Our products present divided into three series:
1 engineering machinery parts: mainly for earthemoving equipment spares.
2 mining machinery accessories: all kinds of crusher wear parts.
3 mechanical transmission parts mainly for industrial or heavy machinery
Description: Ring hammer crusher is a punching rotor type crushing machine with ring-hammer on the rotor. The material is firstly crushed by the punching force of the high speed ring-hammer rotating, then the crushed material is thrown forward to crushing board for the second crushing, required sizes material will get out through the sieve plate, but bigger sizes material will be shot back to the ring-hammer again for the third crush. Such process repeats until the materials are crushed to the required size. Applied scope: ring hammer crusher is suitable for many departments, such as mine, cement, coal, metallurgy, building material, highway, burning material and so on. The solid material with medium hardness brittle material¡¡¥s fine crushing is available from ring hammer crusher. Besides, ring hammer crusher can be used widely to meet customers different requirement of different product size by adjusting the gap between grates. Characteristics: The characteristics of simple structure, easy maintance make ring hammer crusher sell abroad, and be appreciated by
The hammer crusher (hammer mill) has good quality features like simple structure, high reduction ration, high efficiency, and etc. The pc hammer crusher (hammer mill) is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. Operating principle of hammer crusher: The motor drives the rotor rotated of the hammer crusher at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working chamber of hammers, they are crushed by the rotating hammers with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, while the large size products are brought back to the crushed area by the hammers for being recrushed until they reached the required size. In bulk or container.
Processing ability: 5-30t/h Max feeding size: ï¼?350mm Product Fineness: 5-30mm Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc. Brief Introduction of PC Hammer Crusher: PC Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds. Working Principle of PC Hammer Crusher: PC Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. Benefit of PC Hammer Crusher: 1.high capacity, high crushing ratio 2.uniform particle size, simple structure 3.Low investment, easy management and maintenance.
The hammer head is made of AMC composite material which is at international level and is developed by our company independently. The life of super hammer head branded as "Big Gold Teeth" is 50-150% longer than that of hammer made from Mn18Cr2MoNbRe. The reconstruction of crushing cavity with our patent of "stone strike stone" greatly increases the self-breakup rate of stones, which efficiently reduces the load of grate-shoe and hammer head. The technology of WHM two-step super hard surface interspersed welding is introduced for the rotor. The life of weld beadis over two times than that ordinary anti-abrasion welding rads. The main shaft is made of military gun steel with high strength the steel is made by means of vacuum double refining, whose strength is 4-5 times higher than that of ordinary shaft. New design of grate-shoe. The shones flow smoothly and stably. The size of stone is fine and even. The life of wall plate is long. Features Stones stricken by stones crushing cavity Hammer head is wearable Intensity of principal axis is higher Discharging granularity is fine and equality Easy maintenance Relialbe operation.
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher. Performance and features: Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%. Model PC400x300 Rotor diameter (mm) 400 Rotor length (mm) 300 Rotor speed (r/min)1100 Max. feeding size (mm)
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100mpa. Such as coal, salt, chalk, gypsum, bricks & tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also is applied instead of cone crusher.
Capacity:3-45t/h Feeding size:
Hammer crusher is mainly used for medium and fine crushing of medium hard bulk materials such as coal, gangue, shale, etc. It has a wear-resistant high chromium alloy hammer head, high hardness and wear resistance, and the sieve plate adopts a semi enclosed high manganese alloy structure, which has a wider adaptability to raw materials. This brick making machine has a weight of about 8T and is equipped with a steel box structure, making it extremely durable and reliable.
Hammer Crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available. Hammer Crusher Operating principle: The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
