Programmable Timer Relay

Features
1.Intelligent and digital led(light-emitting ) timer
2.1~8 channels, programmable and arbitrary combination and arbitrary output
3.Memory storage (10years) / mechanical life
4.Panel mounting
5.Delay time unit:0.1s/1s/1min(option)
6.Power supply (220v ac 50/60hz)
7.Input:transistor
8.100 groups of programme/time periods

1.New high-speed MCU chip with great speed
2.Big capacity of program and stable and reliable operation
3.Accomplishes the control of time-segment, sequential-segment and the program
4.Built-in 100 time relays
5.Be used in programmable fountain, programmable lights, sewerage, water supply, irrigation, bag pulse dust, electric boiler heating, street lights, neon light, water purifier,electric valve (solenoid valve)timing mud, grit removal control and so on.
6.The 220V/1A DC or AC load.
7.16/8-channel output

Next Power is the industry's leading independent supplier not only on and also of specialist of Relay and timer Supplies. Relay and timers suppliers in Worldwide. We can provide us with authentic products in product information and costumer relationship.

We are mainly dealing with our own brand be like OMRON, SIEMENS, ABB, ANLY ELECTRONICS, AUTONICS, CARLO GAVAZZI, CELDUC, EATON, DANFOSS, FINDER,.etc

We have a wide variety of Relay and timers products and all type of electronics items, We believe that you can also provide it in a better way. We supply these relay and timers to more suppliers in DUBAI-UAE, We have a wide variety of branded products.
Finder, Omron, Schneider Electric, Corsair, Meanwell, Siemens, Festo, Long - Power plus battery..etc.

HP-W series Digital Timer Relay
features:
1) 4 digit bright LED display, high accuracy: 0.5%FS
2) Power fail memory function
3) Auto cycle timing and delay output
4) 3 timing units, hour, minute and second
5) dimension: 48*48, 96*48, 72*72
6) timing range: 0.01S---999.9H
7) Power supply: 110/220V AC (48*48, 110V should be special ordered).



48*48,72*72,96*48 mm can be choosed,
one product in one standard paper box.

Product Usage

Programmable time relays include JSBXC-780, JSBXC-820, JSBXC-820, JSBXC1-850, and JSBXC1-870 series relays. Each type of relay has four types of warm-up time to choose from, among which JSBXC1-870 series The heating time can also be changed according to the special requirements of users.

The relay is used as a delay control in the circuit.



Applicable environment

a) Ambient temperature: -5~+40;

b) Relatively moderate: not more than 90% (temperature +25);

c) Air pressure: not less than 70KPa (equivalent to an altitude below 3000m);

d) Vibration: the frame rate is not more than 15Hz, and the amplitude is not more than 0.45mm;

e) Rated voltage: DC 24V, voltage fluctuation range 24X (1�±10%) V;

f) Working position: horizontal;

g) There is no harmful gas causing explosion hazard around, and good dust-proof measures should be applied.



Mechanical properties

1614996944256898.jpg



Electrical characteristics

.jpg

Note: The error range of the resistance value of the relay coil is ±(nominal resistance value10%)



Time characteristics

Applicable environment

a) Ambient temperature: -5~+40;

b) Relatively moderate: not more than 90% (temperature +25);

c) Air pressure: not less than 70KPa (equivalent to an altitude below 3000m);

d) Vibration: the frame frequency is not more than 15Hz, and the amplitude is not more than 0.45mm;

e) Rated voltage: DC 24V, voltage fluctuation range 24X (1±10%V;

f) Working position: horizontal;

g) There is no harmful gas causing explosion hazard around, and good dust-proof measures should be applied.



Mechanical properties

1614998643577125.jpg



Precautions

a) The identification pin numbers of the programmable time relays are the same. Please confirm the corresponding slow suction time of the corresponding type of relay before use.

b) Terminals 1, 2, 3, and 4 of the two coils of the relay are directly connected in parallel with the two diodes on the printed circuit; therefore, when measuring the electrical characteristics of the relay, the positive pole of the power supply must be connected to the terminals 1, 3, and the negative pole of the power supply must be connected to the terminals 1, 3. On terminals 2, 4.

C) Contacts 11 and 12 are already occupied by the relay, and the number of contacts that can be used by the user is 2QH, 1Q.

d) The position of the relay contact system is shown in Figure 1. When in use, the socket must be equipped with an identification pin.

e) The use environment of the relay should have good ventilation conditions and dust-proof equipment. And used in specially designed circuits; in special circumstances, the electrical characteristics and contact capacity of the relay should be considered to ensure the reliable operation of the relay.