Eter main shaft runs from the flywheel, through the housing and is supported by two
Flange bearings and one pillow block bearing. All bearings have grease nipples to increase longevity.
Auto feed
The tm-8 comes equipped with a mechanical drive automatic feed system. The single in-feed roller
Pulls the brush intothe chipper allowing for a much more efficient chipping process than that of a
Gravity fed system. The in-feed roller is driven off of the pto through a heavy duty gear box and
Slip joint splined drive shaft. The u joints are covered with a thick rubber boot to prevent dirt and
Debris from building up.
Housing ventilation
The tm-8 features multiple ventilation holes throughout the flywheel housing. The purpose of the
Ventilation holes is to help increase proper wood chip discharge through the shoot. As the flywheel
Rotates, the large paddles on the back, pull the air in through the ventilation holes and dramatically
Increases the air flow. This in turn, ensures a quick wood chip discharge without the worry of the
Chute clogging.
Technical details
Model Tm-8
Max. Dia. Of feeding
8''
Power required 25~45hp()540/720rpm)
Dia. Of chipper flywheel 24''(600mm)
Turning speed of chipper disk 1080rpm/1410rpm
Feeding system In-deeding by worm reduction
Feeding system Gear(4mm/s)
Feeding system Only forward function
Blade material Durable chromium cr-12
Sawdust measurement Thickness<4mm
Rotation angle of discharge chute 360 degree
Weight 405kg(900lbs)
Working efficiency 7~8 cbm/h
Package dimension(lxwxh) 1150x900x1350(mm)
20ft gp/ 40ft hc
22units/46units
Supplier: Wood charcoal,sawdust charcoal,hexagonal bbq charcoal
Wood Charcoal Moisture 5% Volatile 20% Ash content 4.9% Fixed carbons 69.5% Sulfur 0.07% Gross coloric value 7000 kcal
Supplier: Grains like corn, corn gluten meal, ddgs, soybeans, soybean meal, soy hull pellets, canola meal and pellets, cotton seeds and meal, and wheat, conventional or organic (non gmo), dairy products, frozen meats and seafood, plastic scraps, fish meal, fish oil, whey powder, flax seeds, beet pulp pellets, meat and bone meal, poultry meal, feed, 3d printers, beans, peas, nuts
Services: Commodities brokerage firm
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
