Solar Led Road Studs

1.Power Supply: Solar Cell(monocrystalline silicon )2.5V/120MA 2.Power storage: NI-MH Battery 1.2V/800MAH 3.Working Time: Under the normal light intensity,it can work over 72h when it basked for 8h. 4.Aluminum alloy body with high resist compression >10 tons 5 Display: bright anti-fog LED, color can be customized 6.working mode: flashing (2Hz + 20%) and steady light 7.Luminance:front light < 500Lux 8.View distance: > 500m 9.Work Life: > 3 years. 10.Work temperature: -20+70 degree centigrade 11.Waterproof : IP68

Supplier: Solar road studs, LED traffic light, solar traffic sign, road safety product
Services: OEM

YT self-luminous ABS plastic reflective road stud with Nano-fluorescent material Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF06 Product name YT self-luminous ABS plastic reflective road stud with Nano-fluorescent material Material ABS+reflective film+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 100mmÃ?100mmÃ?10mm Weight 112g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF06 (1)_.jpgYF06 (2)_.jpgYF06 (3)_.jpgYF06 (4)_.jpgYF06 (5)_.jpgYF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.

Factory saqure self-luminous road stud delineator with reflective panels Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF08 Product name Factory saqure self-luminous road stud delineator with reflective panels Material ABS+self luminous Color white/ yellow/ red/ green/ black Size 100mmÃ?100mmÃ?20mm Weight 133g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF08 (1)YF08 (1)YF08 (1)_.jpgYF08 (2)_.jpgYF08 (3)_.jpgYF08 (5)_.jpgYF08 (6)_.jpgYF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.

Hangzhou YT Self-illuminating ABS road stud d with strong visibility Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF22 Product name Hangzhou YT Self-illuminating ABS road stud d with strong visibility Material ABS+PMMA+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 100mmÃ?100mmÃ?20mm Weight 145g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF22 (2)_YF22 (3)YF22 (4)YF22 (3)YF22 (6)YF22 (2)YF22 (1)YF self-luminating series table of brightnessYetong road studplastic road stud_application

360 Degrees Solar Photoelectric Road Mark Model: PCB-001/PCB-002 Patent No.: ZL2009 2 0175906.1 Product features: Brand: Cityeye Power supply: 3V 315Mw PCB-001-flash/3V 480Mw PCB-002-constant , solar cells (single crystal silicon) Energy storage device: 2*1.2v/1200mAH NI-Mh high Temperature rechargeable battery Service time: Under the positive standard light intensity it is able to work for>160h(flash)/>60h(constant)Consecutively after it is charged for 8h in a single pass Display mode: 360 degree warning,Flashing (1.33HZ 5%) and constant a Display color: Red,Yellow, Blue, White and Green Displayer element: Piranha ultra bright mist-resistant LED 3500~14000 MCD Body material: slip-proof extra strength plastic PC,bottom side package by polyepoxide,resist corrosion of wateroilCCl4UVand chemical substances Visual distance: 300 M Valid Service life: 5 years Protection level: 100% waterproof Operating environment: -20~ +70ìNi-Mh-40~ +85ìsuper capacitor Start control light intensity: light illumination less than 50 Lux from the positive side Specification: 100 Diameter * 58.5 High * Cateye Diameter 60 * Pavement elevation 19mm Anti-pressure capability: static pressure 35tafter contruction,resist impact by automobile wheels Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn Weight: 343 g/pcs Net weight: 36.4 Kg Gross weight: 38.0 Kg Warranty : 14 months Superiority: Green energy saving,ease of installation, does not destroy the landscape, roads and walls can be construction,warm brightness,employs highly effcient solar panel,top of the line rechargeable batteries. Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn.

360 Degrees Solar Photoelectric Road Mark Model: PCB-001/PCB-002 Patent No.: ZL2009 2 0175906.1 Product features: Brand: Cityeye Power supply: 3V 315Mw PCB-001-flash/3V 480Mw PCB-002-constant , solar cells (single crystal silicon) Energy storage device: 2*1.2v/1200mAH NI-Mh high Temperature rechargeable battery. Service time: Under the positive standard light intensity it is able to work for>160h(flash)/>60h(constant)Consecutively after it is charged for 8h in a single pass. Display mode: 360 degree warning,Flashing (1.33HZ 5%) and constant a Display color: Red,Yellow, Blue, White and Green Displayer element: Piranha ultra bright mist-resistant LED 3500~14000 MCD Body material: slip-proof extra strength plastic PC,bottom side package by polyepoxide,resist corrosion of water,oil,CCl4,UVand chemical substances Visual distance: 300 M Valid Service life: 5 years Protection level: 100% waterproof Operating environment: -20 ~ +70Ni-Mh,-40 ~ +85super capacitor Start control light intensity: light illumination less than 50 Lux from the positive side Specification: 100 Diameter * 58.5 High * Cateye Diameter 60 * Pavement elevation 19mm Anti-pressure capability: static pressure 35tafter contruction,resist impact by automobile wheels Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn Weight: 343 g/pcs Net weight: 36.4 Kg Gross weight: 38.0 Kg Warranty : 14 months Superiority: Green energy saving,ease of installation, does not destroy the landscape, roads and walls can be construction,warm brightness,employs highly effcient solar panel,top of the line rechargeable batteries. Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn.

Solar road stud Model no. Rs-702 Dimensions :132*122*20 (mm) Net weight 520(g) /500(g) Solar max. Output 0.35w Charge ability 118ma/hour Storage device type 1600mah ni-mh battery Type 8mm high intensity emitting diode Emission color yellow/white /red/blue/green Quantity 2pcs leds/1 side or 4pcs leds/2 sides Output-per led 11000mcd Leds Power current 14ma/hour Lighting way flash, steady, cascading effect Lighting time 50 hours after a standard luminous intensity day, 300 hours if battery charged fully Visibility (approx) 500m Operating temperature -25 to +75 degree c Main body upper part transparent polycarbonate Lower part die-cast aluminium alloy

YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF10 Product name YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 110mmÃ?110mmÃ?66mm Weight 138g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.