Car parking heater-CE standard
Working principle
This heating system uses the gas or diesel as the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them.
Scope of application
Warming up the cab of freight vehicles and electric automobiles.
Warming up the compartment of medium coaches (iveco, ford transit etc)
In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc)
Each kind of special vehicles of field work.
Warming up for each kind of ships.
Cell phone, telephone remote control
Voice prompt control
Sms control, it can set up the start/close time
No distance, obstacles limitation
It can start the heater at any time when you need
Product advantages
Do not need to start the engine, preheat the engine and compartment at the same time
Avoid attrition the engine of cold starting at low temperature
Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately.
Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car.
When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel.
Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time.
Technical specifications
Technical specifications
Thermal power 5000w
Fuel Gas diesel
Rated voltage (v) 12v 24v
Fuel consumption (l/h) 0.17-0.6
Rated power (w) 15-90
Working temperature ( ° c) -40° c -~+20° c
Weight (kg) 5.9
Dimensions l× w× h (mm) 425× 148× 162
50*24*26cm
Multi-functioncal vw mobile street food cart has its unique advantage, It allows small entrepreneurs to solve the two difficult problems of location difficulties and rent expensive,the mobile shop decoration costs low,to reduce the responsibility of the entreprencurs, The most attractive is that it can move at any time,where the customer,where the dining car goes,to solve a series of problems later.
Multi-functioncal vw mobile street food cart has its unique advantage, It allows small entrepreneurs to solve the two difficult problems of location difficulties and rent expensive,the mobile shop decoration costs low,to reduce the responsibility of the entreprencurs, The most attractive is that it can move at any timewhere the customer,where the dining car goesâ??,to solve a series of problems later.
Working principle The heater is connected between the vehicle engine, warm fan and water tank. When the heater is working, the cooling liquid of the engine will be circularly heated through the heater furnace cavity. In such way, the temperature of engine, warm blower, water tank and cabin will gradually increased. Scope of application Warming up the cab of freight vehicles and electric automobiles. Warming up the compartment of medium coaches (iveco, ford transit etc) In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc) Each kind of special vehicles of field work. Warming up for each kind of ships. Remote control Compact structure Remote control distance at 100m(no obstacles). Start or close the heater at any time. Product advantages Do not need to start the engine, preheat the engine and compartment at the same time Avoid attrition the engine of cold starting at low temperature Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately. Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car. When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel. Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time. Technical specifications Technical specifications Thermal power 5000w Fuel Diesel gas Rated voltage (v) 12v 24v Fuel consumption (l/h) 0.17-0.6 Rated power (w) 15-90 Working temperature ( ° c) -40° c -~+20° c Weight (kg) 5.9 Dimensions l× w× h (mm) 425× 148× 162. 52*24*26cm
Working principle This heating system uses the gas or dieselas the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them. Scope of application Warming up the cab of freight vehicles and electric automobiles. Warming up the compartment of medium coaches (iveco, ford transit etc) In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc) Each kind of special vehicles of field work. Warming up for each kind of ships. Timer control Install on the panel It can set up the start/close time; also can use the switch operation Product advantages Do not need to start the engine, preheat the engine and compartment at the same time Avoid attrition the engine of cold starting at low temperature Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately. Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car. When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel. Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time. Technical specifications Technical specifications Thermal power5000w FuelGas diesel Rated voltage (v)12v 24v Fuel consumption (l/h)0.17-0.6 Rated power (w)15-90 Working temperature ( ° c)-40° c -~+20° c Weight (kg)5.9 Dimensions l× w× h (mm)425× 148× 162. 52*24*26cm
Supplier: 1. copper cathode
2. copper wire scrap
3. sunflower oil
4. soybeans seeds
5. used rails
6. palm oil
7. urea 46% nitrogen granular
8. white corn
9. sisal fiber
10. cashew nuts
11. sesame seed
12. hardwood charcoal
13. a4 paper
14. icumsa 45 sugar
15. wood pellets
16. paper scrap
17. used engines
18. yamaha cardboard engines
19. pet bottle scrap
20. almond nuts
21. pistachio nuts
22. battery scrap
23. computer scrap
24. phone scrap
25. beef meat
26. goat meat
27. lamb meat
28. wet salted cow
29. cocoa
30. Arabica Coffee
31. Ubc Aluminum Scrap
Services:
Used Engines HS Code 840820 PRICE = US$1,800/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine. SPECIFICATION General Engine Specifications Basic Engine Specifications I-6, 4-Stroke-Cycle-Diesel Displacement .......................................................................... 12.88 L (in3) Rated engine speed .................................................................... 2300 rpm High idle speed ........................................................................... 2530 rpm Low idle speed (programmable) ................................................... 550 rpm Peak torque ......................................................... 3,355 N m @ 1200 rpm Bore ....................................................................................... 135 mm (in) Stroke ...................................................................................... 150 mm (in) Aspiration .................................. Supercharged-Turbocharged-Aftercooled Governor ............................................................................................. ECU Fuel system type .................................................................. Common Rail Length ........................................................................... 1960 mm (77.1 in) Length to flywheel housing ........................................... 1476 mm (58.1 in) Width ............................................................................. 1195 mm (47.0 in) Height ............................................................................ 1117 mm (43.9 in) Weight, net dry (approx.) ................................................1672 kg (3686 lb) Rotation (from flywheel end) .......................................... Counterclockwise Flywheel housing/flywheel .................................................... SAE No. 01M Flywheel teeth ....................................................................................... 155 Tolerances Power ............................................................................................... +/- 3% Exhaust Stack Temperature ............................................................ +/- 8% Inlet Air Flow .................................................................................... +/- 5% Intake Manifold Pressure ............................................................... +/- 10% Exhaust Flow ................................................................................... +/- 6% Specific Fuel Consumption .............................................................. +/- 3% Heat Rejection ................................
Car cover Material: 150D oxford fabric Size: S-XXL or customized With strap, mirror pockets, zipper, and reflective strip Company overview Huaqi industrial(Member of Anma Group) is professional in the manufacture and sale of automotive supplies, automotive modified parts, auto parts. Products are exported to Europe and the United States, the Middle East, Southeast Asia, more than 40 countries and regions, currently has more than 350 agents and co-clients, mainly supply include AUTOZONE, TESCO, K-MART, ALDI, BDK, SUPERCHEAP and other internationally renowned chain stores, export business is growing. 2019 the company's total export business amount over $86 million(about RMB650million). 4 WAYS TO BUILT "ONE-STOP" SERVICE 1) Our Group company has owned 4 factories in Zhejiang to produce 30% of Car Accessories including car mats, seat covers, steering wheel covers, car covers, sunshade, booster cable, etc 2) Over 300+ high quality factories cooperated with Anma Group over 10 years relationship to provide 25% of rest car accessories. 3) Our Group company has invested over 28 factories as a shareholder to control another 30% key products of car accessories. 4) We work for factories as the exclusive export agent to help them sell and develop their products. At the same time, those factories ' products built 15% of Our Car Accessories.LE REASONS
110V 6KW Mobile Steam Car Washer With one Steam Gun (not include vacuum cleaner) What advantages of steam car wash Mahine  *Convenient to move, can be door to door cleaning service. *Water saving, environmental protection and cost saving. *High temperature sterilization, can clean the engine, interior, air conditioning. *There is no water, it is washed and dried, no need to wait. *Effectively reduce the aging of parts. *The pressure is high and clean dirty more easy. Feature: steam car wash machine pipe drain cleaning 1)Separation of water and electric,adjustable wet/dry. 2)Non-boiler for safe use. Our machine is without boiler,free from explosion. 3)Quick start. Only 60s for cold start,quick start at standby state. 4)Small size, light weight and easy to carry. 5)With water shortage protection, leakage protection, over temperature and pressure protection. ***PLC + Touch Screen The machine use PLC + Touch screen,all the information show on the screen,use more intelligent. ***Auto-Descaling The machine with auto-descaling function,add descaling agent into water tank, choose auto-decaling it will do decaling automatically. What's Function Does The VTD6A-N Steam Cleaning Machine Have ? steam car wash machine pipe drain cleaning 1. Steam steam can be used to clean the outside of the car, the inside of the car, the car engine, the air conditioner, the cleaning of the kitchen, the hood, the sofa carpet, etc. 2. Cold Water When the outer body of the car is dirty or there is a lot of mud, you can use high-pressure cold water to soften the mud in advance, and then use steam to clean it, so that the cleaning will be faster and more convenient. 3. Hot Water When it freezes in winter, there is mud on the car body. You can use high-pressure hot water to soften the mud in advance, and then use steam to clean it, so that the cleaning will be faster and more convenient. The various functions of the machine can meet the cleaning work in different environments. How to use the Steam Cleaning Machine Cleaning Carpet? The machine is equipped with a vacuum cleaner, which can be used to clean the carpet by connecting the vacuum cleaner to the carpet handle. Steam has the function of high temperature sterilization The high temperature of the steam can quickly dissolve stains and oil stains, kill bacteria while dissolving stains, and play a disinfection role, which cannot be achieved by general cleaning machines.  Application:steam car wash machine pipe drain cleaning Car wash shop, underground car wash business, parking lot (in supermarket, living department, industry zoom, park, etc.) Additional information Weight 150 lbs Material stainless steel Item weight 25 KG Item dimension 40x50x40cm / 15.75 19.69 15.75 Inches Voltage 110V, 50/60 HZ, single phase power Power 6KW Pressure 8-10bar Water tank 16L Steam temperature 200~230 Steam Production Time 60 seconds Steam gun 1, no boiler Accessories Steam Vacuum Nozzle 10M steam Pipe Steam be
Supplier: Mobile phone accessories, smart phones, camera accessories, display technology (vending machine w, transparent display), visual merchandising technology (transparent monitor display windows), power banks, headphone, earphone, in-car accessories
