Dissolved Air Flotation Plant

The unit technology uses extremely small air bubbles to lift suspended solids and oil to the top surface. The formed sludge layer is scraped into a sludge holding tank. The addition of coagulation and flocculation chemicals may be required to enhance the performance. Removal efficiency is usually superior to gravity bases systems and often applied as polishing step (downstream of CPI) The unit can be supplied with a gas-tight cover, coagulation & flocculation dosing and mixing equipment and air-saturation by special pumps or in separate pressure vessel. Flotation consists of separating solids from the water phase by attaching the solids to fine air bubbles to decrease the densityof the particles which float instead of sinking. The rising solids are called the and are skimmed off the surface and further processed in the sludge train.Chemicals can be added to improve the separation: first for coagulation and then for flocculation. The type of flotation used by Dissolved Air Flotation in which the suspension is saturated with air at high pressure. Bubbles are released to the water and will attach to the suspended solids.The bubbles from a system are much smaller than in other types of flotation systems and better adhere to the solids.This makes one of the most efficient flotation options of wastewater treatment.

Fully automated operations with datalogging, remote access and control Surface water or ground water application. Flow rate 10 m3/h raw water feed Weight Shipping: 2600 pound Operating: 5900 pound Dimensions 5.14 ft W x 11 ft L x 9.18 ft H Model Type Megacell Horizontal MCH-1 Frame material Wetted parts: SS316 Non-wetted parts: SS304 Power 230V, 3PH, 60 Hz, 40 Amps, NEMA 4

Fully automated operations with datalogging, remote access and control Surface water or ground water application. Flow rate 10 m3/h raw water feed Weight Shipping: 2600 pound Operating: 5900 pound Dimensions 5.14 ft W x 11 ft L x 9.18 ft H Model Type Megacell Horizontal MCH-1 Frame material Wetted parts: SS316 Non-wetted parts: SS304 Power 230V, 3PH, 60 Hz, 40 Amps, NEMA 4

Flat flow daf Flat flow dissolved air flotation for water clarification Daf sludge dewatering Significant advantage Ssoil removal rate over 95% Automatic discharge sludge, sludge concentration 2~4% No man need on duty The skid mounted structure is available out-of-the-box Flat flow dissolved air flotation for water clarification, daf sludge dewatering�manufacturer, supplier Why choose An efficient performance of solid and liquid seperation, whicn is from unique dissolved air and micro bubble manufacturing technology. Maximum operation capacity 300m3/h Instant power on and off Application fields Electroplating, f ood, slaughtering, brewing, tanning, printing and dyeing, paper making, chemical industry, cosmetics industry waste water treatment Flat flow dissolved air flotation for water clarification, daf sludge dewatering�manufacturer, supplier As a flat flow daf manufacturer, we can provide daf sludge dewatering, dissolved gas flotation, dispersed air flotation, daf municipal�and daf wastewater treatment.

Working principle: Ro reverse osmosis is relying on the reverse osmosis membrane under enough pressure, make solution by reverse osmosis membrane solvents in pure water, so as to achieve the goal of removing salt. The pore size of ro reverse osmosis membrane is only nanoscale. Under a certain pressure, h2o molecules can go through the ro membrane, while the inorganic salts, heavy metal ions, organic matter, colloid, bacteria, viruses, and other impurities in the raw water can not pass ro membrane. Thus pure water and reject water are separated. -

Working principle: Ro reverse osmosis is relying on the reverse osmosis membrane under enough pressure, make solution by reverse osmosis membrane solvents in pure water, so as to achieve the goal of removing salt. The pore size of ro reverse osmosis membrane is only nanoscale. Under a certain pressure, h2o molecules can go through the ro membrane, while the inorganic salts, heavy metal ions, organic matter, colloid, bacteria, viruses, and other impurities in the raw water can not pass ro membrane. Thus pure water and reject water are separated. -

Working principle: RO reverse osmosis is relying on the reverse osmosis membrane under enough pressure, make solution by reverse osmosis membrane solvents in pure water, so as to achieve the goal of removing salt. The pore size of RO reverse osmosis membrane is only nanoscale. Under a certain pressure, H2O molecules can go through the RO membrane, while the inorganic salts, heavy metal ions, organic matter, colloid, bacteria, viruses, and other impurities in the raw water can not pass RO membrane. Thus pure water and reject water are separated. -

Working principle: Ro reverse osmosis is relying on the reverse osmosis membrane under enough pressure, make solution by reverse osmosis membrane solvents in pure water, so as to achieve the goal of removing salt. The pore size of ro reverse osmosis membrane is only nanoscale. Under a certain pressure, h2o molecules can go through the ro membrane, while the inorganic salts, heavy metal ions, organic matter, colloid, bacteria, viruses, and other impurities in the raw water can not pass ro membrane. Thus pure water and reject water are separated. -

Air dissolved system Air dissolved system plant Air dissolved system manufacturer China air dissolved system supplier, plant, manufacturer Unique technology ----high frequency common rail injection, powerful centrifugal force from high-speed rotation; micron air integrated injection system, the ratio of dissolved air to water was close to the maximum value of henry�??s law in 3 seconds(27%), provide a platform for large scale micro bubbles, the dynamic factors are greatly reduced. As an air dissolved system manufacturer, we provide daf technical support, daf sludge dewatering, dispersed air