Have good performance in wear resistance its weather aging resistance is superior than natural rubber £¬ apply to the material for rubber gasket.
1-50mm*0.6-2m*1-20m
Density:1.6g/cm3
1. Color: Black mostly 2. Size: flat board (300 300mm, thickness 1-25mm) Size: Reel board (width 200mm, thickness 1-25mm) Size: Rubber sheets(Thickness 1-30mm, width 500-2000mm, Length: 5-20m) 3. Tensile strength: 4 MPA or 3 MPA 4. Specific gravity: 1.5+/-0.05g/cm3 and 1.6+/- 0.05g/cm3 5. Hardness: 75+/-5 Shore A and 65+/-5 Shore A 6. Elongation: 250% 7. Surface: smooth or cloth wave. Inner: plastic film, outer: woven bag or pack according to the requirements of the customers.
Styrene-Butadiene (SBR) Blends of natural and SBR rubber. Application for industrial gaskets, washers, seals, protective linings, vibration pads, etc Excellent tensile strength, abrasion resistance and flexibility. Very little resistance to oil, gasoline, acid&alkali. Poor resistance to ozone and UV. 1-3 plies cloth could be inserted. Both side smooth or cloth wove
DESCRIPTION: NR / SBR blend rubber sheets / rolls are used in the commercial and industrial applications. This specifically designed rubber material is long-¬lasting that is suitable for operational use which provides excellent mechanical properties like high resilience, low compression set, high resistance to cut, tear & abrasion & also offers resistance to many acids, alkalis & salts. The operation temperature range is (-¬20°C to +80°C). It is available in wide range of hardness from 40 Shore A to 80 Shore A. It has very good physical properties like Tensile strength, wear & tears properties, Abrasion resistance. APPLICATIONS: NR / SBR Rubber sheets / rolls are used for wide range of applications like skirt board, bridge bearing, gasket for high pressure packing, heavy weight machinery packing, Para-¬quality for sand/shot blasting machinery & used as shock absorber. NR / SBR Rubber sheets/rolls can be used as shelf liner; workstation table liner and work area rubber lining that can with and moderate chemicals & alkaline solutions. These sheets can also be used for anti-abrasion lining for material handling machinery in mines alike industries PROPERTY: Excellent resistance to inorganic chemicals, water, air & heat up to 80°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals. NO. GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Elongation (%) 1 BNS-1240 1.20 40 80 600 2 BNS-1345 1.30 45 90 500 3 BNS-1450 1.40 50 70 450 4 BNS-1565 1.50 65 60 400 5 BNS-1670 1.60 70 50 300 PRODUCT DIMENSIONS Rotocure Finish Plate Finish SIZE (Mtrs) THICKNESS (MM) 1.2 x 10, 20, 30 3 to 12 Finish Smooth / Texture Impression SIZE (Mtrs) THICKNESS (MM) 1.2 x 2.4 3 to 25 1.0 x 2.0 3 to 25 MANUFACTURING TOLERANCES THICKNESS WIDTH LENGTH HARDNESS DENSITY + / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05 STORAGE OF PRODUCTS Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester)
according to your usage and requirements by rubber sheet , to customized production.
Rubber sheets are available in different sizes (thickness, width and length). Sheets are available in EPDM, SBR and EVA rubber and has wide application of use.
Product Description Size:1mm to 50mm Width:2000mm (max) Length:any length Color:black,red,grey,green,blue,tan etc. Fabric insertion available for request. Product Feature Performance:With moderate hardness, good abrasion resistance and elasticity, working under the higher pressure status at the temperature of -35 degree to 60 degree in the air. Technical data: gravity:1.05~1.8; Tensile strength:not less than 2.0Mpa; Elongation:not less than 200%; Hardness:40~85 shore A Application / Models Usage:Apply to the pavement of disposable ground carriage and work table, electronic and thermal aging sites, which can be used as oil proof materials, etc.
SBR,CR,NBR,NR,EPDM rubber sheet , rubber sheet with insertion, rubber sheet cloth both side , rubber sheet cloth both side with insertion, etc. Specification: Length: 1-50m Width: 500-2200mm Thickness: 0.5mm-80mm Technical parameter: Density: 1.1-1.8g/cm3 Tensile: 2.0-9.0Mpa Elongation: 100-500% Hardness: 55 -85 Shore A Usage: Punching washer, gasket ring make gasket board, seal of the door window. Apply to the pavement of disposable ground carriage and work table, electronic and thermal aging sites, which can be used as oil proof materials, etc. Material: Reclaimed rubber, SBR, CR, NBR, NR, EPDM Color: Black, red, white, blue, green, etc. Package: Woven bag or according customerí»s need. Packing in PP bag ,woven bag
We manufacture Natural, SBR, EPDM, Nitrile, Silicon, Viton rubber sheets. Kindly give us the width, thickness and length of the roll so that we can quote for the same. Also specify the any special specification required if any (as in insulation, lagging, oil resistant, heat resistant etc) Available from width 500mm to 2000mm All our products are tested in our in house lab
Great wall rubber company is a modernized enterprise group which takes the technical research, production, sale as a whole incorporation. It's located in the east of beijing , 60 kilometers from beijing international airport , and 100 kilometers from xingang port. The geographical environment is superior, and transportation is convenient. We have more than 2800 employees, and established beijing xinwanyou rubber & plastic technical research institute and great wall rubber & plastic research institute. The production is distributed in the whole country through our 58 branches which were founded in each big and medium-sized city in china . We persisted í¦the development is the hard truthí¦ policy, insisted on the science and technology is the first productivity, the quality first, the credit first, the first-class service as our management idea, dared to innovate.