Introduction:
This filtration plant is special for filtering waste cooking oil; it removes impurity, odor, water, acid and alcohol etc. from oil completely and effectively. Treated cooking oil color is limpidity, oil is good smell. This filtration plant is suitable for food factory, cooking oil factory, vegetable oil factory, it can help factory reclaim remnants oil. Also, TPF is a good filtration part for bio-diesel oil making.
The machine feature and working process:
1. This plant composed by two parts, one is the press filter, and other one is the vacuum oil purifier system. The press filter can remove the big and tiny impurity; the precision of purification can reach to 1 Micro. The Vacuum system equips three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition.
2. For the primary filter, which is made of the stainlessness steel, it is anti-rust and anti-corrupt, it mainly removes the residual impurity which escape from the press filter, making sure the oil have not any impurity when it goes into the water separator and vacuum separator.
3. The water separator, which equips the special filter, which mainly remove the mass water from the oil, because usually the waste cooking oil always contains much water, so we need remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water.
4. After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, Because our machine works under the vacuum and low pressure condition, so it dont need heat the oil to 100 C, usually it just need heat the oil to 45 C, Then it can remove the tiny water, soluble water, acid, alcohol and other volatility liquid and so on completely and effectively.
5. The fine filer, which is equips the stainlessness steel filter, the purification hole is less then 1 Micro, which can make sure the oil is completely clear, no any impurity.
Table Parameters:
Parameters Unit TPF -10 TPF -30 TPF -50 TPF -100
Flow rate L/H 600 1800 3000 6000
Vacuum degree Mpa -0.06 ~- 0.095
Working pressure Mpa í_0.4
Working Temperature C 0~80
Clean Degree NAS 6 Grade
Impurity Size ª¦m 1
Gas Content % 0.1
Acid Value mKOH/g í_0.05
Water content PPM í_10
Working noise dB(A) í_75
Electric heating power KW 36 55 72 84
Total electric power KW 50 68 86 98
Inlet (outlet) caliber mm º¦25 º¦25 º¦32 º¦42
Size mm 1700x1050x1750 1800x1050x1800 1800x1150x1800 2000x1250x1950
Weight Kg 650 720 880 1000
Cooking Oil Filtration Machine for Series COP
Cooking Vegetable Oil Cleaner
Cooking Oil Filtration Machine for Series COP
The cooking oil filtration machine is special for filtering used cooking oil, Coconut Oil,dirty vegetable oil , groundnut oil, olive oil,palm oil etc.
It can remove particle ,separate moisture, gas, free fatty acids, volatile odoriferous material,odor, and wax, foam in the waste oil.
The treated oil is clean, limpidity, and good smell. It is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, biodiesel factory,vegetable oil factory, and waste oil collecting store.
According to the treated oil usages, you can choose different machine body. For edible usage, we suggest you choose stainless steel body; For industrial use, we suggest you choose carbon steel body. If your oil contains too many impurities,we suggest you choose a press filter.
Feature:
1.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
2.The combination of coalescing separation and vacuum dewatering
3.Advanced dielectric condensation device
4.With H.P.M high polymeric absorbing material
5.Using the 3D Stereo-Evaporation technology, which can separate the odor and gas from the oil quickly .
6.This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the waterseparator device. So it is easy to control this machine.
Parameters
Item Unit COP-10 COP-20 COP-30 COP-50 COP-100 COP-150 COP-200 COP-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Work Vacuum MPa -0.06 ~ -0.095
Work Pressure MPa 0.4
Temperature 0 ~ 100
Power supply 380V,50Hz, 3 phase (or as needed)
Work noise dB(A) 75 75 75 78 78 78 80 82
Heating power KW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet mm 25 25 25 32 42 50 50 60
Net weight Kg 450 550 600 750 850 1000 1200 1500
Dimensions mm 1500 1000 1200 1500 1050 1600 1500 1050 1650 1600 1150 1700 1750 1250 1800 1900 1600 1950 1900 1700 2000 2100 1700 2100
Guarantee Value
Item Guarantee indexes
Moisture content 20 PPM
Demulsification value New oil15min,running oil30min
Impurity size 1 micron (no free carbon)
Gas content 0.1%
Clean degree 4 Grade (NAS1638)
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ETC. Please feel free to contact us.
Transformer Oil Filtration Machine
PLC Fully Automatic Transformer Oil Purification Machine
Transformer Oil Filtration Machine
Vacuum Transformer Oil Filtration Plant
1. Famous brand PLC control, fully automatic operation,
high precise filtering for insulating oil and transformer oil filtration.
2. Enhance the oil performace to protect the machine.
3. Low energy consumption.
4. Water content: 3ppm, impurity content: m, gas content: â0.1%.
5. Breakdown Voltage: 75KV
Product Introduction
This oil purification plant is applied to purify various of unqualified insulating oils including aging transformer oil,
specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the
insulating oil into the transformers on-line.
Features:
1. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa
2. High absorption speed: Absorption speed power 333L/Sr.
3. Duplex 3D stereo-evaporation: eliminating the liquid water quickly.
4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
5. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
6. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment.
7. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV.
8. The oil of any grades can be treated on line at the working site.
Vacuum Hydraulic Oil Filtration Machine for Series TYH
Hydraulic Oil Filtration Plant
Vacuum Hydraulic Oil Filtration Machine for Series TYH
TYH Series Hydraulic Oil Filtration Machine is specially used in the treatment and regeneration of fire-resistant hydraulic oil in the big and medium-sized thermo electric generator speed-governing system.
It can remove free water, emulsified water ,suspended solids and dirt from hydraulic oil.
Hydraulic lubricating oil treated by this machine contains so low emulsification value, few water content and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipment
Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on.
Features:
1.Strong capability of breaking emulsification, make the turbid and emulsified hydraulic oil become limpid and clear.
2.The combination of coalescing-separation filter elements and vacuum dehydrator.
3.Strong ability to filter the impurity, which can filter the particles completely.
4.It has the back flush system, which can clear impurities automatically.
5.Advanced dielectric condensation device
6.This machine installs the new pressure protector, which can control the temperature automatically;
7.We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
8. The unique degas and dehydrator system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology.
Technical specs( It will be changed as customer's requirements)
Item Unit TYH-10 TYH-20 TYH-30 TYH-50 TYH-100 TYH-150 TYH-200 TYH-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Vacuum Degree MPa -0.06 -0.095
Working Pressure MPa 0.4
Temperature 0 100
Power Supply 3phrase,50Hz, 380V(or as needed)
Working Noise dB(A) 75 75 75 78 78 78 80 82
Heating power kW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet caliber mm 25 25 25 32 42 50 50 60
Weight Kg 450 550 600 750 850 1000 1200 1500
Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100
Width mm 1000 1050 1050 1150 1250 1600 1700 1700
Height mm 1200 1600 1600 1700 1800 1950 2000 2100
Parameter After Purification
Vacuum Insulation Oil Filtration Machine for Series ZY
Vacuum Insulation Oil Purifier
Vacuum Insulation Oil Filtration Machine for Series ZY
Application
This purifier is applied to treat various of unqualified or used insulation oils including aging transformer oil, mutual inductor oil, switch oil,cable oil.
This type of Insulation Oil Filtration Machine can degas, dewater by low vacuum distillation,removing the impurities of insulating oil quickly and effectively. It improves the value of voltage value, oil dielectric strength, extends oil service life and make sure electrical equipment work safely. The power station and mine mainly use the machine to deal with transformer oil,mutual inductor oil, switch oil and cable oil.
Features:
1.This machine is small, hi-efficient conveniently. And it can live operated with electrical, vacuum oiling the power equipment and dry moisture of power equipment.
2.Distinctive removing the impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.3. This machine adopts a high effective vacuum and the internationally advanced stereo-evaporation technology
4.The oil of any grades can be treated on line at the working site
5.This machine can work independently; also it can work with the oil regeneration system.
Technical Parameter
Parameters Unit ZY-10 ZY-20 ZY-30 ZY-50 ZY-70 ZY-150 ZY-200 ZY-300
Flow rate L/h 600 1200 1800 3000 4200 9000 12000 60000
Working vacuum MPa -0.06 -0.095
Working pressure MPa 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5
Breakdown voltage KV 55 55 55 60 60 60 60 65
Moisture PPM 5
Gas content % 0.1
Impurity content 5
Temperature range 10 80
Power supply 50HZ380V(or as needed)
Working noise dBA 61 63 70 70 75 70 70 70
Heating power KW 11 13 15 30 48 52.5 57.5 60
Total power KW 12.5 14.5 16.5 33.5 51.5 57.5 65.5 68
Inlet/outlet caliber mm 25 25 25 32 40 50 50 60
Vacuum Lubricant Oil Filtration Machine for Series TYA
Vacuum Lubricant Oil Purifier
Vacuum Lubricant Oil Filtration Machine for Series TYA
TYA series Vacuum Lubricant Oil Filtration Machine is applied to recover and purify various high-precision lubricating oil,hydraulic oil, compressor oilgear oil, heat treatment oil,cutting fluids,quench oil and various industrial oils etc
It can remove free water,dissolved water, free gas, acid, emulsification, and eliminate impurity, big and small particulates,dust, and foam in the waste oil.
It can also eliminate metallic impurity,colloid,slude and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on).
It enhances the oil quality, restores the oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suitable for many lines, such as the mine, metallurgy, electric power, transportation,drilling and so on.Â
Features
1. Strong capability of breaking emulsification.
2. The combination of coalescing separation and vacuum dewatering.
3.The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology.
4. Advanced dielectric condensation deviceÂ
5. With H.P.M high polymeric absorbing material
6.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
Technical specs( It will be changed as customer's requirements)
Item Unit TYA-10 TYA-20 TYA-30 TYA-50 TYA-100 TYA-150 TYA-200 TYA-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Vacuum Degree MPa -0.06 ï½? -0.095
Working Pressure MPa â?¤0.4
Temperature â?? 0 ï½? 100
Power Supply 3phrase,50Hz, 380V(or as needed)
Working Noise dB(A) â?¤75 â?¤75 â?¤75 â?¤78 â?¤78 â?¤78 â?¤80 â?¤82
Heating power kW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet caliber mm 25 25 25 32 42 50 50 60
Weight Kg 450 550 600 750 850 1000 1200 1500
Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100
Width mm 1000 1050 1050 1150 1250 1600 1700 1700
Height mm 1200 1600 1600 1700 1800 1950 2000 2100
Parameter After Purification
Ultra High Voltage Vacuum Transformer Oil Filtration Machine (1000KV, ±800KV, 750KV, ±660KV project) ( two stage vacuum chamber) for Series ZYD-U
Untra High Voltage Transformer Oil Treatment Plant
Vacuum Transformer Oil Purifier
Application:
ZYD-U Series Ultra-high voltage Transformer Oil Filtration Machine with Double Vacuum Distillation is for Ultra-High Voltage transformers like 500KV, 750KV, 1000KV, it is mainly used to improve the properties of insulation oil for 66KV to 500KV project. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system.
ZYD-U series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Features:
1.ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine has one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages.
2.The pump of this product is adopted vacuum-pump imported from Europe, which have preceding level in the world, and with high air pump speed so as to get high working vacuity.
3.As the new technology, vacuum-segregating employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation.
4.Using new type of heating equipment , it can reduce heating burden and extend oil life.
5.Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil, mount the equipment to prevent super high and super low oil level. Spurting oil phenomena is never appeared.
6.As the clients requirement, they could choose equipment which their components were all or partly imported from overseas. Include touching screen and flow gauge is can be selected according to customers. This series could meet different kinds of customers need.
7. ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine equips filter assemblies imported from U.S.A. and it has large filtering area, strongly absorbent-dirt capability, high filtering precision.
8. Whether clients choose the oil pump from domestic or abroad, they all must be airproofed by our factory, moreover running without noise and leakage. extended oil life
ZLA series Waste transformer oil filtration machine is manufactured according to standards, which go beyond Chinese legal criterion, dealing with almost insulation oil of power equipment more rapidly and effectively with the supporting of high vacuum and speed absorption. Thus the strength of insulation oil is much increased and shorten the dealing time.
Features
1) Manufactured as per standards which go beyond the legal criterion.A primary breakdown voltage can raise 35KV and reduces the oil damage causing by normal purifiers due to repeated heating.
2) Large absorption speed double vacuum meets the needs of vacuum zing of transformer on an installation or repair site, at the same time remove the water,gas,and also keep the completeness of transformer oil.It significantly shortens the oil treatment time.
3) The unique gas, water removal system adopting stereo-evaporation technology, which rapidly separates the water and gas in the oil and is free of maintenance.
4) A superior purification system with top quality filter core, which can accommodate large quantity of impurities and is progressively dandified step by step. It has been got a high precision and multi-stage filtration.
5) Imported parts adopt all electric system, which ensures high performance.
6) Advanced infrared liquid level control system with automatic control, allowing separated operation of manual operators from a machine.
7) Interlocked safety protection device. i.e,backflow of A oil outlet over pressure can be achieved via an overflow valve, B oil inlet will interlock with heating system which avoids any possible negative impacts caused by mal-operation
8) Precision oil pumps have low noise and environmental regulatory compliance will be well met .
Technical Parameters
Model Unit ZLA-30 ZLA-50 ZLA-70 ZLA-100 ZLA-150 ZLA-200 ZLA-250
Rated flow L/min 30 50 70 100 150 200 250
Vacuum Range Mpa -0.05~-0.099
Temperature Range 40~80
Oil pump pressure Mpa 0.05~0.3
Total Power kw 38 46 62 90 120 144 175
Power 50HZ 380V
Working Noise db(A) 65 85
Cleanliness NAS1638 NAS 6
Breakdown Voltage kv 75
Water content PPM 3
Gas content in oil % 0.05
Filter precision µm 3
Inlet (outlet) diameter 25 32 32 42 50 60 60
Dimension mm
L 1480 1670 1820 2000 2100 2300 2300
W 980 1150 1300 1500 1600 1800 1800
H 950 1000 1200 1300 1600 1600 1600
Dimension and weight will be changed with changing the technical specification.
