Specifications Pumping Mechanism Curvilinear peristaltic Enteral Feeding Set Standard enteral feeding set with silicon tube Purge, Bolus Purge when pump stops, bolus when pump starts, Infusion Mode mlh
D type cast iron and ss multistage boiler feeding pump and clean water pump D type multistage boiler feeding pump overview: It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°c to 150°c and the water pump inlet pressure should be less than 0.6m pa. Product feature: 1. About d model pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head. 2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water. D type pump Dg boiler feeding pump
Product List: Products Name Model 1. Medical Enteral Feeding Pump JYB-500 2. Medical Enteral Feeding Pump with Barcode Scanner JYB-500S 3. Medical Fluid Warmer JFW-500 4. Medical Infusion Pump JSB-1200 5. Medical Infusion Pump with Drug Library JSB-1200Y 6. Medical Single Syringe Pump JZB-1800 7. Medical Double Channel Syringe Pump JZB-1800D 8. Medical Stackable Syringe Pump JZB-1800C 9. Medical Syringe Pump with Drug Library JZB-1800Y 10. Medical TCI Syringe Pump JZB-2000TCI 11. Medical Syringe Pump with SpO2 & Heart Rate Monitoring JZB-2000H In carton
Technical specifications ParameterSpecification Flow rate:1 -500ml/h (1ml/h increments) Target infused volume:0~9999ml (0.1ml increment) Infused volume:0~9999ml (0.1ml increment) Accuracy:Flow rate +/-10% according to the clinical setting Alarms:Infusion finish, no fluid detected, low battery, operation error Power source:Ac power supply: ac 100 -240v +/-10% Built-in lithium battery: rechargeable. 11.1v, 2000mah, Approximately 5 hours of continuous operation on a new and fully charged battery at 25ml/h Power consumption:
ChuangRui Industrial Filling & Transfer Peristaltic Pump BG600FJ-S/YZ35 With Flow range 1.3-12000 ml/min. which can work with 2 tube sizes (73# 82 # ) to meet different flow requests. 2 work modes suitable for various Liquid Transfer & Filling. Peristaltic Liquid Pump Application 1 Industry : Hard material processing Model : BG600FJ-S/YZ35 Liquid : Grinding fluid Function : constant transfer Tube : Norprene Chemical Peristaltic Pump Tubing 82# External control : start/stop
Head - Up to 250 mtr Flow - Up to 20 m3/hr Temp - Up to 105 degree C MOC - CI, CB, Bronze, CI/SS Applications: Boiler feed Marine Fuel oil Power plant Industrial clean water condensafe water Multi storied building water supply
Equipment Name DG Sub-high-pressure Boiler Feed Pumps Specifications Range of head: (m). Range of head: 500 ~ 1050. m Range of quantity(m3/h). Range of quantity: 12â??280m3/h. Introduction A DG Sub-high-pressure boiler feed pump is a segmental mono-casing multi-stage pump, where its inlet and outlet flanges are vertically upward, centrally supported to effectively prevent central asymmetry and vibration due to thermal expansion, its cooling water runs in a piping-main scheme system, and it provides a mechanical seal self-flushing system for user-friendly connection. It is characterized by a compact structure, attractive appearance, and reliable operation. The pump rotates clockwise when looked in the coupling direction.
MDG Boiler Feed Water Pump Size (discharge): 1 inch to 32 inch Capacity: 3.4~ 15000 m3/hr Head: 8.6~140m Efficiency:Up to 92% Materials:Cast iron,SS 304,SS 316,Bronze etc. MDG Boiler Feed Water Pump Introduction: MDG Boiler Feed Water Pump can deliver clear water without solid particles or other liquid which the physical and chemical feature is similar with clear water. The boiler hot water circulating pump is suitable for boiler feed water or feed water of high-pressure boiler. The temperature range of liquid is from -20 ¡ãC to -150 ¡ãC and the inlet pressure of pump is less than 0.6 Mpa. MDG Boiler Feed Water Pump Features: 1) Stator parts of the MDG boiler feed water pump : It mainly consists of suction stage, mid-stage, discharge stage and diffuser; they are strained through a lever and form a working chamber. the inlet and the outlet are vertival upword. 2) Rotor parts of the MDG boiler feed water pump : It mainly consists of shaft, impeller, balance kettle and shaft sleeve. Shaft transfers power to impeller and make the pump work. The axial force is balanced by balance disc (kettle) and there is rechargeable shaft sleeve in shaft to protect shaft. 3) Bearing parts of the MDG boiler feed water pump: It mainly consists of bearing body, shaft cover and sliding bearing. There are two single centripetal ball bearing in bearing body to prevent balance disc (kettle) from abrasion. The sliding bearing is lubricated by dilute oil, there is cooling chamber in bearing body and the bearing can be cooled with exterior water. 4) Shaft seal parts of the MDG boiler feed water pump : Shaft seal uses soft packing seal. It mainly consists od seal box, packing, packing ring and packing cover. The shaft is sealed, cooled and lubricated by exterior water from seal chamber. The mechanical seal can also be used as requirement and it need be cooled, lubricated and washed by exterior water. 5) Drive: Type MDG boiler feed water pump is directly driven by motor through flexible coupling. View from motor end, the rotating direction of pump is clockwise. MDG Boiler Feed Water Pump Parameter Selection Table: Model Speed(r/min) Flow Head(m) Power(KW) NPSH (m) m3/h L/S Shaftpower Motorpower MDG6-25×3 2950 3.75 1.04 76.5 2.37 5.5 2.0 6.3 1.75 75 2.86 2.0 7.5 2.08 73.5 3.19 2.5 MDG6-25×4 2950 3.75 1.04 102 3.16 7.5 2.0 6.3 1.75 100 3.81 2.0 7.5 2.08 98 4.26 2.5 MDG6-25×5 2950 3.75 1.04 127.5 3.95 7.5 2.0 6.3 1.75 125 4.77 2.0 7.5 2.08 122.5 5.32 2.5 MDG6-25×6 2950 3.75 1.04 153 4.73 11 2.0 6.3 1.75 150 5.72 2.0 7.5 2.08 147 6.39 2.5 MDG6-25×7 2950 3.75 1.04 178.5 5.52 11 2.0 6.3 1.75 175 6.67 2.0 7.5 2.08 171.5 7.45 2.5 MDG6-25×8 2950 3.75 1.04 204 6.31 15 2.0 6.3 1.75 200 7.63 2.0 7.5 2.08 196 8.58 2.5 MDG6-25×9 2950 3.75 1.04 229.5 7.10 15 2.0 6.3 1.75 225 8.52 2.0 7.5 2.08 220.5 9058 2.5 MDG6-25×10 2950 3.75 1.04 255 7.89 18.5 2.0 6.3 1.75 250 9.53 2.0 7.5 2.08 245 10.63 2.5 MDG6-25×11 2950 3.75 1.04 280.5 8.68 18.5 2.0 6.3 1.75 275 10.5 2.0 7.5 2.08 269.5 11.71 2.5 MDG6-25×12 2950 3.75 1.04 306 9.47 18.5 2.0 6.3 1.75 300 11.44 2.0 7.5 2.08 294 12.78 2.5 MDG Boiler Feed Water Pump Application: This series boiler feed water pump is used for transport no solid particles contained water or Chemical and Physics water Boiler feed water and boiler circulation water High-rise building booster Urban Fire booster Long distance water transportation Boiler heating and cooling water circulation booster
Boiler Feed Water Pump (vertical)
