Cpe Impact Modifier

It is a kind of white solid powder obtained by high density polyethylene (hdpe). This product has good weatherability, oil resistance, ozone resistance, flame resistance and good histocompatibility with varied plastics and rubber. It can effectively improve toughness and impact resistance and anti-aging of rigid pvc products, to increasing pressurization rmance and weatherability 5: cpe impact modifier is superior compatibility with high polymers like pvc, pe and abs 6: cpe impact modifier is superior processibility 7: cpe impact modifier has high filling capacity Application : Cpe is widely used in various types of pvc door and window profiles, pipe materials, sheets guard rails, sidings, etc Specification: Item Unit Value Chlorine content % 35¡¨¤1 Heat of fusion J/g ¡¨¹2.0 Volatiles % ¡¨¹0.30 Sieve remainder(0.8mm sieve) % ¡¨¹2.0 Bulk density G/ml ¡y0.5 Impurity particles Pieces/200g ¡¨¹30 Shore hardness (a) ¡¨¹65 Time of stability Min.(65¡ãc) ¡y8 Tensile strength Mpa ¡y8.0 Elongation at break % ¡y600 Mooney viscosity Ml1+4125¡ãc - Melt index 190¡ãc, 21.6kg - Package: Plastic weaved bag with pe film inside, 25kg/650kg/1000kg supplied Plastic weaved bag with pe film inside, 25kg/650kg/1000kg supplied

Acrylic resin impact modifier ACR 1.Introduction Impact modifier ACR-IM product line is a new generation of core-shell acrylic copolymer, the core layer of glass temperature is -50 - 55 The series of impact modifier-impact modifier and processing to improve performance in one, to increase the products of weathering and surface gloss, anti-aging properties, especially suitable for outdoor use products, widely used in the profile, non-transparent sheet, plate , Pipe, PVC pipe, and other indoor and outdoor products. 2.Physicochemical properties Specification Item IM-10 IM-20 IM-30 Appearance White freely flowing powder Granularity (percent of pass at 20 mesh) % 98 Volatility% 1.2 Apparent densityg/ml 0.40-0.55 Core glass transition temperature -50 -48 -55 3.Characteristics (1)Excellent weatherability. (2)Excellent impact resistance (3)Excellent processability 4.Use direction IM-10 has a normal processing performance and high resistance to impact and the need to use a small amount of processing aid; IM-20 has a high processing performance and better impact resistance and, without the use of a processing aid; IM -30 Do not have the processing performance, but with excellent impact performance, need to use of processing aid. 5.Recommended dosage Product Profiles Pipes fittings Plates Recommended dosage 6-7 6-9 3-6 6-7 6.Storage, packaging, transport This product is packed in sealed plastic bags and then put into weave bags, the bags with product certification, packaging bags external annotated: trademarks, manufacture, product weight.

Supplier: PVC resin, PVC powder, PVC impact modifier, CPE impact modifier, processing aid ACR, PVC heat stabilizer, CACO3, TIO2, PE wax, stearic acid, CPVC resin

Product Description PVC Resin Polyvinyl Chloride Resin Formula: [-CH2-CHCl-] CAS: 9002-8a6-2 HS CODE: 39041010 Application:SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products. SG-5 used in producing PVC Profile, PVC Pipe, PVC Panel products. SG-8 is used in producing clear foil, hard injection molding. Specification: suspension grade Polyvinyl Chloride Resin SG3 SG5 SG8 GB5761-1993 Inspection item Guaranteed Value K value Viscosity number 72 71 135 - 127 68 66 118 - 107 59 55 86 - 73 Number of impurity particles 16 16 20 Volatile content (incl. water)% 0.30 0.40 0.40 Apparent density 0.45 0.45 0.48. 25kg/bag with a woven bag.

Supplier: CPE 135A, PVC additives, PVC impact modifier, CPE 135B, CPE 130A

Cpe36pv is mainly used as an impact modifier for rigid pvc. It is mainly used in pvc door and window profile, u-pvc drainage tube, water inlet, cold bending trough tube, pvc foam plate, pvc extruding plate and press plate, etc. 1.Introduction: 1). Pvc additives, pvc impact modifier 2). Good weatherability, oil resistance

1.Introduction: Cpe 130a is a kind of chlorinated polyethylene elastomer with high cold-resistance and high filling level. Cpe 130a can be used for magnetic tapes for the refrigerators/freezers and other rubber products. It can also used as modifier or solubilizing agent for non-polar rubber, such as epdm etc. 1). High toughness at low temperature 2). High magnetic filling volume 3) excellent electrical performance resistance cold 4). We are manufactruer 5). High quality 2. Specifications: 1)chlorine %: 30 1 2)fusion heat j / g, %, : 5.0 3)sieve residue (0.9mm sieve) %, 2.0 4) colored particles, 10 5)shore hardness shore a, 70 6) tensile strength, 8.0 Packing: Pp woven bag. Net wt 25kg, 500kg or 600kg.

Cpe140b is mainly used as a modifier or as a plasticizer in soft ( flexible )pvc applications. It can be used in mining and cable sheathing, oil hose, tape and other areas. 1Excellent resistance to flam and oil 2Excellent resistance to weather 3We are manufacturer 4 High quality 2. Specifications: 1) chlorine %: 402 2) fusion heat j / g, %, : 2.0 3)sieve residue (0.9mm sieve) %, / 4) colored particles, / 5) shore hardness shore a, 65 6)tensile strength 6.0 7) mooney viscosity,120 Packing: Pp woven bag. Net wt 25kg, 500kg or 600kg.

Supplier: PVC resin, CPVC resin, PVC heat stabilizer, PVC compound, CPE impact modifier, processing aid ACR, tribasic lead sulfate, dibasic lead sulfate, TBLS, DBLS, calcium stearate, zinc stearate, lead stearate, CACO3