High quality cam available for .... - weaving looms like sulzer , tsudakoma , picanol , somet , dornier , vama tex etc. - any circular looms - for twisting machine , t.F.O - any winding machine , cone winding machine - for texturising machine
Top-mounted positive shedding device NP4421 is characterized by more lifting units, large shedding amount, frame box of integral structure, strong rigidity, wide weaving patterns. Itâ??s especially suitable for double-warp looms that produce wide and heavy home textiles. Technical Parameters Reed Space: 1900mm~3600mm Max. RPM: 600rpm (4/1 weave, 1900 mmï¼? Weft picks: 12 picks Pitch: 12mm Max. Lifting Units: 16 pcs Heddle: 330mm Shedding Amount: 56mm~130mm
Top-mounted high-speed positive cam shedding device NPA408C is suitable for all types of air-jet looms. It can weave various fabric types that within 10 weft picks. The design of high-precision conjugated cams is incorporated into this device. The conjugated cams control the heald frames to move precisely according to given motion law through connecting parts, and keep them moving up and down smoothly even when loom runs at high speed. The cam box is fully enclosed and lubricated via oil bath inside. Double-side sealed bearings are used for all the connecting parts outside of frame box. Lever arm shaft and lever arm are joint with needle bearing, which is lubricated with grease to guarantee the service life. Technical Parameters Reed Space: 1400mm~4600mm Weft picks: 10picks Max. Lifting Units: 10 pcs Heddle: 280mm Shedding Amount: 55mm~126mm
Supplier: Garment CAD & CAM, apparel style design software, garment CAD software, digitizer, ink plotter, pen plotter, cutting plotter, sprrading machine, auto fabric cutter
4-Shuttle Plane Cam Type Circular Loom 1.Plane cam and connecting rod rolling wheel transmission which is the most advanced technology is adopted, making it easy and stable to run. 2.Rolling transmission is adopted in entire structrue instead of slide block and slide rod, which doesní»t need lubricant and decreases the wearing part. 3.Ití»s an environmental product whose noise is not more than 82dB(A). 4.Low strength plastic yarn which is made from 100% regenerated plastic can be adopted to weave. 5.It is high-efficient and energy economical. The highest rotation speed of the main motor can reach 180r/min and the power is 1.5/2.2kw, which can save 10 thousand.
Six-shuttle plane cam circular loom 1.Plane cam and connecting rod rolling wheel transmission which is the most advanced technology is adopted, making it easy and stable to run. 2.Rolling transmission is adopted in entire structrue instead of slide block and slide rod, which doesní»t need lubricant and decreases the wearing part. 3.It can be configured with automatically stop detecting unit when meeting the situation of warp/weft breakingíóweft ending. The stoppage unit is sensitive and reliable. 4.Plc centralized control is adopted for electric controlling , as well , frequency speed regulation which is convenient and stable is adopted. 5.It is high-efficient and energy economical. The highest rotation speed of the main motor can reach 180r/min and the power is 3kw, which can save 10 thousand degree electricity compared with the traditional small-sized six shuttle circular loom which power is 4kw. 6.As required, electronic intelligent fabric-fitting unit can be configured as well which is featured with the compensation setting to the warp/weft density casually.
Our positive conjugated cam shedding devices have been widely applied to various water-jet looms, air-jet looms, rapier looms and so on. They are capable of weaving plain, twist, satin as well as other fabric weaves within 12 weft picks; 147 patterns have been developed for them; stoppage angle can be designed based on respective process requirements of different fabrics. Our devices, with the advantages of fast speed, high efficiency, energy saving and low maintenance cost, are more suitable to wide and heavy fabrics compared with plain looms and other dobby shedding devices. Top-mounted high speed cam shedding device NPW408C is especially applied to high-speed water-jet loom. Its cam box assembly adopts integral structure, with the property of strong rigidity, high manufacturing precision and excellent conjugacy. The device is equipped with U-shape steel beam and fully enclosed cover, which reinforces strength, safety as well as anti-corrosion performance and extends the service life of parts effectively. It can meet the weaving requirement of high speed and heavy duty fabric. More than 10 thousand sets are used by Jiangsu Hengli Group and Taiwan Hualon Group respectively. It's the first choice of Tsudakoma and Toyota as complementary product of their looms. Technical Parameters: Reed Space 1700mm~3600mm Max. RPM 900rpm (4/1 weave, 1900mm) Weft Picks 10 picks Pitch 14mm Max. Lifting Units 10 pcs Heddle 280mm Shedding Amount 54mm~110mm
SLX 5376 cam type jacquard machine are in strict material selection and production process perfect balance of moving parts, conjugate cam oil bath lubrication, all bearings permanent lubrication to ensure wear resistance, long service time, maintenance work will be reduced to the minimum, coaxial system driven by conjugate cam. Further strengthened drives and sturdy base of this electronic jacquard weaving looms make the machine to withstand higher loads. This computerized jacquard machine is suitable for various of weaving looms, such as rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom. It is applicable to rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom with any reed width. This model of cam type electronic jacquard machine is used to weave label, tie, upholstery fabric, curtain fabric, shading fabric, sofa cloth, bedding cloth, towel, carpet, velvet, garment fabric, sari fabric, silk fabric, lining fabric etc. Hooks 5376/ Shed Opening 55-120mm/Max Speed 750 rpm/ Advantageous Features 1. Sealed fuselage, optimized filtration and ventilation system of our cam type digital jacquard machines can effectively prevent flying flowers into the system. 2. The optimized shuttle opening keeps good effect. The opening curve can be designed according to the need to ensure the best weft insertion, reduce the tension on warp yarn and breaks. 3. The self-locking characteristic of the conjugate CAM can reduce the interference to the braking performance of the loom. 4. The concentrated lubrication oil hole and grease hole are easy to reach and check. 5. The small pull rod composite bearing with special filling hole, to ensure the longer service time.
Supplier: Textile machinery like automatic fabric cutting machine, automatic fabric spreading machine, automatic garment pattern cutter machine, laser fabric cutting machine and apparel cad software
Services:
