1.Products information
Amann girrbach system compatible zirconia blocks
Size¡êozi71-89*71*12/14/16/18/20/25
Each piece to a box
Technical data: Oxygen flow:0.5-5L/min Oxygen concentration:95.5%-87% Output pressure: 40-70kPa Pressure relief mechanism operational at: 250kPa + 25kPa Operation nose Level
Oxygen Concentrator - 0.5-10L/Min Purityï¼? 96% Compressor Life - 25000hours Sound Level 60dB Screen - LED Segment real-time display Power comsumption - 500VA Net Weight - 23k Gross weight:27kg
Fuel LPG. Fuel Tank Capacity 2.0 L Fuel Consumption : App. 225 g P/H Length : 350 mm Height : 330 mm Width : 150 mm Weight(kg) Empty : 1.5 Kg (Empty)
Terumo Runthrough NS PTCA is a medical device designed for use in percutaneous transluminal coronary angioplasty (PTCA) procedures. PTCA is a minimally invasive procedure used to treat coronary artery disease by widening narrowed or blocked coronary arteries. Here are some key points about the Terumo Runthrough NS PTCA: Manufacturer: Terumo Corporation is a Japanese company known for its medical devices and healthcare products. Type: The Runthrough NS PTCA is a guide wire used in PTCA procedures. Guide wires are essential tools that help navigate catheters and other interventional devices through blood vessels during angioplasty. Function: The guide wire assists in guiding and positioning the catheter within the coronary arteries. It helps the interventional cardiologist navigate through the blood vessels and reach the site of the blockage or narrowing. Features: The "NS" in Runthrough NS may refer to "non-support" or "normal support," indicating the level of support provided by the guide wire. The choice of guide wire depends on factors such as the location and severity of the arterial blockage. Usage: The Terumo Runthrough NS PTCA guide wire is specifically designed for use in PTCA procedures to help facilitate the placement of angioplasty balloons and stents.
Kubba Tactical Knee Pads Function: The knee joint is fixed, which improves the stability and strength of the knee, reduces the burden of the knee ligament when raising the leg and jumping, and enhances the protection of the knee ligament, with good air permeability and comfortable wearing feeling. Specification for elbow pads: Plastic protective block: PVC, Fabric: 600D Oxford cloth, Buffer layer: 15mm thick EVA foam sheet Lining: Mesh Army green color, with embroidered  Kubba  logo 6.Impact resistance: withstand the impact of 120 kinetic energy Structure: The plastic protective block is to resist hits and collisions and disperse the impact force. The middle foam absorbs impact energy Suitable environment temperature: -20~+55 Weight: 0.18kg/ pair Specification for knee pads: Plastic protective block: PVC, Fabric: 600D Oxford cloth, Buffer layer: 15mm thick EVA foam sheet, Lining: Mesh Army green color, with embroidered  Kubba  logo Impact resistance: withstand the impact of 120 kinetic energy Structure: The plastic protective block is to resist hits and collisions and disperse the impact force. The middle foam absorbs impact energy Suitable environment temperature: -20~+55 Weight: 0.25kg/pair
ECG cables also referred to as an ECG patient cable, is a type of cable connection designed for non-invasive heart monitoring, typically used to help diagnose potential heart issues. The ECG cable connects to electrodes which are positioned at specific locations on the patientâ??s body to detect and record heart muscle electrical activity. The cables then transmit the electrical activity back to the ECG device for analysis and diagnosis by medical professionals. ECG Cable Feature [Multiple Leads]: ECG cables usually have several leads placed in specific areas on the patientâ??s body, such as the chest, arms, and legs, to measure the heartâ??s electrical activity from different angles. [Durability]: ECG cables are constructed from top-quality, sturdy materials that can endure repeated bending, tugging, and twisting without sustaining any damage. This ensures that the cables can withstand the rigors of frequent use and remain reliable over time. [Shielding]: ECG cables are shielded to block out external electrical signals, which can interfere with the accuracy of the readings. [Connector Compatibility]: The ECG cables are available with various connector types, including snap, clip, and banana, to fit different types of ECG machines. [Safety]: ECG cables are designed to meet strict safety standards and regulations to ensure patient safety. This helps to ensure that patients are protected from any potential harm during the monitoring process. [Cleaning and Disinfecting]: The ECG cables are easy to clean and disinfect to maintain hygienic conditions, as they come into contact with the patientâ??s skin. ECG Cable Advantages [Excellent Performance]: ECG cables are built to withstand the rigors of twisting and bending, and have been thoroughly tested to ensure optimal performance. The cables are also equipped with electrical shielding to protect the signal integrity, ensuring accurate readings. [Non-Invasive]: ECG cables are non-invasive, which means that they do not require any incisions or invasive procedures. This reduces the risk of infection and makes the monitoring process much safer for patients. Instead, the cables are simply attached to the patient's skin, making it a quick and painless process.
Compatible cad/cam system: wieland zeno, wieland mini, roland, origin, yena, imes-icore, shera and vhf etc. Size¡¡§oow od98*10/12/14/16/18/20/22/25mm Size¡¡§oow od98*10/12/14/16/18/20/22/25mm
The PM5 Dental Machine is a Plasma Medical Titanium Surface Treatment Machine designed for cleaning, surface modification, and activation of titanium implant surfaces before placement in the patient's mouth. Specifications: Size (mm)(Width X Height X Depth) : M/C 600 x 680 x 640 Addition 600 x 760 x 640 (Total 600 x 1560 x 640) Axis: 5-Axis Manufacturable Material : Metal / Zirconia / PMMA / WAX / Glass Ceramic / Abutment / ETC Spindle : 1.8 ~ 2.7 kw / 60,000 RPM Air Cooling Accuracy: �?�± 1 Endmill: Metal 0.5 / 1.0 / 1.5 / 2.0 / 3.0, Zirconia 0.3 / 0.5 / 1.0 / 2.0, Glass Ceramic 0.6 / 1.0 / 2.0, PMMA 0.5 / 1.0 / 2.0 Inside System : Coolant + Air Suction Jig & Material : Disk Cr-Co, Ni Co, Soft Metal, Glass Ceramic, Zirconia, Wax, PMMA, etc, Cube Glass Ceramic, Abutment Titanium
A dental machine PM5 used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures. Specifications: Size (mm)(Width X Height X Depth) : M/C 600 x 680 x 640 Addition 600 x 760 x 640 (Total 600 x 1560 x 640) Axis: 5-Axis Manufacturable Material : Metal / Zirconia / PMMA / WAX / Glass Ceramic / Abutment / ETC Spindle : 1.8 ~ 2.7 kw / 60,000 RPM Air Cooling Accuracy: ± 1 Endmill: Metal 0.5 / 1.0 / 1.5 / 2.0 / 3.0, Zirconia 0.3 / 0.5 / 1.0 / 2.0, Glass Ceramic 0.6 / 1.0 / 2.0, PMMA 0.5 / 1.0 / 2.0 Inside System : Coolant + Air Suction Jig & Material : Disk Cr-Co, Ni Co, Soft Metal, Glass Ceramic, Zirconia, Wax, PMMA, etc, Cube Glass Ceramic, Abutment Titanium