Non-Rising Stem Gate Valves Bs5163

Non -rising Stem Gate Valve (DGV01-TF01) Nominal Diameter: DN40-DN1200 Nominal Pressure: PN1.0/1.6MPa End Standard: EN ISO GB BS DIN HG JB SANS GOST KSB JIS AS ASME Design: BS5163 AWWA C509 Face to Face: B$5163 ASME B16.10 AWWA C509 16 GB/T12221 Testing: EN12266-1 APl598

* The SQK Rising Stem Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements

Rising Stem Gate Valve has threads on the outside of the valve body. The gate stem moves up when the valve opens. Rising stem valves are usually made of cast or forged steel, while non-rising stem valves are more commonly brass, bronze or cast iron. This way you can visually track how open the valve is. For a rising stem gate valve, it is easy to tell whether the valve is open or closed by looking at the exposure of the valve stem. If the handle is flush with the pipe (no stem exposed), the valve is closed. The valve opens if a large amount of the stem is exposed Rising stem gate valve is characterised as having either a rising or a non-rising stem and are produced at HY Valves according to Korea standard KS B2350, and it can also according to DIN 3204 and DIN 3216 standards. Rising stem provides a visual indication of valve position. Non-rising stem gate valves are used where vertical space is limited. Rising stem gate valve must be used as fully open or fully closed position where the vibration does not exist in the system. As they are designed as this purpose gate valves are not suited for regulating flow.

Rising Stem Gate Valve has threads on the outside of the valve body. The gate stem moves up when the valve opens. Rising stem valves are usually made of cast or forged steel, while non-rising stem valves are more commonly brass, bronze or cast iron. This way you can visually track how open the valve is. For a rising stem gate valve, it is easy to tell whether the valve is open or closed by looking at the exposure of the valve stem. If the handle is flush with the pipe (no stem exposed), the valve is closed. The valve opens if a large amount of the stem is exposed Rising stem gate valve is characterised as having either a rising or a non-rising stem and are produced at HY Valves according to Korea standard KS B2350, and it can also according to DIN 3204 and DIN 3216 standards. Rising stem provides a visual indication of valve position. Non-rising stem gate valves are used where vertical space is limited. Rising stem gate valve must be used as fully open or fully closed position where the vibration does not exist in the system. As they are designed as this purpose gate valves are not suited for regulating flow.

Supplier: Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products.
Services: Import and export