Flexible expansion joint with rubber flange
Flexibe expansion joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces.
Rubber flexible expansion joint has been successfully installed in tough demanding applications such as: chemical/petrochemical, marine, power generation, pulp/paper, steel mills and water/wastewater treatment.
Features and benefits:
1, versatile hand-built construction. Made in china
2, absorbs directional movement
3, absorbs vibration, noise and shock
4, compensates for misalignment
5, wide flowing arch design
6, virtually eliminates sediment buildup
7, higher pressure rating than conventional expansion joints
8, high vacuum rating (up to 30" hg) can be supplied for certain sizes
9, economical fully molded construction
10, solid galvanized steel floating flanges speed the installation time
Size
(dn50~200)
(dn250~1200)
Working pressure mpa
2
10
Explosion pressure mpa
>5
>2
Vacuum kpa(mmhg)
53.3(400)
44.9(350)
Temperature
-20--115 centigrade(for special requirements could reach to-30--250 centigrade )
Media
Air, compressed air, water, sea water
Heated water, oil, acid, alkali
Note:
1. Supply range can be up to dn3000, detailed data can be offered upon request.
2. Control units must be used when piping is not properly anchored.
3. The rated pressure 2.5mpa products will only be sold with control units.
4. Pressure rating is based on 30¡ãc operating temperature. The pressure rating is reduced at higher temperatures.
5. Weights in the above table are joints with din pn16 drilling retaining ring flanges.
Plastic bags, wooden box, or according to your demand
PTFE flexible rubber expansion joint Single Rubber Joint Pipe Expansion Joint 1. Acid resistance Flexible Rubber Joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. No. Part Meterial 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR, CR, IIR, NBR, FKM, EPDM, PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 Flange Cast and forged carbon steelStainless steelPlastic (CPVC, PVDF, PPH, UPVC, RPP) MAIN DATA Nominal Diameter(DN) Length L Axial displacement Horizontal Isplacement Angular deflection mm inch mm Extension Compression mm (a1+a2) 32 1¼ 95 6 9 9 15º 40 1½ 95 6 10 9 15º 50 2 105 7 10 10 15º 65 2½ 115 7 15 11 15º
China zhengzhou mason is china's largest manufacturer of rubber expansion joints of the best, our products are sold around the world. Our main products include rubber joints expansion joints, dismantling joints, steel expansion joints. Rubber joints are made of nbr rubber, ptfe rubber, epdm. The flange of rubber expansion joints can be made jis flange, din flange, ansi flange and bs4504 flange. Variety of materials rubber were applied to different media. Different materials of flanges are applicable to different working environment. Please choose according to their specific working environment. Wooden box
1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
ProductASME 165 ring joint flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating45 based on 28 reviews priceStart from 20 USD RFP India is one of the foremost Supplier and Manufacturers that offers high quality of Ring Joint Flanges These flanges are time and again used through their most significant benefit which is it can be used for unanticipated circumstances and in very changeable areas where welding is unsafe With dissimilar materials like Stainless steel Alloy steel and Carbon steel RFP India offer dissimilar types of Ring Joint Flanges such as SlipOn Threaded and Welding Neck amongst others Meanwhile these types of Flanges are also accessible in different sizes specification grades and thickness as per the needs of clients RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Ring Joint Flanges Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Ring Joint Flanges Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Ring Joint Flanges Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Ring Joint Flanges Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Ring Joint Flanges Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Ring Joint Flanges Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Ring Joint Flanges Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Ring Joint Flanges Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Ring Joint Flanges Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Ring Joint Flanges SS 310 310S Ring Joint Flanges Duplex Steel UNS S31803 Ring Joint Flanges Stainless Steel 304 304L Ring Joint Flanges Duplex Steel Ring Joint Flanges Stainless Steel 316 316L Ring Joint Flanges Duplex Steel UNS S32205 Ring Joint Flanges Stailess Steel 321 321H Ring Joint Flanges
ProductASME 165 lapjoint flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating42 based on 26 reviews priceStart from 20 USD RFP India is a determined manufacturer of high quality of industrial lap joint flanges in India It is very much similar to slipon flange where it is having a radius at the junction of the bore and flange face that is for to create a lap stub end In the meantime the look on the stub end forms out by means of the gasket face on the flange Lap Joint flanges are being used in applications where parts of the piping systems need to be taking away from each other quickly and easily for inspection and replacement These lap joint flanges are being provided in fullscale range and are extensively used at all the pressures RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Lap Joint Flanges Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Lap Joint Flanges Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Lap Joint Flanges Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Lap Joint Flanges Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Lap Joint Flanges Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Lap Joint Flanges Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Lap Joint Flanges Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Lap Joint Flanges Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Lap Joint Flanges Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Lap Joint Flanges SS 310 310S Lap Joint Flanges Duplex Steel UNS S31803 Lap Joint Flanges Stainless Steel 304 304L Lap Joint Flanges Duplex Steel Lap Joint Flanges Stainless Steel 316 316L Lap Joint Flanges Duplex Steel UNS S32205 Lap Joint Flanges Stailess Steel 321 321H Lap Joint Flanges Super Duplex UNS S327
We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
1, Product Information: ZHW rubber expansion joint is the most economical full-pressure elastomeric expansion joint. It is the standard moulded rubber flange expansion joints. As a standard, MX601 consists of high quality rubber body and floating flanges in zinc plated carbon steel. It allows for axial compression/extension, lateral deflection as well as angular movement. A variety of elastomers are available for cover and tube, offering superior resistance of chemical, aging and operating temperature from -30° to +250°F*. 2, Product Advantages: Length of product customization Tough quality and Widely Service Absorption of Vibration, Noise and Shock Wide Range of Flange Materials Available Reduced Turbulence or Material Entrapment Compensation for Misalignment 3, Product Applications: Due to the single sphere rubber joint has good comprehensive performance, so it is widely used in chemical industry, building, water supply, water drainage, oil, light and heavy industry, frozen, sanitary, plumbing, fire protection, electric power and other infrastructure, especially suitable for the vibration is larger, cold and hot pipes changes frequently.
