Brief Introduction for battery power rail cart The battery power rail cart is a kind of plant transportation equipment that has developed relatively rapidly in recent years, with advantages such as environmental protection, safety and convenience. Due to the use of battery power supply, there is the limitation for the using time. Operation Method for battery power rail cart The battery power rail cart can be equipped with two kinds of operating handles and remote control; the length of the handle is generally 3m or 5m, there are four keys and a joystick, the four keys are: start, emergency stop, forward and backward, the joystick controls the steering of the battery power rail cart. The remote control is a six-button control, including start, stop, go forward, backward, left and right turn, when turning left or right, you must press the corresponding direction key at the same time. When you start again, press the start button directly. Whatâ??s more, the operating handle and the remote control cannot control the battery power rail cart at the same time (the control box has a switcher with operating handle and remote switch). there are a handle-placed box
Product Description About the battery powered transfer cart, literally speak, it is an electric transfer cart with rails, which is the traditional and mature type transfer cart. More importantly, it has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop transportation. Working Principle The battery is installed in the battery powered transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the battery powered transfer cart to start, stop, go forward, backward, adjust the speed and so on. Custom Options Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Track or trackless, non-guided steering.Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Non-power transfer cart can be pushed by man power or towed by other electric cart including the forklift, winch, electric rail cart and so on. What's more,the transfer cart can be towed together, which can not only transfer more material but also save the cost with competitive price, especially the large capacity, we have rich experience to design with simple structure compared with other manufacturer. Many non-power transfer cart can be customized as per customers'
Powered platform cart, JH-103 This motor cart is drived by electric motor Save man force and rise loading capacity All electric parts are CE certificated Full Size 1455x630x1080mm Drive Motor 400W Plate Size 1280X630mm Battery 12V, 33AHX2 Plate height 300mm Charger 24V Net Weight 100kg Working time 4~5H Rated loading 500kg Charge time 10~12H Controller Box: Key for power ON/OFF Curtis Battery "Fuel" gague Emergency Stop Button Butterfly Buttom Trade Terms: 1. The price is based on regular packing condition/MOQ/FOB Ningbo or Shanghai, can be discussed with different trade conditions. 2. Supply ability: 200sets per month. 3. MOQ: 10PCS. 4. Payment term: TT, 50% prepaid, the rest 50% should be paid with 7days of B/L date. Delivery time: 40days after receiving the deposit. Packing details: 1. Packing type: 1PC/CTN, 2PCS/MDF borad pallet 2. G. W. /N. W.: 200kg/230kg 3. Packing size: 132x110x77cm.
Jinrui is one of the professional manufacturer rail transfer cart manufacturers and suppliers. Don't hesitate to import customized and cheap workshop and warehouse transfer cart, railway flat cart, industrial transfer cart from our factory or check the price and design with us. The kpx battery powered transfer flat cart is powered by batteries, can be used indoor and outdoor, such as metallurgy, foundry, new factory construction and construction building and so on. The kpx electric transfer cart is welded of strong steel, safe and reliable, wear-resistant. It has four steel wheels without requirement of railway construction, security, flexible and conveniet. It can travel in curves, no railway distance restrictions, so it can save the railway installation cost. The battery powered transfer carts also has a dc motor, reducer, start and stop smoonthly, easy to remote control, strong overload capacity. The reducer is small impact, low voltage and long service life.
Product introduction for low voltage powered rail cart The series of low voltage powered rail cart need to be stepped down to 380V AC through a transformer to receive three rails, the carbon brush on the rail cart takes power from the wheels, the current is introduced into the electric control box of the rail cart, and the step-up transformer inside the control box The three-phase power of 36V is boosted to 380V three-phase power, and then the power is supplied to the motor. The electric motor control system controls the forward and reverse rotation of the motor of the rail cart to control the forward, backward, and stop of the rail cart. Product characteristics for low voltage powered rail cart low voltage powered rail cart need to configure different numbers of ground control cabinets (including step-down transformers) according to the operating distance to compensate for the pressure drop on the track. An additional ground control cabinet needs to be added every 50 meters beyond 70 meters. It is suitable for indoor and long-distance transportation occasions with no water or dust. Product Structure for low voltage powered rail cart This series of rail cart is suitable for indoor transportation environment, or it can be used outdoors without water accumulation. It is more practical for frequent start-up and more frequent use.
Product Description About the powered die transfer cart, literally speak, it is an electric transfer cart for die and mold handling in industrial. The power supply of the powered die transfer cart can be choosed according different application, such as battery powered, conductor rail powered, cable drun powered, mobile cable powered, sliding wire powered and so on. Character
Kpx series storage battery electric plat-cart is powered by storage battery. Storage battery supples power to dc traction motor, and the dc traction motor drags the plat-cart moving. Technical parameters: Type : KPX-25 Rated load(t) : 25 Table size(mm) : 4500' 2200'650 Speed(m/min) : 30 Wheel tread(mm) : 2200 Wheel diameter(mm) : 400 Bottom-clearance(mm) : 60 Min. Turning radius : 50 Rail guage(mm) : 1435 Motor power(kw) : 3 Storage battery : 3d210ah 48v Rail code : p38 Wheel quatity : 4 Structure : box and girder Max. Wheel load(t) : 7.5 Material : steel. According to customers' demands.
Powered platform cart with fence, JH-105 This motor cart is drived by electric motor Save man force and rise loading capacity All electric parts are CE certificated Full Size 1275x630x1080mm Drive Motor 370W Plate Size 1275X630mm Battery 12V, 33AHX2 Plate height 300mm Charger 24V Net Weight 120kg Working time 4H Rated loading 500kg Charge time 8H Controller Box: Key for power ON/OFF Curtis Battery "Fuel" gague Emergency Stop Button Butterfly Buttom Trade Terms: 1. The price is based on regular packing condition/MOQ/FOB Ningbo or Shanghai, can be discussed with different trade conditions. 2. Supply ability: 200sets per month. 3. MOQ: 10PCS. 4. Payment term: TT, 50% prepaid, the rest 50% should be paid with 7days of B/L date. Delivery time: 40days after receiving the deposit. Packing details: 1. Packing type: 1PC/CTN/MDF borad pallet 2. G. W. /N. W.: 160/120kgs 3. Packing size: 132x110x77cm.
