Fuel Sensor

1. Height: 200~1600mm (customized) 2. Output ohm value, level warning, temperature warning. (customized) 3. External fuel filter optional 4. Installation: standard bayonet fixing (customized) 5. Tank ventilation 6. Suction and return pipes connected to the engine fuel pump 7. Suction and return pipes connected to the parking heater 8. Characteristics customized 9. Tube material: aluminium

Fuel Tank Level Sensor For " Land Rover & Jaguar " Part Number : LR087676

Short Description: CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols

Short Description: The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.

The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.

SOJI ELECTRONICS delivers "Advanced Fuel Management Solutions" and is the premium brand for capacitive fuel level sensor with outstanding features: high accuracy (up to 99.5%), wide operation temperature, flexible length, exact algorithm, smart software and easy installation.

PART NUMBER: Pressure Sensor VOE20796744 VOE 20796744 MODEL APPLIED: This Oil Pressure Sensor can work for Volvo D12 D13 Excavator Parts Precautions Please make sure the model number, part number and photo is the same as yours. Please rest assured to buy our products, we will ship as soon as possible and deliver the products to you faster.

What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.

Air Fuel Ratio Sensor for Automotive (AF series) 1000+ OEM & IAM part number reference 600+ application 50+ connector available Product Description - - Made in Taiwan - General in Japanese make automobile - New generation of four wire oxygen sensor - Ceradex single cell air fuel planar technology Advantage - - Patented know how of processing the core ceramic element to achieve excellent signal response. - Sensor components as well as raw materials are sourced from OEM suppliers and world leading companies. - 13 month warrantee from shipping date. Full range specification of sensor core ceramic element made in Taiwan! Premium Quality - - 100% simulation bench test via in house designed quality control equipment calibrated by SGS & CLS. - Multiple test and check station integrate within production outline ensure the highest quality and stability. - Every sensor manufactured go through function inspection and seal leakage test before dispatch. Taiwan Professional Automotive Sensor Manufacturer! Professional Service - - Two export point - Consolidation flexibility - Custom box / bulk packaging - Tailored instruction sheet - Custom label & bar-code - Product engraving - Product laser imprint 25 years of experience research and selling of oxygen sensor, export to 50+ countries worldwide! Certification - - IATF16949 certified by SGS (Automotive quality management system) - ISO9001 certified by SGS (quality management system)