Blast Furnace Granulatd Slag, Ferrous Sulphate

Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.

Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.

Product Name:Aluminium sulphate Molecular Formula:AL2(SO4)3 Hs Code: 2833220000 CAS Code:10043-01-3 Standard:HG2225-2010 Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter. Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive. Specifications Item Name Standard AL2O3 15.6% 16.5% 17% Fe2O3 ¤0.5 % 0.005 % 0.004% PH value .0 3.0 3.0 Water insoluble matter 0.2% 0.04% 0.03% Packing 25kg or 50kg or 1000kg in plastic lined woven bag

Product Name:Aluminum sulfate Molecular Formula:AL2(SO4)3 Hs Code:2833220000 CAS Code:10043-01-3 Standard:HG2225-2010 Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3�·18H2O; AL2(SO4)3�·14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter. Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive. Specifications Item name Standard AL2O3 15.6% 16.5% 17% Fe2O3 0.5 %  0.005 % 0.004% PH value 3.0 3.0 3.0 Water insoluble matter 0.2% 0.04% 0.03% Packing 25kg or 50kg or 1000kg in plastic lined woven bag