Gnss Rtk Receiver

Built-in BY682E GNSS high-precision positioning and heading board, support BDS: B1, B2; GPS: L1, L2C, L2P; GLONASS: G1, G2; QZSS: L1, L2; Support single-system or multi-system joint solution; Embed new generation of RTK algorithm engine, more intelligent built-in algorithms and more efficient RTK solutions; Support three vector RTK solution to further optimize the stability of positioning and heading under dynamic conditions; 9~36V wide voltage input with overcurrent and reverse connection protection; Two RS232 serial ports and one RJ54 ethernet port.

All-in-one Rover Solution for Network RTK The Magellan ProMark 200 is the most cost-effective dual-frequency network RTK rover. ProMark 200 solution includes the new Ashtech rugged GNSS receiver running Windows Mobile 6.5 operating system, the comprehensive Ashtech FAST Survey field software and the new Ashtech ASH-661 (L1/L2 GNSS) antenna. ProMark 200 is the most cost-effective dual-frequency network RTK solution from Ashtech. Embedded BLADE technology provides outstanding, longrange RTK performance, fast initialization and centimeter-level accuracy. Together with the comprehensive Ashtech FAST Survey field software, the ProMark 200 meets the demanding expectations from professional land surveyors. Ashtech ProMark 200 RTK rover includes extended wireless network communications, large memory, fast processor, Windows Mobile 6.5 operating system; all in a lightweight and very rugged handheld form factor for maximum mobility. The mix of exceptional RTK performance and compact design makes the ProMark 200 an extremely powerful and appealing network RTK rover solution.

Fully Automated Operation ing mode to be switchable between base and rover in the same receiver.In the V30 package, 2 watts HI-TARGET internal UHF radio and 1 watt Pacific Crest TrimTalk© internal UHF radio are optional for flexible use. 2 watts transceiver UHF radio is an excellent choice for UHF RTK operation. On the other hand, 1 watt transceiver UHF radio is to be used to have the V30 work with other brand¡¡¥s receiverhaving TrimTalk© compatible radios. Seamlessly Operation in CORS System With internal GPRS or 3G modem, the V30 works perfectly with corrections from CORS networks in any version of CMR, RTCM without needing to interpret the message but reading seamlessly. Long-life Battery Powered by 4400mAh Li-Ion battery. Static working time 13 - 15 hours RTK Rover(UHF/GPRS/3G) working time 10 - 12 hours RTK Base working time 8 - 10 hours Rugged Design, IP67 The special latching technology on flexible flat cables ensures trouble-free operation under impact or vibration. The V30 withstands 3 meters natural fall onto concrete. Field Controller and Software There are optional field controllers and software in the V30 package. The controllers with OS Microsoft Windows Mobile 6.5 are fully compatible with the third party software such as Carlson SurvCE, MicroSurveyFieldGenius, Digiterra Explorer, EsriArcPad etc. besides standard field&GIS software made by HI-TARGET. HI-TARGET controller with WiFi, Bluetooth, and GPRS/3G is completely wireless to connect to any device, collect data and connect to server simultaneously and seamlessly. Post-processing Software HI-TARGETGeomatics Office (HGO) software provides total GNSS solution with a complete suite of programs to support HI-TARGET GNSS receivers. Standard Rinex data and HI-TARGET raw data can be processed flexibly and easily. carton

Topcon gr-3 gps glonass rtk uhf with fc200 data collector complete Excellent condition and full work - 2 topcon gr-3 set base and rover internal uhf radio, gps, glonass full, l1, l2, cinderella, tx/rx - topcon fc-200 data collector with soft case and topcon 3d pocket software (v8.06) installed - 4 batteries - 2 chargers for both receivers + 1 for data collector - tribrach with bob laser + adapter - 2 whip antennas - usb cable for receivers - software download and gps manuals - post-processing program topcon tools

Trimble gps r8 model 3 gnss rtk system complete base and rover 450-470 mhz, with rx/tx function turned on. om receiver • 1x down load cable for data collector • 1x pelican case • 1x bi-pod Pentaland surveying equipment

Used condition trimble r8 model 2 gps l1 l2 l2c l5 gnss rtk tsc2 rover glonass 450-470 Trimble gps gnss r8 model 2 dual frequency rtk gps rover. This set up is in good condition and ready to go to work. It has a 450-470mhz frequency internal radio. It has been calibrated, tested and are ready to work out the box. The tsc2 is in good condition and loaded with 12.49 survey controller software. This unit tracks l1, l2, l2c, l5 and glonass satellites. This is a complete rover set. This sale includes: Rover -trimble r8-2 rover, 10hz update rate, dual frequency l1, l2, l2c, l5, gnss bluetooth, rtk capable, 450-470mhz internal radio Data collector -tsc2 data collector with 12.49 survey controller software, charger and case. - (2)batteries - (1)charger - collector cradle - cradle holder - cable - quick connect - case - carbon fiber rover rod - crain bi-pod. * we offering a 14 day money back guarantee for this unit * do not assume anything, if it is not shown in the pictures or written in the description, chances are, it does not come with it!

GPS + GLONASS Receivers (G-Mouse) - UART / TTL Interface GPS + GLONASS Receivers (G-Mouse) - RS232 Interface GPS + GLONASS Receivers (G-Mouse) - USB Interface GPS + BeiDou Receivers (G-Mouse) - UART / TTL Interface

New LEICA GS15 GNSS RTK Base and Rover CS15 Includes: - 2X 771503 LEICA GS15 Performance Receiver - 2X 767805 LOP2 GLONASS Option - 4X 772806 GEB212 Battery - 1X 810855 CS15 Field Controller - 1X 767874 CBC01 Lemo Connector Module with Power Jack - 1X 767909 SmartWorx Viva License Key - 1X 767879 GHT62 Pole Holder Base Plate - 1X 767880 GHT63 Clamp Arrangement - 1X 752292 GLS30 GNSS Telescopic Pole - 1X 799187 GKL341 Multi-bay Battery Charger - 1X 767856 MSD1000 Industrial Grade SD Memory Card 1GB - 2X 781646 SLR5 Satelline M3 TR1 403-470 Mhz RX/TX Radio - RTK Receive & Transmit UHF Radio Module - 2X 667243 GAT2 435MHz-470MHz Antenna - 1X 785703 GKL32 Battery Charger - 2X 767790 GAD108 Arm to Mount External UHF/GSM Antenna to GS14/GS15 - 1X 770715 GRT247 Carrier - 1X 399244 GST05 Wooden Tripod - 1X 798181 GDF112-1 Tribrach with Optical Plummet - 1X 667244 GZS4-1 Height Hook - 1X 758469 GEV219 1.8m Power Cable Connects External Battery GEB171 - 1X 727367 GEB171 External Battery - 1X 767827 GVP641 Hard Container - 1X 6003686 1 year Viva GNSS (GS10/14/15/25) Basic CCP - 1X 6003680 1 year Viva GNSS (GS10/14/15/25+CS+SW) Basic CCP complete package

Ashtech promark 800 gnss receiver Price/unit : usd 6, 205 Fedex, ups, dhl, tnt