102/115/130/150.

Peak current: 60ka (8/20us)
Rated voltage : 250v
TF temperature : 115
Available temperature : 102/115/130/150.


Size and packing could be as per customers' requirement.

1. Low Resistance
2. High Surge Withstanding Capability(8/20us)
3. Low Profile Designs for Various Application
4. High Solderablity
5. Lead Freeú¼Halogen Free & RoHS Compliance
6. Agency Approvals: UL60691.

AMP Fuse

Thermal fuse manufacturing
The thermal fuse is a non-resettable, one-time overheat protection element, and the current fuse is a one-time overcurrent protection element. Series connection in a variety of electrical power input, when the use of household appliances in the abnormal temperature changes, or temperature out of control lead to excessive temperature rise, the thermal fuse can quickly cut off the circuit to avoid the occurrence of fire.
Commonly used in: hair dryer, iron, rice cookers, electric stoves, transformers, motors, drinking fountains, coffee pots and so on.
We not only related to the product structure and technology, more in-depth to the core of the product - Fuse materials development and application, such as fusible alloy wire, lead antimony alloy wire, organic mixture and so on. To provide you with one-stop from the rapid proofing to small batch production services. Please contact our professional team, let us come for you to achieve all the technical requirements.

What Is A Thermal Fuse?
Thermal fuse, is overheat protection components, also known as temperature fuse or Thermal Cutoff (GB GB1616.1-2013), widely used in electrical overheating protection.
The temperature sensing portion can be divided into:Fusible alloy wire and organic particle type temperature fuse, after fusing once cut off the current, non-recovery type thermal fuse.


Features Of Thermal Fuses
In Yaxun can provide a full range of thermal fuses, from your first consultation message to the final product delivery, you can get our engineers and sales staff professional, personalized service.
(1) high precision operating temperature, fusing action is reliable, not premature or delayed blown;
(2) good thermal stability, long-term in a high temperature state will not get out of control;
(3) load current up to 20A, it can be adapted to use a large current household appliances;
(4) the shell is not charged, the use of safe, easy to install;
(5) low prices, to adapt to mass production.
(6) temperature response speed;
(7) small size, easy to install.
(8) Structural accurate, resistance to vibration, impact resistance, applicable to household appliances, industrial circuit overheating protection;

Indonesia Thermal Power Fuse XRNP-7.2/2-50-1
Deyang YOYIK is a strong technical force, first-class product quality, brand reputable large-scale mechanical and electrical equipment Limited. Company products covered a wide range of products sold worldwide, a number of users trust. Acting foreign first-class brand, EATON VICKERS, star, and so on products. Guarantee genuine, the spot sale.

YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-Fuse XRNP-7.2/2-50-1-DF
lubrication pump 2CY-8/3.3
thermocouple k-type temperature sensor WRNK2-292
electric hydraulic oil power pump 16G2AT-HMP(DN25)-DK025-1600
dc screw pump HSNH440-46NZ
thermistor TE-403
thermocouple pt100 WRNK2-331\�?6\K
centrifugal pump vertical DFB125-80-260
rotary vacuum pump P-1758
carbon brush "D374N T12 x W20 x H32
accumulator bladder 160 litre, neoprene and EPDM, 4 Mpa
Valve Solenoid
Thermocouple Control TE-211
thermocouple thermometer WRNK-221
transfer pump fuel 100ZW-100-30
EH oil supply device
wet solenoid directional valve 4WE6F6X/EW220-50NZ5L
thermocouple k-type temperature sensor WRNK2-291 �?5
platinum rhodium thermocouple wire TE-108
rotary piston pump PV29-2R5D-COO
oil pump price 70LY-34*3
motor universal coupling PVM098ER09GS02AAA28000000A0A
thermocouple wire type k WRNK2-231
thermowell flange WREK2-191
TC Sensor TC03A2-KY-2B/S12
servo valve 761K4122B
dc vane pump F320V12A1C22R
thermocouple range WREX2-001
mechanical seal rings 11-SHF11/135-E10-A3 00 11
thermocouple sensor WRNK-231TZ M20*1.5
Thermocouple Assemblies WREK2-191
screw pump diagram HSNH210-46A
thermocouple machine TE-104
Fuse XRNP-7.2/2-50-1
rtd thermocouple WH-5A421.575
STEAM SEAL RING HP
Platinum-Iridium Wire WRNK-231TZ M20*1.5
AST solenoid valve DF2051-1MPa
transfer pump oil DLZB820-R67
thermocouple k type TE-404
rotary vacuum pump P-1609-1
hydraulic screw pump DLZB820-R65-8
Duplex oil filter DQ150AW25H1.0S
lubrication system pump 2CY-24/0.35
stainless steel Thermocouple WRN2-239
vacuum hand pump M02225.0BMCC1D1.5A
replace thermocouple TC03A2-KY-2B/S20
piston pump parts A3H37-F-R-01KK-10
PIN TGA00057-9
Platinum Thermocouple Wire WRN-332NM
globe valve HY-SHV25.01Z
thermocouple voltage TE-107
thermocouple k-type temperature sensor TE-403
Bladder SB330H
piston pump hydraulic PVH98Q1C-RSF-1S-10-C25-31
LVDT 0-200MM TSI HL-6-200-15
Spherical Roller Bearing 24176CA/W33(DY-M25818)
rtd thermocouple WRN2-239 0-600â??
electric oil transfer pump YW80-65-160X2.5
pressure hose SMS-12/15-1219-C
manual vacuum pump PVH098R01AAD30A250000002001AB010A
thermocouple type WRNK2-221
fan D2E160
centrifugal pump YCZ50-250C
hydraulic electric pump 50YW25-33
thermocouple type k WREX-001
Fuse XRNP-7.2/2-50-1

DFYL-2022-3-2-ZYR