Led Rgb Controller

2.4G RF remote RGB led controller control LED source for LED strips 1.Product description This 4 zone 2.4G RF remote RGB led controller adopt the most advance PWM control technology, can control all kinds of 3 channel (common anode) LED lights. Such as LED module, led strip, led control box, led source, etc. This controller is with indicating light and power off memory function, next time to used it, will start with the model it save. Easy connection and simple to used is the representative advantages of this controller. User can choose different changing mode, adjust the speed and brightness, turn on/off by the remote control according to their preference. 2.Function introduction: 1. Use the 2.4G frequency RF remote control, no need to make the remote direct to the controller, and the RF remote can controlled it across obstacles. 2. In the open area remote control distance is about 30 meters. 3. Adopt the press key and touch wheel control remote, slightly touch the color wheel can adjust the lightâ??s brightness smoothly. Cautions 1,This products Input voltage is DC12-24V,other input voltage are not allowed. 2,Lead wire should be connected correctly,according to the wire color and the connecting diagram offers. 3,Overload are prohibited.

Description --Noe WiFi LED Controller based on web operation! --2021 MAXKGO brand new design, make your LED more dazzling! WiFi LED Controller MAXKGO Night Elf WiFi RGB LED Controller (hereinafter referred to as NELF) is an advanced smart LED controller. Using an real-time controller based on Web, you can control LED conveniently and interestingly, creating the desired scene atmosphere whenever and wherever you desired. The NELF can support APA102, WS2801, WS2811, WS2812, WS2813, WS2815 and other types of LED, and can support 2048 LED beads at the same time. Simultaneously, the NELF can upgrade the firmware online, so that your LED controller will always keep pace with the times. Designed for LED enthusiasts and novices Many LED enthusiasts have found that MAXKGO NELF's simple interface and easy-to-operating procedures can allow players to design LED easily without programming experience and coding skills . Let LED no longer be singular and boring, and truly achieve that life is more dazzling because of technology! The NELF comes with 50 modes, which can change the direction, color and speed of the LED running through real-time operation. All operations will be updated in time as you type, so there is no need too much time for waiting. In addition, the NELF can customize the WiFi name and create your own LED atmosphere creation expert as you like. The Advantages of MAXKGO NELF WiFi RGB LED Controller 1. Lightweight and mini, and not taking up space; 2. It can be used out of the box, and the operation is simple; 3. Two sizes can be chosen freely; 4. Power supply with Type-C interface conveniently; 5. The firmware can be upgraded online; 6. Customize the WiFi name to create an exclusive device; 7. Faster WiFi response and more sensitive web interface. Maybe you are also interested in Waterproof LED Strip Lights Specifications: Brand: MAXKGO Model: NELF V1 & NELF V1X Size: NELF V1: 11mm x 33.6mm NELF V1X: 34mm x 39mm Net Weight: NELF V1: 1.2g NELF V1X: 5.4g Voltage: 5V Language: English Memory: Built-in 50 LED run modes Suitable for: LED light strip Support LED: APA102, WS2801, WS2811, WS2812, WS2813, WS2815 type LED Color Mode: Support any RGB color sequence mode Control Distance: 30M Control Technology: WiFi Use Environment: indoor Speed Adjustment: The speed of light strip effect change is adjustable, and it can drive up to 2048 LED lamp beads User Button: Press to change the LED mode or restore the factory state Indicator Light: Indicate startup, setting and power status Power Connection: 1. If the LED strip is 5V, you can directly use the back feed from the LED; 2. If the LED strip is 12V, a 5V power supply must be provided separately for the night elf LED controller.

LED Light Strip Bullet point: • 100% RXMENT ORIGINAL - Designed by Rxment professional LED team. • COMPATIBILITY - Suitable for 5050/3528 LED RGB strips. • 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change. • 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. Input Voltage: 12V (Power supply is not included. You can use the 2A or 5A power supply to connect). • EXPENSIVE MATERIALS - We go above and beyond when it comes to material selection. We insist on using DOUBLE PCB Panel on RGB control box which can help prolong life and increase the signal reception sensitivity. Although this will cause higher costs while most RGB control box in the market only use single PCB Panel. The remote has a few functions and modes, and remembers it's previous setting when off. MODES: • SOLID COLOR: (Red, green, blue, white, orange, yellow, cyan, purple) with adjustable brightness. •JUMP 3: cycles between R, G, B. •JUMP 7: cycles between 7 colors (see solid above). • FADE 3: Fades between 3 (R,G,B) colors. •FADE 7: Fades between 7 colors (technically it looks like all the colors of the visible spectrum). •In solid mode, brightness can be adjusted. In jump and fade modes, speed can be adjusted from 4 second transition, to nearly strobe. Other notes: Only blinks through multiple colors, cannot flash or fade the same color. Brightness only changes solid colors, but becomes full brightness during color changing modes. The box has a wider range of speed control. It has to be right at the sensor within 20ft, no obstacles. Box, remote, and power adapt is interchangeable with other brands of this item. HOW TO USE DIY: 1. Press a DIY button, for example DIY1. 2. Hold one of the down colored arrows for about 8 seconds until you notice a change. Then try holding down another arrow. The DIYs start out as white because white is made up of RGB. The arrows essentially add or subtract color. 3. After you have the desired color, press the same DIY button again to save it. To cancel the change, press another DIY button instead. WATTAGE (one 16ft RGB strip): •White brightness min/max: 10 - 40 watts •Other colors/custom colors brightness min/max: 5 - 25 watts (Varies between colors) •Music modes - Fade and jump: 20-35 watts. Flash: 1-5watts. Package Content: •1 x Remote Controller •1 x RGB Control Box •1 x Controller Operation Instructions

1. Working voltage: dc7.5-24v 2. Output channel: can be used 3/2/1 channel 3. Output current: 4a*3 4. Connecting method: common anode 5. Dimension: l105.5*w45*h23mm 6. Remote distance: 50 meters indoor, 100 meters outdoor 7. Software: android system (at least version 2.3 with wifi function) or ios system, Language : english/chinese. 8. Receiver sensitivity: 802.11b dsss(-5dbm)£¬802.11b cck (-10dbm) 802.11g ofdm(-15dbm) 1. Working voltage: dc7.5-24v 2. Output channel: can be used 3/2/1 channel 3. Output current: 4a*3 4. Connecting method: common anode 5. Dimension: l105.5*w45*h23mm 6. Remote distance: 50 meters indoor, 100 meters outdoor 7. Software: android system (at least version 2.3 with wifi function) or ios system, Language : english/chinese. 8. Receiver sensitivity: 802.11b dsss(-5dbm)£¬802.11b cck (-10dbm)£¬ 802.11g ofdm(-15dbm) Dimension: l105.5*w45*h23mm

120¡ã Luminous flux: Rgb Weight: 52¡¨¤2g Base type: E27/e26/e14//gu10/b22 Color temperature: Rgb Net weight: 50g Number of colors: 16 millions Remote control distance: 10 meters max Synchronizability: Non-synchronizable Dimmerbility: Dimmerble by remote controller Dimm ability: Non-dimmable Warranty: 2 years warranty Temperature range: Ambient: -20¡ãc to 40¡ãc; surface of lamp: 60¡ãc to 70¡ãc Humidityt range: 0 to 95% non-condensing humidity Led lifespan: 50, 000 hours Certificates: Ce, rohs, fcc, pse

1) 2.5Amp per RGB channel 2) PWM signal for RGB lighting control 3) Input voltage DC10.5V~DC26V 4) Slim enclosure 5) USD software programming at option 80g

1> 256- levels brightness, 3 channels full- color control. 2> LCD screen for programing and showing the mode, speed, brightness, and pause astate. 3> Pre- saved 256 levels dimming mode, real- time shows the brightness. 4> Can select various change modes, power off memory function. 5> A variety of optional control scheme, covering ir, rf control function. 6> Do not blink while power-on. 7> High frequency output, low brightness without shaking. 8> Cooperating with the corresponding power repeater, can realize unlimited power expansion. 9> Slim appearance design, especially for european installation standard. Label button function: Mode Pause Spd Brt Test Parameter: 1> Input voltage: dc12v - dc24v 2> Max current load: 3*5a 3> Max output power: 180w(12v) / 360w(24v) 4> Load type: regular led(0.04 - 0.1w) 5> remote mode: rf / ir-24 / ir-44 6> Aproval: ce/ rohs 7> Remarks: remote control type can be selected. Neutral packing.

Sizes:84.5mm x 51.5mm x 7.25mm Keys: 28 Battery:AAA-3V Weight:21.59g Function: Single function Control distance: 15-20M Materials: ABS and PVC This is an IR remote control. It can also be made as a RF one for other devices.

Supplier: LED RGB controller, artnet controller, touch rf remote, LED dimmer, DMX512 decoder/driver, LED power repeater
Services: Transportation and shipping
Buyer: LED rgb controller, artnet controller , touch rf remote , led dimmer, DMX512 decoder/driver, LED power repeater