Monel400(UNS N04400/W.Nr. 2.4360)
Alloy400 is a solid-solution alloy that can be hardened only cold working.
It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.
Chemical Composition(%)
Ni(plus Cobalt)................63.0
C..............................0.3
Mn.............................2.0
Fe.............................2.5
S............................0.024
Si.............................0.5
Cu..........................28.0-34.0
Physical Constants(room temperature):
Density,(g/cm3)8.80
Melting Range1300-1350
Specific Heat,(J/kg) 427
Electrical Resistivity,(m) 0.511.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Monel400 stainless steel pipe Standard Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249) Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2 Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3 Drinking water tube: GB / T 19228 Mechanical tube: ASTM A554, EN 10296-2 Size Outer Diameter Range: 9.5~2000mm Thickness Range: 0.5~20mm (Size can be customized.) Length: Up to 11.8 meters per piece. Shape Section Round, square, rectangular Application Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on; Heat exchanger tube: condenser, boiler, super heater, evaporator and so on; Industrial pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on; Mechanical tube: handrail, railings, balustrade, hence and so on. Features: 1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3 m. 2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing. 3. Thick welding, good appearance.The mechanical properties of tube could be tested. 4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015. 5. Full material traceability is guaranteed during the manufacturing process. 6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness. 7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
.(Shanghai Yousteel Group Co.,Limited.)are the technical cooperation company of Shanghai No.5 Steel and Shanghai Iron & Steel research institute. We mainly in manufacturing and selling stainless steel and nickel alloy steel. Factory has full sets of production line. We can supply pipes, tubes, rods, plates, forgings, flanges, fittings, wires and so on. We are ISO9001:2008 certificated. We adhere to the principle of "being honest and faithful, increase the quality of products." and the advantage of "full kinds, full specifications, good price, high quality and good service". We have set up good business relationship with America,Germany, France, England, Japan, and so on. Our products are widely used in industries of oil, chemical, electricity,food, machinery, nuclear power, spaceflight, war industry, medicine, construction etc and are highly appreciated by our domestic and abroad customers. Steel Grade: 1.Wrought Superalloy£º GH1015, GH1016, GH1035, GH1040, GH1131, GH1140, GH2018, GH2036, GH2038, GH2130, GH2132, GH2135, GH2136, GH2302, GH3030, GH3039, GH3044, GH3128, GH4033, GH4037, GH4043, GH4049, GH4133, GH4169. 2.Hastelloy Alloy£ºHastelloy B, Hastelloy B-2, Hastelloy B-3, Hastelloy C, Hastelloy C-4, Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy G-30, Hastelloy G-35, Hastelloy N, Hastelloy S, Hastelloy W, Hastelloy X. 3.Inconel Alloy£ºInconel 600, Inconel 601, Inconel 601GC, Inconel 617, Inconel 622, Inconel 625, Inconel 625LCF, Inconel 671, Inconel 672, Inconel 686, Inconel 690, Inconel 706, Inconel 718, Inconel 718SPF, Inconel 725, Inconel X-750, Inconel 751, Inconel 754, Inconel 758, Inconel 783. 4.Incoloy Alloy£ºIncoloy DS, Incoloy 800, Incoloy 800H, Incoloy 802, Incoloy 803, Incoloy 804, Incoloy 825, Incoloy 903, Incoloy 907, Incoloy 909, Incoloy 925, Incoloy MA956, Incoloy A-286, Incoloy 25-6Mo. 5.Monel Alloy£º Monel 400, Monel R-405, Monel 450, Monel K-500, Monel S. 6.Special Steel£º904L, 2205, 2507, Carpenter 20Cb3, 309S, 310S, 310Si, 316LMod, 316Ti, 317LMod, 347, 347H, 329, S21800, 254SMO, AL-6XN, 20Mo-6, 17-4PH, 17-7PH, 15-5PH, 410, 420, 430. 7.Corrosion Resistant Alloy£ºNS111, NS112, NS142, NS143, NS312, NS313, NS315, NS321, NS322, NS333, NS334, NS335, NS336. wooden packing. astm
Grades : Monel 400, Monel k500 Range : 5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length Standard: ASTM / ASME SB 164
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe; Monel alloy 400 flat; Monel alloy 400 bar GB: NS111 ;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydrochloric acid equipment
Name OEM ODM Customized precision Monel 400 K500 flange High quality flange Stainless steel flange Specification According to customers' requirements Material Stainless steel 303/304/316, Carbon Steel, Brass, Bronze, Aluminum, Titanium, Alloy Standard ISO,GB,JIS,BS,ANSI,DIN Category Connector, nut, etc Dlivery 15-30� day
Standard ASTM B164 / ASME SB164 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
1.Detailed Product Description: 1.High Quality and the best service ; 2.Cheapest Price ; 3.Many lines for making ; 4.Verious size of Product. 2.Specifications: Deformed bars/reinforced bars: 1.Material:GB--HRB400/HRB500 ; BS4449--460B/500B; ASTM A615-Gr40/60 ; AS4671--500N/500E; JISG3112--SD400 ; DIN488-1--BST500S; KS-SD390. 2.Standard.:ASTM/JIS/DIN/BS/GB; 3.Diameter:6-50mm. 4.Package: 1 U Shaped folded Bundles A U Shaped Once Folded in Bundles B Each Bundle about 2 Metric Tons C Lengths ranging 12 Meters D Ends tied up with High Tensile Wires for maximum safety, lifting and transportation 2 Unfolded / Straight Bundles A Unfolded / Straight in Bundles B Each Bundle weighing about 2 Metric Tons C Lengths ranging from 1 Meters upto 12 Meters D Ends tied up with High Tensile Wires for maximum safety, lifting and transportation 3 Rounded Coils A 2 Metric Ton Coils for Bending / Cutting Machine use B Each Bundle weighing 2 Metric Tons C Well tied up with High Tensile Wires for maximum safety, lifting and transportation
Alloy K500 is a precipitation hardened nickel-copper alloy that combines the excellent corrosion resistance of 400 alloy with higher strength and hardness and outperforms other nickel-copper alloys. Adding titanium and aluminum elements, the tensile strength of K500 is doubled to 400 alloy, and the yield strength is three times that of 400 alloy. Monel K500 application area Chemical processing industry Maritime engineering Oil and gas extraction Parts manufactured by Monelk500: Centrifugal pump Oil and gas extraction equipment parts transmission shaft Pump shaft spring Valve and valve parts
