1. Different sizes are available to provide you with wide-ranging applications.
2. Be applied to those utensils that will become more convenient if they are attached with the function of rotation.
3. Place your LCD Monitor, TV, telephone, plant or flowerpot¡K on it.
4. Use it as a pottery stand when you want to color your plastic models.
5. As a dressing desk, a cosmetics desk or being to collect detergents.
4. Thickness: 2cm
5. Anti-slide function.
Parameter Unit : Q3512 Q3518 Q3525B
The diameter of revolving table mm : §¶1200 §¶1800 §¶2500
The maximum weight kg : 500 800 100
Cleaning workpieces size mm : 3-5 800 150
QR3210 : 1.5-2.5 600 30.
Product DescriptionTurning PTFE Board is commonly known as plastic King, F4, or Teflon. The suspension PTFE resin can be made into sheet metal, turning film and tube by molding. Can be pressed to push the molding. can be mixed with graphite, such as plate, rod, packing, rope, raw materials belt.APPLICATION:Seals/washers, ring materials, wear-resistant plate/seat power, insulating parts, anti-corrosion industry, mechanical parts, lining, oil and natural gas, petrochemical industry, Chemical industry, instrument and equipment manufacturers.Product Specificationlength*widthThickness mmNominal Tolerance150*150 mm0.3-100 mm±0.3~±0.5250*250 mm0.3-100 mm±0.3~±0.5300*300 mm0.3-100 mm±0.3~±0.5500*500 mm0.3-100 mm±0.3~±0.5600*600 mm0.3-100 mm±0.3~±0.5700*700 mm0.3-100 mm±0.3~±0.5800*800 mm0.3-100 mm±0.3~±0.51000*1000mm0.3-100 mm±0.3~±0.51200*1200mm0.3-100 mm±0.3~±0.51500*1500mm0.3-100 mm±0.3~±0.52000mm*2000mm0.3-100 mm±0.3~±0.5We can customize the product according to the customer's requirement.Details of PTFE filled with other materialsFilled materialsCommon filled ratio (Quantity %)Main performances Bronze40, 60Increases hardness and wear resistance; Increases dimensional stability and compressive strength;Carbon5, 10, 15Increases compressive strength, hardness, wear, and load properties. Good chemical resistance;Improves electrical properties.Graphite5, 10, 15Improves the deformation under load; Reduces initial wear; Improves thermal and eletrical conductivityGlass Fiber10, 15, 25Increases compressive strength, rigidity and wear. Reduces creep and cold flow; Improve Dimensional Stability.Carbon Fiber10 , 15, 25Increases compressive strength, hardness, wear, and load properties. Reduces creep and cold flowPOB (polyphenyl ester)5, 10, 15Improve the lubrication performance;Enhance the mechanical strength;Increase using temperatureBaSO45, 10, 15Increases compressive strength, hardness and wear resistance Reduces creepSiO25, 10, 15Increases hardness and wear resistance; Improve Dimensional Stability.Glass beads5, 10, 15Reduces creep and cold flow;Lower density Increases hardness and wear resistance;Others materialsPEEK(polyetheretherketone), PI(Polyimide), MoS2 are also okRemarksSome materials have similar enhancement effect, but degrees of enhancement are different. And they have different prices. More details please contact us.Product PackagingPacked by plastic bags,put into Plywood cases that don't need fumigation. Other packing is customized according to client's requirements.Company Profile
We are manufacturer, supplier & exporter of vast variety of forged turned parts. These parts are designed and made to perfection under the guidance of sedulous professionals.
Also, we employee Advanced Techniques, While manufacturing these products.
The clients can avail those products in variety of dimensions, grades and specifications.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
