Scintillator Crystal Bgo

Supplier: Scintillator crystal including CsI(Tl) scintillator, NaI(Tl) scintillator, BGO, LYSO, LaBr3,Ce scintillator, CWO, PWO, plastic scintillator

Supplier: Scintillation crystal growth, surface treatment and array assembly, bgo crystal, lyso crystal, yso crystal, beam combiner, light guide

Supplier: Ost photonics, crystal material products such as scintillation crystal, encapsulated scintillator, pixellated array and scintillation detector for nuclear radiation detection, laser crystals, optics and components for laser system and applications, ir windows and oem optics for thermal imaging cameras and applications.
Services: Manufacturing and developing

OST Photonics can supply lithium niobate (LiNbO3) wafers, lithium tantalate (LiTaO3) wafers, quartz single crystal wafers, various glass and fused silica wafers, GaAs wafers, SiC wafers, InP wafers, sapphire (Al2O3) wafers, Ge wafers and Si wafers in different specifications. Square plates, blanks and crystal boules are also available upon request. Other single crystal substrate materials including MgAl2O4, MgO, SrTiO3, LaAlO3, GGG, DyScO3, GdScO3, TbScO3, KTN, PMN-PT, LSAT, SrLaAlO4, YAG, YAlO3 (YAP) are also available on request. î?? What is the Difference Between SAW Grade Material and Optical Grade Material? Optical grade materials are materials with low strain and no impurities, they are grown from the best raw materials at a relatively slow growth rate, and are often used in optical applications where the highest quality is required. Optical grade wafers are widely used in optical devices and require excellent optical performance. SAW grade materials are primarily used in non-optical applications, and their growth raw materials rank second only to optical grade growth raw materials. The growth rate of this material is faster than that of optical grade material, which benefits mass production and cost-effectiveness. In general, these grades of wafers vary in material quality and use. Optical grade wafers are considered to be of the highest quality, while SAW grade wafers are relatively lower in price. The selection of the appropriate wafer grade is crucial, depending on the specific application and material quality requirements.

OST Photonics CdWO4 Scintillators(Cadmium Tungstate Scintillators) CdWO4 Cadmium tungstate crystal is a high density, high atomic number scintillator with a relatively high light yield. The emission maximum is at 475nm and the total light output is 12 to 15 photons/keV. The light yield relative to NaI(Tl) on a bialkali PMT is 30 to 50%. In addition, CdWO4 Scintillator cadmium tungstate scintillator also has the advantages of strong radiation resistance and no radioactive background. The high light output and low afterglow make it ideal for use with silicon photodiodes in detectors for medical and industrial Computed Tomography (CT) scanners. OST Photonics is able to supply CdWO4 crystals cadmium tungstate scintillator and CdWO4 linear or 2-D array upon your requests.

Cerium-doped Lutetium Yttrium Orthosilicate or LYSO(Ce) scintillator has the advantages of high light output, high density, short decay time, excellent timing and energy resolution. These properties make LYSO(Ce) becoming the most popular scintillators in Nuclear medicine (Positron Emission Tomography, PET/CT, and SPECT scan system), high energy physics, security scanners, and other applications. OST Photonics has a complete set of crystal processing and assembly line, we can process all kinds of lyso scintillation crystal and LYSO(Ce) arrays according to customer's requirements. We have our own laboratory to test the product performance to ensure that the product performance meets the requirements of our customers. We provide professional solutions for lyso crystal growth, surface treatment and array assembly. Application of LYSO Ce Scintillators (LYSO:Ce Scintillators) Positron emission tomography-computed tomography (PET-CT) Nuclear magnetic resonance imaging (NMRI) Single photon emission computed tomography (SPECT) High energy physics Advantages of LYSO scintillator (LYSO:Ce Scintillators) High light output High density Short decay time Stable chemical and physical lyso scintillator properties The Ability of OST Photonics Maximum Size: 105mm x 200mm Available items: monolithic crystal, scintillation screen, pixellated array

Li-6 lithium glass scintillator is a kind of inorganic scintillator which can be used for thermal neutron detection. It has the advantages of short decay time, high efficiency of slow neutron detection and good temperature performance. In addition, the Li-6 glass scintillator is easy to process and form, non-hygroscopic, acid and alkali resistant, can withstand the high and low temperature rapid change. Therefore, in the harsh situation that contains corrosive liquid and vapor, the lithium glass (Ce) can still work, but other scintillators cannot be suitable. Li-6 glass scintillator are widely used in neutron time-of-flight experiments, oil and natural gas exploration, moisture content measurement, nondestructive testing and neutron photography. OST Photonics can provide different specifications of Li-6 glass scintillators according to your requirements. Neutron time-of-flight experiments Oil and natural gas exploration Moisture content measurement Nondestructive testing(NDT) Neutron photography Advantages of Li-6 Glass Scintillators Fast decay time High efficiency of slow neutron detection Good temperature performance Non-hygroscopic The Ability of OST Photonics Maximum Size: �¸50mm x 50mm Available items: monolithic glass

Crystals such as sodium chloride (NaCl), potassium bromide (KBr) and potassium chloride (KCl) are uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10mm, and no impurity absorption. These single crystals are ideal materials for making optical elements for prisms, lenses, filters, and various windows in infrared devices and optical instruments. OST Photonics offers high quality KBr substrates for researchers and industries. Crystal orientation, size and thickness can be customized according to your requirements. Application of KBr Substrates Infrared devices optical instruments Advantages of KBr Substrate Uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10 mm No impurity absorption Ability of KBr Substrates Orientation:,,, etc. Dimension: 1, 2, 10x10mm, 20x20mm, etc. Thickness: 0.5mm, 1.0mm, 2mm, 5mm, etc. Available items: windows, substrates, blanks and customized optics

±-BBO (±-BaB2O4) is a negative uniaxial crystal which has large birefringence over a broad transparent range of 190nm to 3500nm. ±-BBO is an excellent crystal especially in UV and high power applications. The physical, chemical, thermal, and optical properties of alpha-BBO crystal are similar to those of Beta-BBO. However, there is no second order nonlinear effect in alpha-BBO crystal due to the centrosymmetry in its crystal structure and thus it has no use for second order nonlinear optical processes. Instead, alpha BBO is widely used for fabrication of polarizers, polarizing beam displacers, phase retarders, birefringent plates, and time delay compensators especially those for UV and high power lasers. Applications of ±-BBO Crystals High power Beam displacers for isolators. High power Polarizer Time delay compensators Advantages of ±-BBO Crystals High UV transmittance Large birefringence High damage threshold Here at OST Photonics, we value integrity, accountability, and punctuality. Our vision is to be the most professional and reliable supplier of crystal products in the world.