Introduction to jig machine ltp34/2:
The jig machine ltp34/2 is a small type lateral-drive jig with double room. It uses water as the medium of gravity separator, and sorts the materials according to the specific gravity (density) of useful minerals and gangue. After entering the jig, materials are treated by water and gradually come into several layers, the light minerals float up to the upper layer and heavy minerals precipitate down to the bottom layer of the sorting slots, then the minerals are discharged from the jig machine through the discharge device.
The lateral-drive jig machine has the following advantages: taking less floor area, simple operation, less investment, profit quickly, etc. So this jig machine is wildly used in the extraction of tungsten, tin, gold, iron, lead, zinc, manganese and other heavy metals, very helpful in small-scale jig beneficiation.
Features of lateral-drive jig machine ltp34/2:
1. Small body size, easy to move, suitable for mineral processing of small watercourse.
2. Simple structure, easy operation and maintenance.
3. Less investment, profit quickly, this jig machine is an ideal choice for small gravity separator.
4. Wide application in different mineral beneficiation, reliable performance.
Product name: Deep hole drilling and boring machine Detailed product parameter description: Product model: Texas deep hole drilling and boring machine (T2120) Main technical specifications and performance Technical specifications parameter Working scope Maximum boring diameter 200mm Drilling diameter range N40-N80mm Maximum boring depth 1000-8000mm Working support diameter range 60-300mm Spindle Spindle center height 350mm Headstock spindle bore 75 Spindle front end taper hole 85mm1:2 Spindle speed range 61-1000r/min 12 types Feed Feed speed range (stepless) 5-1000mm/min Fast moving speed of carriage 2m/min Motor Main motor power 30kW Hydraulic pump motor power 1.5kW Power of fast motor of carriage 3kW Feed motor power 4.4kW Cooling pump motor power 5.5kW4 groups other Cooling system rated pressure 2.5MPa Cooling system flow 100 200 300 400L/min Rated working pressure of hydraulic system 6.3MPa The oiler can withstand the maximum axial force 6.3KN Maximum preload force of the oiler on the workpiece 20KN Dimensions and weight length parameter 1000 2000 3000 4000 5000 6000 7000 8000
Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Descriptions Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%. Advantages and Characteristics 1 High capacity 2 High concentration ratio and high recovery 3 Easy to install, operate and maintain 4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 5 Saving water 30-40% than ordinary jig 6 The pulsation speed very easy adjusted by regulator 7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc
YG-2 Double Heads Digital Control Pump E Liquid Bottle Filling Machine e liquid filling machine , e liquid bottling machine , pump e-liquid filling machine, double heads e liquid bottle filling machine ChinaCoal02 YG-2 Double Heads Digital Control Pump E Liquid Bottle Filling Machine uses self sucking pump and flow time to control filling volume.
FM400 2 In 1 Shrink Packaging machine L sealer, Shrink Packaging machine, Shrink Packager ChinaCoal02 Features:Film sealing, cutting and shrink in one operation.A very economical packaging machine for small amount productivity.Use POF, PVC as packaging materials.Two functions for option: one is only seal-cut; another is both seal-cut and shrinking.
Saw-tooth Wave Laboratory Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Advantages and Characteristics 1 High capacity 2 High concentration ratio and high recovery 3 Easy to install, operate and maintain 4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 5 Saving water 30-40% than ordinary jig 6 The pulsation speed very easy adjusted by regulator 7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc Main Technical Parameters Model Hutch Diaphragm Feeding Size (mm) Makeup water (m3/t) Makeup water pressure (Mpa) Capacity (t/h) Power (kw) Dimensions (mm) Weight (Kg) Shape Area (m2) Stroke (mm) Frequency of stroke (r/min) JT0.57-1 Trapezoid 0.57 8.5 12 10 17 12-21 80-180
Introduction Jig separator —introduction An equipment realizes the separation of light and heavy mineral by the different sedimentation speed in vertical alternating water flow Product improvement Jig separator — product improvement The cone slide valve is adopted; the failure rate is reduced by 80%; low energy consumption;the separation of different material, improvement of the processing capacity by more than 35%. Advantages Jig separator — advantages Professional mining separator machine high efficiency jig separator : Stroke and jig frequency are easy to adjust; the advanced frequency conversion speed control technology is convenient to operate and manage Small cover area, high processing capacity per unit area
JT series Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.Shicheng Pioneers Mining Machinery Manufacturer Factory has strong technical advantage and production power on rougher jig machines production, and wins customers¡¡¥ support and trust deeply.
Jig is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance. Sawtooth wave jig is a new type of jigs,It is one of the types of modern gravity separation equipment. New it has formed series whose use is expanded. Such type of jig uses electromagnetic stepless speed regulation which features even rotation, smooth ore current, strong adaptability to selected materials, good separation effects of medium and fine grains, and water saving. Sawtooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level, it is one of the ideal energy-saving gravity concentration equipments. Features: High quality ,precision manufacturing High capacity, high recovery ratio, Widely use range, large range of separation size, Energy conversation, no pollution Simple installation and easy to maintenance The work safe and reliable, long working life Technical Parameters Model JT1-1 JT2-2 JT3-1 JT4-2 JT5-2 Jigging Chamber Shape trapezoidal rectangular trapezoidal rectangular trapezoidal Length (mm) 450~900 1070 960~2000 1510 1200~2000 Width (mm) 1500 1070 1950 1510 3150 Column Number single single single single single Chamber Number (one) 1 2 1 2 2 Single Area (m2) 1 1.14 3.3 2.28 2.12(single) 2.77(double) Aggregate Area (m2) 1 2.28 3.3 4.56 5 Feeding Particle Size(mm) 5 5
Drill Bushes and Jig Bushes, Be it a plain jig bush, headed bushes, renewable bushes, liner bushes, location bushes, anchor bushes or serrated bushes. We have the combination of drill jig bushes to meet your requirement. With the stocks of standard drill bushes in the India. Both metric and imperial sizes are available. Manufactured to IS(Indian Standards), JIS, BS, ISO, and DIN standards. Long life nitride drill jig bushes are also available. If your need is for a nonstandard drill bush contact our Sales team will be happy to provide you with price and delivery. Fast turnarounds available on special drill bushes. Technical Features PRESS FIT BUSHINGS to IS 666 of 1972 â?? PART I (Indian Standards) LINER BUSHINGS to IS 666 of 1972 Part-II (Indian Standards) RENEWABLE DRILL BUSHINGS IS 666 OF 1972 PART-II (Indian Standards) BS 1098 PT.2 1977 / ISO 4247 / DIN 179A// DIN 172A OTHER STANDARDSANSI (Metric) and JAPANESE (JIS) on application All standard stocked items are available on a next day service. Drill bushes are highly accurate guides for drills and reamers. Drill bushes work by ensuring the drill enters the work piece straight and with defined accuracy. Drill bushes also prevent drill wondering, chatter and drill breakage. In a classic drill bush setup, a jig is located and locked onto the work piece to ensure repeatable positioning of the drill bushes and resultant drilled holes. Drill bushes lend themselves to not only drilling applications, but for location, alignment and rollers, due to their accuracy. Other Products for Tooling & All Industries 1. Guide Bushes 2. Receiver Gauges Guide Bushes 3. Fixture Using PIN & BUSHES 4. Locating Pins 6. Brass & Phosphor Bronze Bushes 7. Guide Bushes for SPMs 8. NITRIDED BUSHINGS 9. Non-Standard Bushings