Polytetraflouroethylene(PTFE) / Teflon gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF).
PTFE/Teflon sheets, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.2Mtr(Width) x 10.0Mtr(Length)
1.0Mtr(Length) x 1.0Mtr(Width) x 50cm(Height)
Gross weight @ 200kgs
Re-structure PTFE sheet Item unit direction Compressibility % 20 Recovery % 40 Tensile strength mpa 14.0 Creep deformation laxation % 37 Sealing capability ml/h 0.1 Temperature 260 Pressure bar 65 105 Ph 0-14 Density g / CM 3 1.8~2.3 2000x100x0.1cm/volume
PTFE gaskets is made from pure PTFE sheet, PTFE being most resistant to chemicals does not react easily. It has the lowest coefficient of friction. RL-5330 is manufactured from qualitative range of raw materials, thus exhibiting quality features such as high efficiency and durability.
PTFE gasket is made from pure PTFE sheet, PTFE being most resistant to chemicals does not react easily. It has the lowest coefficient of friction. PTFE gasket is manufactured from qualitative range of raw materials, thus exhibiting quality features such as high efficiency and durability.
PTFE rubber gasket is using EPDM rubber or NBR rubber as the main body,compounding with a special activation of pure PTFE shell in the effective part of the sealing.Its biggest advantage is the using of special bonding process fully bonded PTFE and synthetic rubber,and PTFE rubber gasket has excellent overall composite.
PTFE envelop gasket is a non-metallic gaskets,general consists of two parts of the coating and inserts.The coating mainly plays the role of corrosion,usually made of PTFE.The inserts (filler) is good elasticity with or without metal reinforcement layer of non-metallic sealing materials,usually made of asbestos rubber sheet.
Gaskets Press Machine Features:Efficiently producing: 300pieces/h(large size);More energy saving: the total power only 5KW;More friendly to environment: no PTFE powder splashing but powder output automatically;More precise: producing gaskets by controlling the power quantity;More time saving : the power cut off automatically while the production number set up;Longer working life : no heat while working. Gaskets Press Machine Features: Efficiently producing: 300pieces/h(large size) More energy saving: the total power only 5KW More friendly to environment: no PTFE powder splashing but powder output automatically Intelligent control : producing gaskets by controlling the power quantity More time saving : the power cut off automatically while the production number set up Longer working life : no heat while working. high quality components used. Industrial Applications For Teflon® Gaskets PTFE gaskets are used in many industrial applications, especially the following: · Compressor High temperature and surface-wear resistant sealing gaskets. · Electric Motor Sealing gaskets for components that require corrosion-resistance, exposure to high and low temperatures and high surface wear. · Medical Component Seals for electronic instrumentation using materials that provide secure seals and long product life. Specialty gaskets, especially miniature sizes, are required for many medical devices. · Petrochemical Gaskets for process equipment that are resistant to corrosive fluids, temperature extremes and surface wear.
PTFE GASKET IDEAL GASKET SOLUTION FOR HIGHER BOLT LOADS EQUIPMENT. PTFE Gasket is made of synthetic fluoropolymer of tetrafluoroethylene. It has highly resistant to chemicals, solvents, caustics and acids, except for alkali metals and fluorine gas. In addition, PTFE also has a very low surface energy and conforms to FDA regulations. PTFE gasket provides excellent sealing performance in corrosive environments. It can be used as flange gasket in the chemical industry, machine and equipment industry and piping. COMMON SPECIFICATIONS Item Thickness (mm) Inner Diameter (mm) Outer Diameter (mm) PG-01 0.820 22 47.5 PG-02 34 66.5 PG-03 43 76 PG-04 49 85.5 PG-05 61 104.5 PG-06 73 124 PG-07 273 339.5 PG-08 324 409.5 PG-09 407 514 PG-10 508 606.5 FEATURES Excellent sealing at high temperatures and pressures. Non-corrosive, non-wetting, non-contaminating and odourless. Excellent electrical and thermal insulation in virgin PTFE form. Excellent chemical and mechanical resistance. Very low gas leakage (complies with German Fugitive Emission Regulation TA-Luft). Minimized cold-flow and creep behaviour. Ideal for aggressive chemicals. Long service life. Easy to handle and cut. MATERIALS TYPES Virgin Teflon gaskets. Virgin Teflon gaskets are produced directly from pure material. They are used in the majority of general applications due to the most cost-effective type of PTFE material and possessing the greatest physical and electrical insulation properties. Filled Teflon gaskets. Filled Teflon gaskets are made from virgin PTFE material with an added substance to improve their sealing properties. The gaskets materials exhibit strong physical characteristics, the strength can be altered depending on the type of filler that is used to enhance the material. Expanded Teflon gaskets. Expanded Teflon gaskets are produced through virgin PTFE being expanded in a manner that creats uniform tension strength across the material. This process results in a PTFE material that carries no structural weakness and more flexible. They also exhibit the unique chemical resistant properties of virgin PTFE due to the fact that no additives are added. Three white virgin teflon gaskets on a ivory color background. Virgin teflon gaskets Some filled teflon gaskets with different sizes on a black background. Filled teflon gaskets Some expanded gaskets on a gray background. Expanded teflon gaskets
Gaskets, shaft, special-shaped pieces The shaped components are made of polymerization of PTFE resins, then it still need the double processing means or special production methods in order to achieve the precision.Thus they turned the Gaskets ,Shaft ,Special-shaped. Products Application: Application of -1800C to +2500C temperature under various corrosive medium in seals, tube parts, chemical corrosion resistant vessels, mechanical equipments wear down, lubrication materials, various frequency of insulating parts. Filled Material reinforced: 1) Graphite filled, increase thermal conductivity, lubrication, abrasive resistance 2) Cooper powder filled, increase intensity, abrasive resistance 3) Glass fiber filled, increase hardness and intensity 4) Carbon fiber filled, to increase intensity In addition, our company uses the existing machines to produce products according to customers¡¯ requirements of various components.
PTFE gasket.
