Specification:
, detection frequency range: 9khz~30mhz (kh3961) or 9khz~300mhz (kh3962)
, frequency stability: 1x 10-6
, frequency resolution: (9khz~150khz) 30hz; (150khz~30mhz) 1khz
, test tolerance: ¡¨¤2 db
, measure and detection method: pk, qp and av
, measure range from 20db|¨¬v to 140db|¨¬v
, frequency scanning step length: 20hz~2mhz
, sweep bandwidth: 200hz; 9khz; 120khz
, connect pc via usb and software can be run win7, win8
Kh3962 is an automatic emi receiver system. It is a main test system for emi (electro magnetic interference) testing. The kh3962 is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the emi test system, it solved the instrument self-emi problem. The test results are according to the international format test report. The emi test system kh3962 fully meets cisprl6-1, gb17743, fcc, en55015 and en55022.
Supplier: Wireless receive module, wireless transmit module, wireless transceive module, remote control, wireless relay/receiver, remote control copy machine, gsm/gps
Supplier: Digital tilt sensor, inclinometer, GPS, inertial navigation system, inertial measurement unit, tilt switch, machine control unit, wireless control system
Supplier: Industrial equipment, spare parts, materials and raw materials, industrial machines, industrial electronics, sensing element, monitor, sensor, transducer, transmitter, sensing unit, detector, sensor, gage, pickup, probe, sensor, transmitter, detecting device, detection device, automatic machines, vending machines, adjuster, controller, moderator, machine; lathe; press; bench, bedframe, bench, machine, tool, manufacturing machine, belt conveyer, conveyor, conveyor, line, pipe-line, pipeline, transporter, assembly-line, assembly line, industrial furniture, cables, cord, medical equipment, thermograph, thermovision camera, infrared scanner, temperature control unit, engine, motor
Supplier: Antennas, connectors, patch antennas, cable assemblies, GSM, 3G, GPS, GPRS, 4G, LTE, YAGI, patch, power cords, automotive accessories, mobile phone accessories
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: Satellite, electronics home & auto
Supplier: Large od connector casing 18 5/8" to 36",multistart connetors,wireline winches,indegral blade stabilizers,artificial air lift systems.
Buyer: Api 5l casing pipes of 18 5/8", 20" & 30" pipes,pup joints,cross overs
Supplier: Gpsglonass antennas, gps receiver modules, 5g antennas, combo antenna, gsm/3g antennas, 4g/lte antennas, 433mhz and 868mhz antennas, tv antennas, mimo antennas, wifi antennas, wlan and wimax antennas, various connectors and cables assembly
Supplier: Cr 603 Series Intelligent Boiler Steam Drum Level Gauge, Cr 606 Series Automobile Oil Level Sensor, Cr 6000 Series Gps Vehicle Intelligent Terminal And Cr 605 Series Universal Material (liquid) Level Meter, Transmitter, Digital Display Instrument, Safety Barrier
