Hi-oh10/16/20 series are spring built-in hydraulic buffers, and are used at the bottom of the shaft, if the elevator gets out of order and slides down, it will take the decelerating effect, and the knockout rod will trigger the switch, and then the safety circuit is enabled.
Oh-10:
Rated speed: less than or equal to 1.0m/s
Buffer weigh range: 300kg~2500kg
Pillar gully routing(s): 100mm
Free state (l): 388mm
A*b (mm):150*90
A*b (mm):150*90
Diameter c (mm): 14
Hydraulic oil brand: hl-46
Oil is needed: 0.48l
Oh-16:
Rated speed: less than or equal to 1.6m/s
Buffer weigh range: 700kg~5300kg
Pillar gully routing(s): 175mm
Free state (l): 625mm
A*b (mm):210*100
A*b (mm):270*150
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 1.7l
Oh-20
Rated speed: less than or equal to 2.0m/s
Buffer weigh range: 1000kg~5300kg
Pillar gully routing(s): 290mm
Free state (l): 915mm
A*b (mm):210*100
A*b (mm):270*160
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 2.6l
Supplier: Automatic Fireball Extinguisher, Packaged Mineral Water, Foods & Snacks, Oil Home Supplies And Wholesale.
Supplier: Elevator components such as traction machine, control panel, door operators, complete cabin and entrance materials of all the finishes, guide rail, traction rope, safeties, oil and spring buffers, fan, elevator safety light curtains and escalator parts
Services: Consultancy service to the building owners and architects on selection and design of the vertical transportation for their building / project.
Elevator control cabinet
Handrail
speed governor
Supplier: Elevator parts, inlcuding mechanical parts such as car door, landing door header, speed governor, gearless traction machine, cabin, guide shoe, oil buffer, safety gear
Waterproof and breathable vents Are made from breathable membrane and stainless steel shells and sealing o-rings, membrane materials are imported from united states, outer shells are machined by stainless steel material. Waterproof and breathable vents can provide effectively not only waterproof and dustproof performance, but also prevent oil or other harmful substances entering equipment. Meanwhile they can keep the pressure balance of inside and outside equipment. Used in below area: Led outdoor lighting industry Automotive manufacturing industry Solar photovoltaic industry Electronics and electrical equipment industry Communications equipment industry Security equipment industry, etc.
Passenger Lifts The lift is ideal for retrofit within existing buildings with min. adjustment on site self-supporting steel structure minimum headroom pit 350 mm instead of 1300 mm pre-installed cabin and drive unit easy installation controller with micro-processor plug-in system complete drive unit in headroom (no separate machine room necessary) Technical information The information given below lists main features of our passenger lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles with guides T 70 x 65 x 9 Buffer 80/80 Cabin Cant-off system made of galvanized steel, adjustable guides shoes on two sides + emergency guiding Compensation device on suspension chain floor PVC covered Cabin light (flush installation) - Cabin ventilation Cabin push button station - emergency call - emergency light - emergency telephone call pre-installed Governor operated safety, type tested Special cabin apron (registered design application) Hinged doors ISO-PM 225 manual operated hinged doors, made of primed painted steel, window in Aluminium frame incl. door frame, Call button with stainless steel cover type tested door lock with fail safety lock Door closer - installed covered Horizontal sliding doors ISO-PA 300 powered horizontal sliding doors made of primed painted steel incl. door frame, cover panel, Call button with stainless steel cover type tested door lock with fail safety lock Machine room door double hinged door galvanized with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 and factory-made oil-filling, double disc brake and hand wheel, 3 x 400 V 50 Hz. chain wheels for chains 5/8 x 3/8" Controller Microprocessor in controller cabinet Installation pre-installed and plug-in system Floor selector (impulse driven)
Supplier: Aluminum And Aluminum Alloy Products, Steel, Stainless Steel Products, Building Materials (Excluding Dangerous Chemicals), Thermal Insulation Materials, Daily Necessities, Mechanical And Electrical Products, Auto Parts And Motorcycle Parts (excluding Engine Production And Processing)