1.Aluminum housing , good for heat dispatch , it is available in various lengths,
2.Milky cover.
3. Adopts high bright smd2835 light source, light uniformly, wide illuminate area, low light decay
4. The pins at two ends designed incorporate with the end part of
The light body, nice and elegant appearance look.
5. Long lifetimes, no maintenance, no mercury, no flickering, no buzzing
6.Ce, rohs, fcc, lvd certification
1.Single backing size:30mm*30mm*1515mm
2.Qty/ctn:25pcs
3.Outer box size:215mm*215mm*1550mm
4.Gross weight:15kg
LED fluorescent tube glass 120 cm (www.Beneled.nl) Replace the old-fashioned fluorescent tube 120 cm 1 on 1 with our LED fluorescent tube glass. The fitting of the LED fluorescent tube is identical to the old-fashioned fluorescent tube, so it always fits into an existing fixture with a T8 / G13 fitting. Pay attention! These LED fluorescent tubes work in 3 ways. 1. In an existing fixture with starter. Replace the conventional starter with an LED starter and you can use these LED fluorescent tubes. This LED starter can optionally be checked with the LED fluorescent tube. 2. In an existing fixture without a starter. You must adjust the wiring. The phase and neutral wire must be connected directly to 1 end of the luminaire / LED fluorescent tube. Ballast and starter are not required. 3. Connect our LED fluorescent tube directly to 230V at 1 end of the LED tube. On the LED tube the L and N are indicated on 1 side. You can connect the power directly to this side. Ballast and starter are not required. An extra energy saving can be achieved if the LED tube light is connected directly to the power. The phase and zero 230V must then be connected to 1 end of the LED fluorescent tube. Hours of life: LED tubes last more than 50,000 hours, compared to 10,000 from a good fluorescent tube Resistance: LED tubes are much more resistant to shocks or vibrations than fluorescent tubes. In fact, they are removable and repairable, something that is unthinkable for fluorescent tubes. Consumption: LED tubes consume considerably less than fluorescent tubes. A 600 mm-18 W fluorescent tube with reactance and starter can consume twice its nominal power due to the reactance. We are talking about a 36 W consumption compared to the 8 or 12 W consumption of the 600 mm LED tube. Started: the LED tubes can be started immediately and have no influence on their lifespan. When changing a fluorescent tube it is necessary to start and the number of daily inflammations influences the lifespan. For example, many fluorescent tube manufacturers estimate the lifetime of the tube in 10,000 hours, taking into account only 2 inflammations per day. Environment: LED tubes do not need gas to ignite, fluorescent lamps are manufactured with mercury vapor and mercury compounds are extremely dangerous chemicals for human health and the environment. How fast can I debit the switch from conventional tubes to LED tubes? This data depends on various factors: number of hours on, days, and hourly discrimination rate. We can provide sufficient objective advice so that you can have reimbursement conditions depending on the characteristics. Steps to take before investing in LED tubes Before you buy LED tubes, you must take into account the previous advice, value for money, to be able to purchase a LED tube with warranty. Also keep in mind that you have all CE and RoHS certifications.
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Powerï¼? 900W LED Qtyï¼? 72pcs 5W LED & 6pcs 90W COB Voltage ï¼? AC85-265V Work frequencyï¼? 50/60Hz Lumen ï¼? >15400Lm Dimmensionï¼? 660X385X118mm N.W ï¼? 11.4kg Coverage ï¼? 1.0Ã?1.2 m Warranty ï¼? 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, rice
Properties & Technical parameter: No.:HR-T8-18W-12T Luminus Flux: 1500lm-1800lm10©‡ Beam Angle:120 Working voltage: AC85-265V/AC277V Frequency: 50-60Hz Power Factor(PF): 0.95 Power Efficiency: >90% LED Consumption: 18W Luminous efficiency: 90lm/W Color Temperature: 3000-7000Koptional Color Rendering Index(CRI): 75 LED Brand: Cree or Taiwan optional LED Qty: 288pcs 3528 SMD Working Temperature: -20 to +40deg Working Humidity: 10%-90% Storage Temperature:- 20 to +40deg Light housing materials: Aluminum +PC Net Weight: 405g Lifespan: 50,000H. Gift box.
Warranty: 3 Years Lighting solutions service: Lighting and circuitry design Input Voltage(V): 85-265v CRI (Ra):80 Working Temperature(): -20 - 60 Working Lifetime(Hour): 50000 Lamp Body Material: Aluminum Alloy Application: Warehouse Light Source: LED Certification: CE, RoHS Luminous Efficacy(lm/w): 160 LED Light Source: SMD 2835 CCT: 2700K 6500K Length: 1200mm Power: 18W 20W Material: Aluminum Alloy+PC Cover: Clear Cover Milky Cover Input Volt: 85-265V AC/ 110-277V AC Power factor: PF 0.9 Advantages of Microwave Sensor LED Light Tube T8 1. High lumen, super bright 2. Microwave radar sensor tube light 20% light non-active or 100% light 3. No switches than traditional T8 tubes. 4. High quality aluminum, good heat dissipation performance. 5. Radar Sensor Module,Strong anti-jamming ability