Measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set
Model selection
Isoad16 u(a) -
485: output is rs-485 interface
232: output is rs-232 interface
Dimension:83*51*62mm
24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals. Communication software: Communication interface: 1 standard rs485 interface or 2 standard rs232 interface Communication agreement: standard ascii, modbus, can make network communicate With plc, rtu or watch software. Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit. Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\ 38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms. Anti jamming: Set checksum according to need. Its inside contains momentary bate diode, can Restrain surge impulse, protect modules. Model selection: Iso 4021a u(a) - Input voltage or current signal U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface 232/485: output is rs-232orrs-485interface, rs232/485 switchover freely Size:62*51*83mm
clients can order online by our website. Products selection guide: WJ21 U(A) Input signal(current/voltage) Communication Interface U10-5V A10-1mA 485 RS-485 output interface U20-10V A20-10mA 232 RS-232 output interface U30-75mV A30-20mA U40-2.5V A44-20mA U50-�5V A50-�1mA U60-�10V A60-�10mA U70-�100mV A70-�20mA U8user-defined A8user-defined Products List Samples: WJ21-A4-485 (4-20ma input signal, output is rs485 interface) WJ21-A3-232 (0-20ma input signal,output is rs232 interface) WJ21-A7-485(0-�20mA input,output is rs485 interface) WJ21-A4-232 (4-20ma input signal, output is rs232 interface) Other types,please check our datasheet. Analog Current signal to RS485 or RS232 Converter/Analog data acquisition module.Slim-line plastic housing with integral 35mm DIN rail mounting , power supply(8-32VDC) Features >> Analog signal acquisition,isolated RS-485/232 output >> 12-bit AD converter,testing accuracy>0.1% >> Can Program and calibrate modules accuracy via RS-485/232 interface >> Signal input/output: 3000VDC Isolation >> Wide Power supply:8~32VDC >> High reliability,easy programming,easy installation. >> Can program setting module address,baud rate >> 0-5V/0-10V/0-12V voltage signal or 4-20mA/0-20mA current signal input >> Supports Modbus RTU protocol >> DIN35 Rail-mounted >> Dimension: 106.7x79.0x25.0 mm
Features: > > 8 channel 4~20ma signal acquisition, channel to channel is isolated > > testing accuracy> 0.05% > > rs485/232 output, can programme the accuracy of module > > input/output/power supply three-port isolation: 3000vdc > > wide power supply: 8~50vdc > > high reliability, programming convenience, easy to install. > > users can set module address, baud rate. > > support modbus rtu communication protocal Applications > > temperature signal testing/monitoring/cintrol > > rs232/485 industrial automation control system > > industial field signal isolation > > process monitoring & control > > test sensors signal > > laboratory data acquisition > > medical machine monitoring > > 4~20ma signal acquisition Dimensions:123*70*30mm
Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.
L-signal measurement, and industrial-site signal isolation and long-term transmission and so on. Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming. Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside. Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80. Model selection Isoad16 u(a) - Vin/iin U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface Dimensions:58*87.5*59mm
Product Details: Minimum Order Quantity 200 Piece Frequency 860-960MHz Material pvc/metal/pc/pet Chip Alien H3 ISO Protocol EPC Class 1 Gen2 ISO 18000-6C Operating Frequency 65-868MHz (EU)/900-928MHz (US)/952-955MHz (JP)IC Type Alien Higgs 3 Memory EPC 96bit User: 512bit UID : 64bit Data Retention 50 years We are offering RFID Asset Tag to our clients.
Features: >> Input: Pt100/PT1000/PT10/Cu50/Cu100 >> Output signal: 4-20mA/0-20mA/0-5V/0-10V/1-5V >> Accuracy: 0.2 (FSR%) >> Containing linear and long-term compensation >> Power supply5V(� 10%)/12V/15V/24VDC (8-32VDC) >> Isolation voltage: 2500VDC (1mA, 60S) >> Installation: DIN35 rail >> Industrial temperature range: - 45 ~ + 85 >> Size:79x69.5x25mm Product description: The product is isolated Pt100/PT1000/PT10/Cu50/Cu100 temperature sensor transmitter, in industry mainly used for measuring the temperature of -200 ~ +500 . The transmitter has linear and long-term compensation, the factory in accordance with national standard Pt100 indexing table calibration, fully meets 0.2accuracy. Input, output and auxiliary power supply is completely isolated (three isolation), can withstand 2500VDC isolation voltage. Products using international standards for rail mounting DIN35, small size, high precision, stable performance, cost-effective, can be widely used in petroleum, chemical, power, instrumentation and industrial control industries. Samples: signal Input: Pt100,temperature range:0~100; signal output:4-20mA; power:24V Part No.: WJ11-Z1-T2-P1-A4 signal Input: Pt1000,temperature range:0~200; signal output:0-10V; power:12V Part No.: WJ11-Z5-T4-P2-V2 One In/One Out PT100 to 4-20mA/0-5V analog signal isolated converters/transducer/temperature converter/thermal resistance converter