There are different kinds of ceramic shaft and rods. They are high strength, heat-resistantance, wearable, unattackable, insulating in high-temperature, and used in power station pump, aquatic animals equipment and different kinds of stepping motor and so on.
Used for application such as dc fan, cpu cooling fan, high speed mechanism, navigation, low temperature engineering, etc. It is featured by lubrication, wear resistance, low noise, convenient assembly, long life span, low return loss, and impact resistance, etc.
Ceramic Shaft Sleeve for Slurry Pump and gravel pump is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throat bush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However, the weight of ceramic spare parts is only 1/3 of chrome spare parts. Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and downtime were reduced accordingly. slurry pump ceramic shaft sleeves are precision formed of high-density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower coefficient of friction, results in extended sleeve life and long service from the packing. offers part codes for ceramic shaft sleeves include: B075J04, B075J05, C075J04, C075J05, CH075J04, CH075J05, CH076J04, CH076J05, D075J04, D075J05, E075J04, E075J05, F075J04, F075J04, FAM075J04, FAM075J05, FAM076J04, FAM076J05, PE075J04, PE075J05, PF075J04, PF075J05, G075J04, G075G05, SH075J04, SH075J05, SH076J04,SH076J05, GH075J04, GH075J05, GH076J04, GH076J05.
shaft sleeve material: silicon nitride Silicon nitride shaft sleeve, wear-resistant, impact resistant, hardness higher than steel Silicon nitride (Si3N4), is an important structural ceramic material. It is a kind of superhard material, which has lubricity and wear resistance, and is atomic crystal; Oxidation resistance at high temperature. Moreover, it can resist cold and hot shock, and it will not break when heated to 1000 or more in the air, and then cooled and heated sharply. It is precisely because silicon nitride ceramics have such excellent characteristics that people often use it to manufacture mechanical components such as bearings, gas turbine blades, mechanical seal rings, permanent molds, pump bushings, etc.
There are different kinds of ceramic shaft and rods. They are high strength, heat-resistantance, wearable, unattackable, insulating in high-temperature, and used in power station pump, aquatic animals equipment and different kinds of stepping motor and so on. Used for application such as DC fan, CPU cooling fan, high speed mechanism, navigation, low temperature engineering, etc. It is featured by lubrication, wear resistance, low noise, convenient assembly, long life span, low return loss, and impact resistance, etc.
This products are widely used as the anti-wearing material on the surface of transmission equipment in oil industry, mining industry, steel industry and power industry, aiming to reisit the striking against the wall of pipeline when material going through, the erosion of the chemical, and thermal shocking . It will effectively prolong the service life of equipment, and considered to be the best choice of anti-wearing and anti-corrosion material.
Our company is a full service manufacturer of advanced ceramics components to customer specification. Our products include high purity alumina, zirconia, Si3N4 and machinable ceramics. Our focus is on providing cost effective solutions to wear and corrosion problems in a wide range of applications and industries, etc. We can machining ceramic rods, ceramic shaft and sleeve, ceramic plate, ceramic plunger, ceramic ring, ceramic valve, ceramic nozzle, Ceramic screw, ceramic Tube, etc. According customers' request.
We can supply you with many kinds of ceramic substrate, and they are widely used in electrical area, such as large scale integrated circuit, semiconductor package and so on. And material is 95%, 96%, 99%, 99.5% alumina, zirconia and zta. Features: Properties with excellent insulation, high mechanical strength, high thermal conductivity, low expansion coefficient, small dielectric constant, high-temperature resistance, excellent erosion and wear resistance, good quality in chemical shock heat and cold. 1. Size: on the request 2. All kinds of customized ceramic substrate are available in customized requirement.
Ceramic sleeves Adf seram²k kaynak ynznkler; 35 mm2 û 500 mm2] kes²t arali=indak² rgnln cu - al ²letkenler²n Kayna=inda kullanilmaktadir. Adf seram²k kaynak ynznkler²; - yuvarlak ve sekt÷r del²kl², - del²k tap ve ÷ltnler² hassas, - del²k ynzeylery dnzgnn ve pnrnzsnz, - yuvarlak del²k kenarlari pahli, - ynksek termal ¦oka dayanikli olarak, - standart ve ÷zel ÷ltnlerde nret²lmekted²r. Products Adf seram²k tubes for welding Are used at buttwelding of cu - al stranded Conductors in the cross-sectional Range of [0, 35 mm2 û 500 mm2] Adf seram²k tubes for welding Are manufactured as; - round and sector holes, - precise hole diameters and dimensions, - straight and smooth hole surfaces, - chamfered edges for round holes, - resistant to high thermal shock, - at standard and special dimensions. 100, 500 or 1000 pieces
1) Material:75% -99%AL203 or zirconia. 2) Temperature:1380C-1780C 3) Surface finish: fine polish 4) Features: a) Wear resistant b) Corrosion resistant c) Heat resistant. d) Stable dimensions e) lightweight, f) Long performance life Our factory services: 1, Consistent quality control 2, Quick delivery time 3, Excellent customer support 4, Made-to-order service available 5, Assured interchangeability 6, various material choices
1) Material:75% -99%AL203 or zirconia. 2) Temperature:1380C-1780C 3) Surface finish: fine polish 4) Features: a) Wear resistant b) Corrosion resistant c) Heat resistant. d) Stable dimensions e) lightweight, f) Long performance life Our factory services: 1, Consistent quality control 2, Quick delivery time 3, Excellent customer support 4, Made-to-order service available 5, Assured interchangeability 6, various material choices
