Rfid Module

Model ak-rfm004 This 4 antenna port uhf rfid module is equipped with impinj r2000 chip, it could work in long range reading uhf rfid Reader. We could provide api customer port, and standard sdk. It will help you develop the right rfid device to meet whole System quickly. Specification: Size: 69mm x 43mm x 10.50mm (l*w*h) Weight: 50g Power consumption: 1.5a peak Working tempreture: from -20 Stocking tempreture: from -40 Physical port: 1 x mmcx, rf connector, 15pin connector(electricy source, communication, gpio) Working frequency: ultra high frequency (840-960mhz), defauty frequency (920-925mhz), the frequency could be customized for different country. Click to make an enquiry 50g/pc

Key features: 3.3v ~5v power supply, uart-ttl interface; Tiny size, single-face laying components with stamp-hole Compliant with iso14443a/b, iso15693, iso18092 standard Support iso7816 standard psam/cpu card; Read/write or read uid only working mode Support to create standard data file, back-up data file, value file, linear record file, cyclic record file and transaction mac file) Support key authenticate, get key version, change key, etc; Available to operate desfire picc level, application id create/delete/format, etc Support for standardized encryption algorithms (des, 3des, and aes, mac), etc External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current

Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe

Key features: 3.3v ~5v power supply, uart-ttl interface; Tiny size, single-face laying components with stamp-hole Compliant with iso14443a/b, iso15693, iso18092 standard Support iso7816 standard psam/cpu card; Read/write or read uid only working mode Support to create standard data file, back-up data file, value file, linear record file, cyclic record file and transaction mac file) Support key authenticate, get key version, change key, etc; Available to operate desfire picc level, application id create/delete/format, etc Support for standardized encryption algorithms (des, 3des, and aes, mac), etc External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current�?

JMY6281 is based on NXP PN512, CV520 chip design. It supports USB HID, UART or IIC interface and fully compatible with ISO14443 Type A, ISO14443 Type B protocols and also NFC function. The dimension is 50.8mm * 50.8mm * 7.5mm.

Jmy601 is based on nxp mf rc531, sl rc400, or cl rc632 chip design. It supports uart or iic interface and fully compatible with iso14443 type a and iso14443 type b and iso15693 protocols. The dimension is 60mm * 60mm * 5.7mm. Description Jmy601 is a series of rfid read/write module with uart or iic communication port. It has various functions and supports multi iso/iec standard of contactless card. The rf protocol is complex, but the designer combined some frequent used command of rf card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between rf circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main characteristics Modules integrated antenna, excellent consistency and stability light and slim rf protocol in accordance with emv2010 Qualifications Pcd: nxp mf rc531, sl rc400, cl rc632 Pcb layers4 Working frequency: 13.56mhz Termsed standard: iso14443a, iso14443b, iso15693 anti collision ability: full function anti collision; be able to set multi-cards or single card auto detecting card: termsed, default off, could be set

JMY6021 is based on NXP MF RC500, MF RC531, SL RC400 or CL RC632 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693, and ISO7816(2 SAM Slots) protocols. The dimension is 100mm * 70mm * 10.6mm

JMY6122 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(4 SAM Slots) protocols. Also it supports NFC functions. The dimension is 86.5mm * 65mm * 9.5mm.

JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the modules performance and stability.