The King Pigeon S Serial GSM GPRS RTU Telemetry Data Logger equipped Siemens MC55i quad-band GPRS Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
The King Pigeon S220 GPRS RTU Telemetry Data Logger equipped Siemens MC55i quad-band GPRS Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
Supplier: Data acquisition board, anti uav defense system, rf & microwave products
ZY-JKFZ-EIM100/0 Omnidirectional Jammer adopts omnidirectional antenna combination to block and interfere with the reception and processing of UAV's figure transmission, remote control and navigation signals within a range of 360, so as to achieve countermeasures such as forced course reversal, forced landing and drive away, so as to quickly and effectively dispose suspicious UAV. 1. For anti-UAV, forced landing and drive mode are adopted 2. Manual \ automatic adjustment of strike frequency band and power 3. Flexible customized interference mode, automatic start and stop 4. The electronic map shows the working status and strike area in real time 5. Guided by UAV radar, UAV Radio Monitoring Equipment, Optoelectronic Device and other equipment 6. Equipment self-check, abnormal report 7. Standard interfaces and protocols for secondary development components Product Parameters Interference intervention distance: 0.6km1km Control pitch Angle: 16 Azimuth coverage (horizontal): 360 Interference beam width: 1550~1620MHz; 2400~2485MHz; 5720~5870MHz(Other frequency bands can be customized) Antenna gain: 1550~1620MHz 6Db; 2400~2485MHz 5720~5870MHz 8db Interference time: 1s Interference type: Narrow band noise interference, broadband noise interference, frequency sweep noise interference Control interface: Network/serial port Weight: 20Kg (standard frequency band) Power supply: AC220V/50Hz Equipment power: 950W (All frequencies) Physical Features Working Temperature: -30-55 Storage Temperature: -40~60 General Specification Dimensions (LWH): 480mm155mm340mm Protection grade: IP66
1.Multi-band and all-band scanning to detect drones 2.Support urban mode, suburban mode, base station mode and other complex environment application mode 3.Interference linkage 4.Create a black and white list identifying WIFI type drones 5.Passive detection, GPS positioning, automatic north calibration, unattended 6.Equipment self-inspection, historical data return visit 7.No high-power electromagnetic radiation in the system. Strong concealment. No interference to environment and human body 8.Small and light, suitable for portable Product Description ZY-JKFZ-RAD001 UAV Radio Monitoring Equipment can realize real-time search, detection and alarm for UAV data transmission and measurement and control signals, and has parameters for UAV data transmission and measurement and control signals. This radio frequency drone detection has the functions of measurement, single-station direction finding and rough ranging. Combined with the identification database, it can identify the model of UAV and the manufacturer. At the same time, this drone detection device can also locate and continuously track the UAV, and display its position and track in real time on the map. ZY-JKFZ-3010A UAV Radio Monitoring Equipment is composed of passive detection antenna array, signal processing equipment and control terminal which can implement automatic real-time passive, no dead angle, zero interference detection and advance warning. According to different equipment hardware and software configuration, there are 4 product series with detection distance not less than 500m\2km \5km\9km provided, and the detection distance of network can be extended indefinitely. Furthermore it has been added new Al intelligent algorithm with unknown UAV detection capability.
ZY-JKFZ-2000C portable reconnaissance and strike integrated system adopts a body, miniaturized design consisting of the antenna array, signal processing equipment, control terminal and so on. Including automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, identification of friend and foe, it also can identify the only electronic fingerprint of the same brand and model UAV. Using narrow band and low power for precise strike, it can carry out omnibearing defense and take over multiple UAVs. Furthermore, it can be easy to carry and fast to deploy. Product Parameters Frequency range 70MHz~6000MHz Reconnaissance distance. 3km Strike distance.... 1.5km Reconnaissance sensitivityover -95dbm (25kHz) Reconnaissance airspace.... 360°the whole airspace Power supply.. power, oil generator, battery Built-in battery life....4 hours Operating temperature.. -40°C~+70° Dimension... 57cm X 25cm X35cm
Product Description ZY-JKFZ-2000A fixed reconnaissance strike integrated system consists of antenna array, information processing equipment, commanding terminal and so on. It is capable of automatic real-time passive detection, no dead Angle, zero interference detection, early warning, accurate identification, and identification of friend and foe, and can identify the only electronic fingerprint of the same brand and model UAV. Adopting narrow band and low power for precise strike, it can fully defend and take over multiple UAVs. Product Parameters Frequency range 70MHz~6000MHz Reconnaissance distance. 9km/5km/3km Strike distance.... 3km/2km Reconnaissance sensitivityover -95dbm (25kHz) Reconnaissance airspace.... 360°the whole airspace Protection class.. IP65 Connection mode... wired connection (network or optical cable) Operating temperature.. -40°C~+70° Power supply.. C12V Dimension... 42cm X 18cm X 46cm
Supplier: Intelligent lockers, RFID based solution, handheld computers, data acquisition & controlling system, GPS based solutions
Model:M120d Name:DeviceNet Remote IO Module (4DI+4DO+4AI+2AO) The M120d DeviceNet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, provides a CANBus interface. It provides multi I/O, supports standard DeviceNet Protocol, can be intergraded into SCADA, OPC server, HMI and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. The M120d DeviceNet Remote I/O Module provides 4 optical-isolated digital inputs,DI1 supports max. 1MHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 4 digital outputs, DO1 supports 10Hz~300KHz PWM high speed pulse output, or relay outputs, 2 channel 12bits analog outputs, supports 0~10VDC signal output. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. Features: u Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; u Wide range power supply 24 ~ 36VDC with over voltage and phase-reversal protection; u 1 CANBUS Interface, comply with DeviceNet specification Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5; u Group 2 Only Server (non UCMM-capable) ; u Support Predefined Master/Slave Connection Set; u Support DeviceNet heartbeat and shutdown messages; u Provide EDS file for standard DeviceNet master interface; u 4 optical isolated digital input, supports max. 1MHz high speed pulse counter; u 4 digital output or relay output, supports 10Hz~300KHz high speed pulse output; uDO1 support PWM output; u 4 isolated analog input, 12-bit resolution, supports 0~20mA, 4~20mA, 0-5VDC, 0-10VDC; u 2 analog output, 12-bit resolution, supports 0-10VDC; u High sampling frequency and special filtering strategy to ensure reliability; u Provides 1 channel 24~36VDC power source output for external device, saving wiring cost; u LED instructions work status, with reset button to reset, easy on-site installation and commissioning; u Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; u Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
Model:S253(For Transformer) Name: 3-Phase Electric Measuring Transformer Monitoring and Alarm Remotely The Cellular(GSM/GPRS/3G/4G/NB-IoT) 3-Phase Electric Measuring RTU is special designed for remote monitoring transformer, and measuring the 3-phase 3-wire, 3-phase 4-wire distribution power voltage, current, factor, watts, frequency, active power, reactive power, when overload or loss phase or exceed the pre-set value, then it will alert by SMS, Voice call, Cloud, APP, Wechat, Web Server, SCADA, HMI, DSC immediately. The Cellular 3-Phase Electric Measuring RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, integrated special measurement chip and inbuilt industrial Cellular module. It provides 4 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity. The Cellular 3-Phase Electric Measuring RTU also can be used for monitoring the safety and security of the transformer, e.g. overload, phase loss, oil temperature, oil level, burglarproof, fall down etc. The Cellular 3-Phase Electric Measuring RTU can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically. Mainly Features: 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM® Cortex�-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 12~36VDC with over voltage and phase-reversal protection; 7. Measurement range: 3-Phase 3-Wire, 3-Phase 4-wire, frequency: 45~65Hz, voltage: 500V, current 5A, 10A; 8. 4 digital inputs, compatibles dry and wet contact; 9. 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs; 10. 1 ambient sensor input for monitoring onsite temperature and humidity; 11. Provide additional 4 analog inputs, compatibles 4~20mA or 0~5V, can be change to PT100 temperature probe to measure the oil level or oil temperature ;( Optional) 12. Supports phase loss, phase recovery, voltage overload, current overload detection and alarm; 13. Inbuilt inter-lock logic programmer and powerful timer program function; 14. Resend the data while communication failure and alert to users by SMS; 15. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications and so on.